[DEFAULT] # # From heat.common.config # # Name of the engine node. This can be an opaque identifier. It is not # necessarily a hostname, FQDN, or IP address. (string value) #host = # List of directories to search for plug-ins. (list value) #plugin_dirs = /usr/lib64/heat,/usr/lib/heat,/usr/local/lib/heat,/usr/local/lib64/heat # The directory to search for environment files. (string value) #environment_dir = /etc/heat/environment.d # The directory to search for template files. (string value) #template_dir = /etc/heat/templates # DEPRECATED: Select deferred auth method, stored password or trusts. (string # value) # Possible values: # password - # trusts - # This option is deprecated for removal since 9.0.0. # Its value may be silently ignored in the future. # Reason: Stored password based deferred auth is broken when used with keystone # v3 and is not supported. #deferred_auth_method = trusts # Allow reauthentication on token expiry, such that long-running tasks may # complete. Note this defeats the expiry of any provided user tokens. (string # value) # Possible values: # '' - # trusts - #reauthentication_auth_method = # Subset of trustor roles to be delegated to heat. If left unset, all roles of # a user will be delegated to heat when creating a stack. (list value) #trusts_delegated_roles = # Maximum resources allowed per top-level stack. -1 stands for unlimited. # (integer value) #max_resources_per_stack = 1000 # Maximum number of stacks any one tenant may have active at one time. (integer # value) #max_stacks_per_tenant = 100 # Number of times to retry to bring a resource to a non-error state. Set to 0 # to disable retries. (integer value) #action_retry_limit = 5 # Number of times to retry when a client encounters an expected intermittent # error. Set to 0 to disable retries. (integer value) #client_retry_limit = 2 # Maximum length of a server name to be used in nova. (integer value) # Maximum value: 53 #max_server_name_length = 53 # Number of times to check whether an interface has been attached or detached. # (integer value) # Minimum value: 1 #max_interface_check_attempts = 10 # Controls how many events will be pruned whenever a stack's events are purged. # Set this lower to keep more events at the expense of more frequent purges. # (integer value) # Minimum value: 1 #event_purge_batch_size = 200 # Rough number of maximum events that will be available per stack. Actual # number of events can be a bit higher since purge checks take place randomly # 200/event_purge_batch_size percent of the time. Older events are deleted when # events are purged. Set to 0 for unlimited events per stack. (integer value) #max_events_per_stack = 1000 # Timeout in seconds for stack action (ie. create or update). (integer value) #stack_action_timeout = 3600 # The amount of time in seconds after an error has occurred that tasks may # continue to run before being cancelled. (integer value) #error_wait_time = 240 # RPC timeout for the engine liveness check that is used for stack locking. # (integer value) #engine_life_check_timeout = 2 # DEPRECATED: Enable the legacy OS::Heat::CWLiteAlarm resource. (boolean value) # This option is deprecated for removal since 10.0.0. # Its value may be silently ignored in the future. # Reason: Heat CloudWatch Service has been removed. #enable_cloud_watch_lite = false # Enable the preview Stack Abandon feature. (boolean value) #enable_stack_abandon = false # Enable the preview Stack Adopt feature. (boolean value) #enable_stack_adopt = false # Enables engine with convergence architecture. All stacks with this option # will be created using convergence engine. (boolean value) #convergence_engine = true # On update, enables heat to collect existing resource properties from reality # and converge to updated template. (boolean value) #observe_on_update = false # Template default for how the server should receive the metadata required for # software configuration. POLL_SERVER_CFN will allow calls to the cfn API # action DescribeStackResource authenticated with the provided keypair # (requires enabled heat-api-cfn). POLL_SERVER_HEAT will allow calls to the # Heat API resource-show using the provided keystone credentials (requires # keystone v3 API, and configured stack_user_* config options). POLL_TEMP_URL # will create and populate a Swift TempURL with metadata for polling (requires # object-store endpoint which supports TempURL).ZAQAR_MESSAGE will create a # dedicated zaqar queue and post the metadata for polling. (string value) # Possible values: # POLL_SERVER_CFN - # POLL_SERVER_HEAT - # POLL_TEMP_URL - # ZAQAR_MESSAGE - #default_software_config_transport = POLL_SERVER_CFN # Template default for how the server should signal to heat with the deployment # output values. CFN_SIGNAL will allow an HTTP POST to a CFN keypair signed URL # (requires enabled heat-api-cfn). TEMP_URL_SIGNAL will create a Swift TempURL # to be signaled via HTTP PUT (requires object-store endpoint which supports # TempURL). HEAT_SIGNAL will allow calls to the Heat API resource-signal using # the provided keystone credentials. ZAQAR_SIGNAL will create a dedicated zaqar # queue to be signaled using the provided keystone credentials. (string value) # Possible values: # CFN_SIGNAL - # TEMP_URL_SIGNAL - # HEAT_SIGNAL - # ZAQAR_SIGNAL - #default_deployment_signal_transport = CFN_SIGNAL # Template default for how the user_data should be formatted for the server. # For HEAT_CFNTOOLS, the user_data is bundled as part of the heat-cfntools # cloud-init boot configuration data. For RAW the user_data is passed to Nova # unmodified. For SOFTWARE_CONFIG user_data is bundled as part of the software # config data, and metadata is derived from any associated SoftwareDeployment # resources. (string value) # Possible values: # HEAT_CFNTOOLS - # RAW - # SOFTWARE_CONFIG - #default_user_data_format = HEAT_CFNTOOLS # Stacks containing these tag names will be hidden. Multiple tags should be # given in a comma-delimited list (eg. hidden_stack_tags=hide_me,me_too). (list # value) #hidden_stack_tags = data-processing-cluster # Deprecated. (string value) #onready = # When this feature is enabled, scheduler hints identifying the heat stack # context of a server or volume resource are passed to the configured # schedulers in nova and cinder, for creates done using heat resource types # OS::Cinder::Volume, OS::Nova::Server, and AWS::EC2::Instance. # heat_root_stack_id will be set to the id of the root stack of the resource, # heat_stack_id will be set to the id of the resource's parent stack, # heat_stack_name will be set to the name of the resource's parent stack, # heat_path_in_stack will be set to a list of comma delimited strings of # stackresourcename and stackname with list[0] being 'rootstackname', # heat_resource_name will be set to the resource's name, and heat_resource_uuid # will be set to the resource's orchestration id. (boolean value) #stack_scheduler_hints = false # Encrypt template parameters that were marked as hidden and also all the # resource properties before storing them in database. (boolean value) #encrypt_parameters_and_properties = false # Seconds between running periodic tasks. (integer value) #periodic_interval = 60 # URL of the Heat metadata server. NOTE: Setting this is only needed if you # require instances to use a different endpoint than in the keystone catalog # (string value) #heat_metadata_server_url = # URL of the Heat waitcondition server. (string value) #heat_waitcondition_server_url = # DEPRECATED: URL of the Heat CloudWatch server. (string value) # This option is deprecated for removal since 10.0.0. # Its value may be silently ignored in the future. # Reason: Heat CloudWatch Service has been removed. #heat_watch_server_url = # Instance connection to CFN/CW API via https. (string value) #instance_connection_is_secure = 0 # Instance connection to CFN/CW API validate certs if SSL is used. (string # value) #instance_connection_https_validate_certificates = 1 # Default region name used to get services endpoints. (string value) #region_name_for_services = # Keystone role for heat template-defined users. (string value) #heat_stack_user_role = heat_stack_user # Keystone domain ID which contains heat template-defined users. If this option # is set, stack_user_domain_name option will be ignored. (string value) # Deprecated group/name - [DEFAULT]/stack_user_domain #stack_user_domain_id = # Keystone domain name which contains heat template-defined users. If # `stack_user_domain_id` option is set, this option is ignored. (string value) #stack_user_domain_name = # Keystone username, a user with roles sufficient to manage users and projects # in the stack_user_domain. (string value) #stack_domain_admin = # Keystone password for stack_domain_admin user. (string value) #stack_domain_admin_password = # Maximum raw byte size of any template. (integer value) #max_template_size = 524288 # Maximum depth allowed when using nested stacks. (integer value) #max_nested_stack_depth = 5 # Number of heat-engine processes to fork and run. Will default to either to 4 # or number of CPUs on the host, whichever is greater. (integer value) #num_engine_workers = # # From heat.common.crypt # # Key used to encrypt authentication info in the database. Length of this key # must be 32 characters. (string value) #auth_encryption_key = notgood but just long enough i t # # From heat.common.wsgi # # Maximum raw byte size of JSON request body. Should be larger than # max_template_size. (integer value) #max_json_body_size = 1048576 # # From heat.engine.clients # # Fully qualified class name to use as a client backend. (string value) #cloud_backend = heat.engine.clients.OpenStackClients # # From heat.engine.clients.os.keystone.heat_keystoneclient # # Fully qualified class name to use as a keystone backend. (string value) #keystone_backend = heat.engine.clients.os.keystone.heat_keystoneclient.KsClientWrapper # # From heat.engine.notification # # Default notification level for outgoingnotifications. (string value) #default_notification_level = INFO # Default publisher_id for outgoing notifications. (string value) #default_publisher_id = # # From heat.engine.resources # # Custom template for the built-in loadbalancer nested stack. (string value) #loadbalancer_template = # # From oslo.log # # If set to true, the logging level will be set to DEBUG instead of the default # INFO level. (boolean value) # Note: This option can be changed without restarting. #debug = false # The name of a logging configuration file. This file is appended to any # existing logging configuration files. For details about logging configuration # files, see the Python logging module documentation. Note that when logging # configuration files are used then all logging configuration is set in the # configuration file and other logging configuration options are ignored (for # example, logging_context_format_string). (string value) # Note: This option can be changed without restarting. # Deprecated group/name - [DEFAULT]/log_config #log_config_append = # Defines the format string for %%(asctime)s in log records. Default: # %(default)s . This option is ignored if log_config_append is set. (string # value) #log_date_format = %Y-%m-%d %H:%M:%S # (Optional) Name of log file to send logging output to. If no default is set, # logging will go to stderr as defined by use_stderr. This option is ignored if # log_config_append is set. (string value) # Deprecated group/name - [DEFAULT]/logfile #log_file = # (Optional) The base directory used for relative log_file paths. This option # is ignored if log_config_append is set. (string value) # Deprecated group/name - [DEFAULT]/logdir #log_dir = # Uses logging handler designed to watch file system. When log file is moved or # removed this handler will open a new log file with specified path # instantaneously. It makes sense only if log_file option is specified and # Linux platform is used. This option is ignored if log_config_append is set. # (boolean value) #watch_log_file = false # Use syslog for logging. Existing syslog format is DEPRECATED and will be # changed later to honor RFC5424. This option is ignored if log_config_append # is set. (boolean value) #use_syslog = false # Enable journald for logging. If running in a systemd environment you may wish # to enable journal support. Doing so will use the journal native protocol # which includes structured metadata in addition to log messages.This option is # ignored if log_config_append is set. (boolean value) #use_journal = false # Syslog facility to receive log lines. This option is ignored if # log_config_append is set. (string value) #syslog_log_facility = LOG_USER # Use JSON formatting for logging. This option is ignored if log_config_append # is set. (boolean value) #use_json = false # Log output to standard error. This option is ignored if log_config_append is # set. (boolean value) #use_stderr = false # Format string to use for log messages with context. (string value) #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s # Format string to use for log messages when context is undefined. (string # value) #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s # Additional data to append to log message when logging level for the message # is DEBUG. (string value) #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d # Prefix each line of exception output with this format. (string value) #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s # Defines the format string for %(user_identity)s that is used in # logging_context_format_string. (string value) #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s # List of package logging levels in logger=LEVEL pairs. This option is ignored # if log_config_append is set. (list value) #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO # Enables or disables publication of error events. (boolean value) #publish_errors = false # The format for an instance that is passed with the log message. (string # value) #instance_format = "[instance: %(uuid)s] " # The format for an instance UUID that is passed with the log message. (string # value) #instance_uuid_format = "[instance: %(uuid)s] " # Interval, number of seconds, of log rate limiting. (integer value) #rate_limit_interval = 0 # Maximum number of logged messages per rate_limit_interval. (integer value) #rate_limit_burst = 0 # Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG # or empty string. Logs with level greater or equal to rate_limit_except_level # are not filtered. An empty string means that all levels are filtered. (string # value) #rate_limit_except_level = CRITICAL # Enables or disables fatal status of deprecations. (boolean value) #fatal_deprecations = false # # From oslo.messaging # # Size of RPC connection pool. (integer value) #rpc_conn_pool_size = 30 # The pool size limit for connections expiration policy (integer value) #conn_pool_min_size = 2 # The time-to-live in sec of idle connections in the pool (integer value) #conn_pool_ttl = 1200 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. # The "host" option should point or resolve to this address. (string value) #rpc_zmq_bind_address = * # MatchMaker driver. (string value) # Possible values: # redis - # sentinel - # dummy - #rpc_zmq_matchmaker = redis # Number of ZeroMQ contexts, defaults to 1. (integer value) #rpc_zmq_contexts = 1 # Maximum number of ingress messages to locally buffer per topic. Default is # unlimited. (integer value) #rpc_zmq_topic_backlog = # Directory for holding IPC sockets. (string value) #rpc_zmq_ipc_dir = /var/run/openstack # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match # "host" option, if running Nova. (string value) #rpc_zmq_host = localhost # Number of seconds to wait before all pending messages will be sent after # closing a socket. The default value of -1 specifies an infinite linger # period. The value of 0 specifies no linger period. Pending messages shall be # discarded immediately when the socket is closed. Positive values specify an # upper bound for the linger period. (integer value) # Deprecated group/name - [DEFAULT]/rpc_cast_timeout #zmq_linger = -1 # The default number of seconds that poll should wait. Poll raises timeout # exception when timeout expired. (integer value) #rpc_poll_timeout = 1 # Expiration timeout in seconds of a name service record about existing target # ( < 0 means no timeout). (integer value) #zmq_target_expire = 300 # Update period in seconds of a name service record about existing target. # (integer value) #zmq_target_update = 180 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean # value) #use_pub_sub = false # Use ROUTER remote proxy. (boolean value) #use_router_proxy = false # This option makes direct connections dynamic or static. It makes sense only # with use_router_proxy=False which means to use direct connections for direct # message types (ignored otherwise). (boolean value) #use_dynamic_connections = false # How many additional connections to a host will be made for failover reasons. # This option is actual only in dynamic connections mode. (integer value) #zmq_failover_connections = 2 # Minimal port number for random ports range. (port value) # Minimum value: 0 # Maximum value: 65535 #rpc_zmq_min_port = 49153 # Maximal port number for random ports range. (integer value) # Minimum value: 1 # Maximum value: 65536 #rpc_zmq_max_port = 65536 # Number of retries to find free port number before fail with ZMQBindError. # (integer value) #rpc_zmq_bind_port_retries = 100 # Default serialization mechanism for serializing/deserializing # outgoing/incoming messages (string value) # Possible values: # json - # msgpack - #rpc_zmq_serialization = json # This option configures round-robin mode in zmq socket. True means not keeping # a queue when server side disconnects. False means to keep queue and messages # even if server is disconnected, when the server appears we send all # accumulated messages to it. (boolean value) #zmq_immediate = true # Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any # other negative value) means to skip any overrides and leave it to OS default; # 0 and 1 (or any other positive value) mean to disable and enable the option # respectively. (integer value) #zmq_tcp_keepalive = -1 # The duration between two keepalive transmissions in idle condition. The unit # is platform dependent, for example, seconds in Linux, milliseconds in Windows # etc. The default value of -1 (or any other negative value and 0) means to # skip any overrides and leave it to OS default. (integer value) #zmq_tcp_keepalive_idle = -1 # The number of retransmissions to be carried out before declaring that remote # end is not available. The default value of -1 (or any other negative value # and 0) means to skip any overrides and leave it to OS default. (integer # value) #zmq_tcp_keepalive_cnt = -1 # The duration between two successive keepalive retransmissions, if # acknowledgement to the previous keepalive transmission is not received. The # unit is platform dependent, for example, seconds in Linux, milliseconds in # Windows etc. The default value of -1 (or any other negative value and 0) # means to skip any overrides and leave it to OS default. (integer value) #zmq_tcp_keepalive_intvl = -1 # Maximum number of (green) threads to work concurrently. (integer value) #rpc_thread_pool_size = 100 # Expiration timeout in seconds of a sent/received message after which it is # not tracked anymore by a client/server. (integer value) #rpc_message_ttl = 300 # Wait for message acknowledgements from receivers. This mechanism works only # via proxy without PUB/SUB. (boolean value) #rpc_use_acks = false # Number of seconds to wait for an ack from a cast/call. After each retry # attempt this timeout is multiplied by some specified multiplier. (integer # value) #rpc_ack_timeout_base = 15 # Number to multiply base ack timeout by after each retry attempt. (integer # value) #rpc_ack_timeout_multiplier = 2 # Default number of message sending attempts in case of any problems occurred: # positive value N means at most N retries, 0 means no retries, None or -1 (or # any other negative values) mean to retry forever. This option is used only if # acknowledgments are enabled. (integer value) #rpc_retry_attempts = 3 # List of publisher hosts SubConsumer can subscribe on. This option has higher # priority then the default publishers list taken from the matchmaker. (list # value) #subscribe_on = # Size of executor thread pool when executor is threading or eventlet. (integer # value) # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size #executor_thread_pool_size = 64 # Seconds to wait for a response from a call. (integer value) #rpc_response_timeout = 60 # The network address and optional user credentials for connecting to the # messaging backend, in URL format. The expected format is: # # driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query # # Example: rabbit://rabbitmq:password@127.0.0.1:5672// # # For full details on the fields in the URL see the documentation of # oslo_messaging.TransportURL at # https://docs.openstack.org/oslo.messaging/latest/reference/transport.html # (string value) #transport_url = # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers # include amqp and zmq. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rpc_backend = rabbit # The default exchange under which topics are scoped. May be overridden by an # exchange name specified in the transport_url option. (string value) #control_exchange = openstack # # From oslo.service.periodic_task # # Some periodic tasks can be run in a separate process. Should we run them # here? (boolean value) #run_external_periodic_tasks = true # # From oslo.service.service # # Enable eventlet backdoor. Acceptable values are 0, , and # :, where 0 results in listening on a random tcp port number; # results in listening on the specified port number (and not enabling # backdoor if that port is in use); and : results in listening on # the smallest unused port number within the specified range of port numbers. # The chosen port is displayed in the service's log file. (string value) #backdoor_port = # Enable eventlet backdoor, using the provided path as a unix socket that can # receive connections. This option is mutually exclusive with 'backdoor_port' # in that only one should be provided. If both are provided then the existence # of this option overrides the usage of that option. (string value) #backdoor_socket = # Enables or disables logging values of all registered options when starting a # service (at DEBUG level). (boolean value) #log_options = true # Specify a timeout after which a gracefully shutdown server will exit. Zero # value means endless wait. (integer value) #graceful_shutdown_timeout = 60 [auth_password] # # From heat.common.config # # Allow orchestration of multiple clouds. (boolean value) #multi_cloud = false # Allowed keystone endpoints for auth_uri when multi_cloud is enabled. At least # one endpoint needs to be specified. (list value) #allowed_auth_uris = [clients] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = publicURL # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = false [clients_aodh] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = [clients_barbican] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = [clients_ceilometer] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = [clients_cinder] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = # Allow client's debug log output. (boolean value) #http_log_debug = false [clients_designate] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = [clients_glance] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = [clients_heat] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = # Optional heat url in format like http://0.0.0.0:8004/v1/%(tenant_id)s. # (string value) #url = [clients_keystone] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = # Unversioned keystone url in format like http://0.0.0.0:5000. (string value) #auth_uri = [clients_magnum] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = [clients_manila] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = [clients_mistral] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = [clients_monasca] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = [clients_neutron] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = [clients_nova] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = # Allow client's debug log output. (boolean value) #http_log_debug = false [clients_octavia] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = [clients_sahara] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = [clients_senlin] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = [clients_swift] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = [clients_trove] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = [clients_zaqar] # # From heat.common.config # # Type of endpoint in Identity service catalog to use for communication with # the OpenStack service. (string value) #endpoint_type = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = [cors] # # From oslo.middleware # # Indicate whether this resource may be shared with the domain received in the # requests "origin" header. Format: "://[:]", no trailing # slash. Example: https://horizon.example.com (list value) #allowed_origin = # Indicate that the actual request can include user credentials (boolean value) #allow_credentials = true # Indicate which headers are safe to expose to the API. Defaults to HTTP Simple # Headers. (list value) #expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID # Maximum cache age of CORS preflight requests. (integer value) #max_age = 3600 # Indicate which methods can be used during the actual request. (list value) #allow_methods = GET,PUT,POST,DELETE,PATCH # Indicate which header field names may be used during the actual request. # (list value) #allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID [database] # # From oslo.db # # If True, SQLite uses synchronous mode. (boolean value) #sqlite_synchronous = true # The back end to use for the database. (string value) # Deprecated group/name - [DEFAULT]/db_backend #backend = sqlalchemy # The SQLAlchemy connection string to use to connect to the database. (string # value) # Deprecated group/name - [DEFAULT]/sql_connection # Deprecated group/name - [DATABASE]/sql_connection # Deprecated group/name - [sql]/connection #connection = # The SQLAlchemy connection string to use to connect to the slave database. # (string value) #slave_connection = # The SQL mode to be used for MySQL sessions. This option, including the # default, overrides any server-set SQL mode. To use whatever SQL mode is set # by the server configuration, set this to no value. Example: mysql_sql_mode= # (string value) #mysql_sql_mode = TRADITIONAL # If True, transparently enables support for handling MySQL Cluster (NDB). # (boolean value) #mysql_enable_ndb = false # Connections which have been present in the connection pool longer than this # number of seconds will be replaced with a new one the next time they are # checked out from the pool. (integer value) # Deprecated group/name - [DATABASE]/idle_timeout # Deprecated group/name - [database]/idle_timeout # Deprecated group/name - [DEFAULT]/sql_idle_timeout # Deprecated group/name - [DATABASE]/sql_idle_timeout # Deprecated group/name - [sql]/idle_timeout #connection_recycle_time = 3600 # Minimum number of SQL connections to keep open in a pool. (integer value) # Deprecated group/name - [DEFAULT]/sql_min_pool_size # Deprecated group/name - [DATABASE]/sql_min_pool_size #min_pool_size = 1 # Maximum number of SQL connections to keep open in a pool. Setting a value of # 0 indicates no limit. (integer value) # Deprecated group/name - [DEFAULT]/sql_max_pool_size # Deprecated group/name - [DATABASE]/sql_max_pool_size #max_pool_size = 5 # Maximum number of database connection retries during startup. Set to -1 to # specify an infinite retry count. (integer value) # Deprecated group/name - [DEFAULT]/sql_max_retries # Deprecated group/name - [DATABASE]/sql_max_retries #max_retries = 10 # Interval between retries of opening a SQL connection. (integer value) # Deprecated group/name - [DEFAULT]/sql_retry_interval # Deprecated group/name - [DATABASE]/reconnect_interval #retry_interval = 10 # If set, use this value for max_overflow with SQLAlchemy. (integer value) # Deprecated group/name - [DEFAULT]/sql_max_overflow # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow #max_overflow = 50 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer # value) # Minimum value: 0 # Maximum value: 100 # Deprecated group/name - [DEFAULT]/sql_connection_debug #connection_debug = 0 # Add Python stack traces to SQL as comment strings. (boolean value) # Deprecated group/name - [DEFAULT]/sql_connection_trace #connection_trace = false # If set, use this value for pool_timeout with SQLAlchemy. (integer value) # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout #pool_timeout = # Enable the experimental use of database reconnect on connection lost. # (boolean value) #use_db_reconnect = false # Seconds between retries of a database transaction. (integer value) #db_retry_interval = 1 # If True, increases the interval between retries of a database operation up to # db_max_retry_interval. (boolean value) #db_inc_retry_interval = true # If db_inc_retry_interval is set, the maximum seconds between retries of a # database operation. (integer value) #db_max_retry_interval = 10 # Maximum retries in case of connection error or deadlock error before error is # raised. Set to -1 to specify an infinite retry count. (integer value) #db_max_retries = 20 [ec2authtoken] # # From heat.api.aws.ec2token # # Authentication Endpoint URI. (string value) #auth_uri = # Allow orchestration of multiple clouds. (boolean value) #multi_cloud = false # Allowed keystone endpoints for auth_uri when multi_cloud is enabled. At least # one endpoint needs to be specified. (list value) #allowed_auth_uris = # Optional PEM-formatted certificate chain file. (string value) #cert_file = # Optional PEM-formatted file that contains the private key. (string value) #key_file = # Optional CA cert file to use in SSL connections. (string value) #ca_file = # If set, then the server's certificate will not be verified. (boolean value) #insecure = false [eventlet_opts] # # From heat.common.wsgi # # If False, closes the client socket connection explicitly. (boolean value) #wsgi_keep_alive = true # Timeout for client connections' socket operations. If an incoming connection # is idle for this number of seconds it will be closed. A value of '0' means # wait forever. (integer value) #client_socket_timeout = 900 [healthcheck] # # From oslo.middleware # # DEPRECATED: The path to respond to healtcheck requests on. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. #path = /healthcheck # Show more detailed information as part of the response (boolean value) #detailed = false # Additional backends that can perform health checks and report that # information back as part of a request. (list value) #backends = # Check the presence of a file to determine if an application is running on a # port. Used by DisableByFileHealthcheck plugin. (string value) #disable_by_file_path = # Check the presence of a file based on a port to determine if an application # is running on a port. Expects a "port:path" list of strings. Used by # DisableByFilesPortsHealthcheck plugin. (list value) #disable_by_file_paths = [heat_api] # # From heat.common.wsgi # # Address to bind the server. Useful when selecting a particular network # interface. (IP address value) #bind_host = 0.0.0.0 # The port on which the server will listen. (port value) # Minimum value: 0 # Maximum value: 65535 #bind_port = 8004 # Number of backlog requests to configure the socket with. (integer value) #backlog = 4096 # Location of the SSL certificate file to use for SSL mode. (string value) #cert_file = # Location of the SSL key file to use for enabling SSL mode. (string value) #key_file = # Number of workers for Heat service. Default value 0 means, that service will # start number of workers equal number of cores on server. (integer value) # Minimum value: 0 #workers = 0 # Maximum line size of message headers to be accepted. max_header_line may need # to be increased when using large tokens (typically those generated by the # Keystone v3 API with big service catalogs). (integer value) #max_header_line = 16384 # The value for the socket option TCP_KEEPIDLE. This is the time in seconds # that the connection must be idle before TCP starts sending keepalive probes. # (integer value) #tcp_keepidle = 600 [heat_api_cfn] # # From heat.common.wsgi # # Address to bind the server. Useful when selecting a particular network # interface. (IP address value) #bind_host = 0.0.0.0 # The port on which the server will listen. (port value) # Minimum value: 0 # Maximum value: 65535 #bind_port = 8000 # Number of backlog requests to configure the socket with. (integer value) #backlog = 4096 # Location of the SSL certificate file to use for SSL mode. (string value) #cert_file = # Location of the SSL key file to use for enabling SSL mode. (string value) #key_file = # Number of workers for Heat service. (integer value) # Minimum value: 0 #workers = 1 # Maximum line size of message headers to be accepted. max_header_line may need # to be increased when using large tokens (typically those generated by the # Keystone v3 API with big service catalogs). (integer value) #max_header_line = 16384 # The value for the socket option TCP_KEEPIDLE. This is the time in seconds # that the connection must be idle before TCP starts sending keepalive probes. # (integer value) #tcp_keepidle = 600 [heat_api_cloudwatch] # # From heat.common.wsgi # # DEPRECATED: Address to bind the server. Useful when selecting a particular # network interface. (IP address value) # This option is deprecated for removal since 10.0.0. # Its value may be silently ignored in the future. # Reason: Heat CloudWatch API has been removed. #bind_host = 0.0.0.0 # DEPRECATED: The port on which the server will listen. (port value) # Minimum value: 0 # Maximum value: 65535 # This option is deprecated for removal since 10.0.0. # Its value may be silently ignored in the future. # Reason: Heat CloudWatch API has been removed. #bind_port = 8003 # DEPRECATED: Number of backlog requests to configure the socket with. (integer # value) # This option is deprecated for removal since 10.0.0. # Its value may be silently ignored in the future. # Reason: Heat CloudWatch API has been removed. #backlog = 4096 # DEPRECATED: Location of the SSL certificate file to use for SSL mode. (string # value) # This option is deprecated for removal since 10.0.0. # Its value may be silently ignored in the future. # Reason: Heat CloudWatch API has been Removed. #cert_file = # DEPRECATED: Location of the SSL key file to use for enabling SSL mode. # (string value) # This option is deprecated for removal since 10.0.0. # Its value may be silently ignored in the future. # Reason: Heat CloudWatch API has been Removed. #key_file = # DEPRECATED: Number of workers for Heat service. (integer value) # Minimum value: 0 # This option is deprecated for removal since 10.0.0. # Its value may be silently ignored in the future. # Reason: Heat CloudWatch API has been Removed. #workers = 1 # DEPRECATED: Maximum line size of message headers to be accepted. # max_header_line may need to be increased when using large tokens (typically # those generated by the Keystone v3 API with big service catalogs.) (integer # value) # This option is deprecated for removal since 10.0.0. # Its value may be silently ignored in the future. # Reason: Heat CloudWatch API has been Removed. #max_header_line = 16384 # DEPRECATED: The value for the socket option TCP_KEEPIDLE. This is the time # in seconds that the connection must be idle before TCP starts sending # keepalive probes. (integer value) # This option is deprecated for removal since 10.0.0. # Its value may be silently ignored in the future. # Reason: Heat CloudWatch API has been Removed. #tcp_keepidle = 600 [keystone_authtoken] # # From keystonemiddleware.auth_token # # Complete "public" Identity API endpoint. This endpoint should not be an # "admin" endpoint, as it should be accessible by all end users. # Unauthenticated clients are redirected to this endpoint to authenticate. # Although this endpoint should ideally be unversioned, client support in the # wild varies. If you're using a versioned v2 endpoint here, then this should # *not* be the same endpoint the service user utilizes for validating tokens, # because normal end users may not be able to reach that endpoint. (string # value) # Deprecated group/name - [keystone_authtoken]/auth_uri #www_authenticate_uri = # DEPRECATED: Complete "public" Identity API endpoint. This endpoint should not # be an "admin" endpoint, as it should be accessible by all end users. # Unauthenticated clients are redirected to this endpoint to authenticate. # Although this endpoint should ideally be unversioned, client support in the # wild varies. If you're using a versioned v2 endpoint here, then this should # *not* be the same endpoint the service user utilizes for validating tokens, # because normal end users may not be able to reach that endpoint. This option # is deprecated in favor of www_authenticate_uri and will be removed in the S # release. (string value) # This option is deprecated for removal since Queens. # Its value may be silently ignored in the future. # Reason: The auth_uri option is deprecated in favor of www_authenticate_uri # and will be removed in the S release. #auth_uri = # API version of the admin Identity API endpoint. (string value) #auth_version = # Do not handle authorization requests within the middleware, but delegate the # authorization decision to downstream WSGI components. (boolean value) #delay_auth_decision = false # Request timeout value for communicating with Identity API server. (integer # value) #http_connect_timeout = # How many times are we trying to reconnect when communicating with Identity # API Server. (integer value) #http_request_max_retries = 3 # Request environment key where the Swift cache object is stored. When # auth_token middleware is deployed with a Swift cache, use this option to have # the middleware share a caching backend with swift. Otherwise, use the # ``memcached_servers`` option instead. (string value) #cache = # Required if identity server requires client certificate (string value) #certfile = # Required if identity server requires client certificate (string value) #keyfile = # A PEM encoded Certificate Authority to use when verifying HTTPs connections. # Defaults to system CAs. (string value) #cafile = # Verify HTTPS connections. (boolean value) #insecure = false # The region in which the identity server can be found. (string value) #region_name = # DEPRECATED: Directory used to cache files related to PKI tokens. This option # has been deprecated in the Ocata release and will be removed in the P # release. (string value) # This option is deprecated for removal since Ocata. # Its value may be silently ignored in the future. # Reason: PKI token format is no longer supported. #signing_dir = # Optionally specify a list of memcached server(s) to use for caching. If left # undefined, tokens will instead be cached in-process. (list value) # Deprecated group/name - [keystone_authtoken]/memcache_servers #memcached_servers = # In order to prevent excessive effort spent validating tokens, the middleware # caches previously-seen tokens for a configurable duration (in seconds). Set # to -1 to disable caching completely. (integer value) #token_cache_time = 300 # DEPRECATED: Determines the frequency at which the list of revoked tokens is # retrieved from the Identity service (in seconds). A high number of revocation # events combined with a low cache duration may significantly reduce # performance. Only valid for PKI tokens. This option has been deprecated in # the Ocata release and will be removed in the P release. (integer value) # This option is deprecated for removal since Ocata. # Its value may be silently ignored in the future. # Reason: PKI token format is no longer supported. #revocation_cache_time = 10 # (Optional) If defined, indicate whether token data should be authenticated or # authenticated and encrypted. If MAC, token data is authenticated (with HMAC) # in the cache. If ENCRYPT, token data is encrypted and authenticated in the # cache. If the value is not one of these options or empty, auth_token will # raise an exception on initialization. (string value) # Possible values: # None - # MAC - # ENCRYPT - #memcache_security_strategy = None # (Optional, mandatory if memcache_security_strategy is defined) This string is # used for key derivation. (string value) #memcache_secret_key = # (Optional) Number of seconds memcached server is considered dead before it is # tried again. (integer value) #memcache_pool_dead_retry = 300 # (Optional) Maximum total number of open connections to every memcached # server. (integer value) #memcache_pool_maxsize = 10 # (Optional) Socket timeout in seconds for communicating with a memcached # server. (integer value) #memcache_pool_socket_timeout = 3 # (Optional) Number of seconds a connection to memcached is held unused in the # pool before it is closed. (integer value) #memcache_pool_unused_timeout = 60 # (Optional) Number of seconds that an operation will wait to get a memcached # client connection from the pool. (integer value) #memcache_pool_conn_get_timeout = 10 # (Optional) Use the advanced (eventlet safe) memcached client pool. The # advanced pool will only work under python 2.x. (boolean value) #memcache_use_advanced_pool = false # (Optional) Indicate whether to set the X-Service-Catalog header. If False, # middleware will not ask for service catalog on token validation and will not # set the X-Service-Catalog header. (boolean value) #include_service_catalog = true # Used to control the use and type of token binding. Can be set to: "disabled" # to not check token binding. "permissive" (default) to validate binding # information if the bind type is of a form known to the server and ignore it # if not. "strict" like "permissive" but if the bind type is unknown the token # will be rejected. "required" any form of token binding is needed to be # allowed. Finally the name of a binding method that must be present in tokens. # (string value) #enforce_token_bind = permissive # DEPRECATED: If true, the revocation list will be checked for cached tokens. # This requires that PKI tokens are configured on the identity server. (boolean # value) # This option is deprecated for removal since Ocata. # Its value may be silently ignored in the future. # Reason: PKI token format is no longer supported. #check_revocations_for_cached = false # DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a # single algorithm or multiple. The algorithms are those supported by Python # standard hashlib.new(). The hashes will be tried in the order given, so put # the preferred one first for performance. The result of the first hash will be # stored in the cache. This will typically be set to multiple values only while # migrating from a less secure algorithm to a more secure one. Once all the old # tokens are expired this option should be set to a single value for better # performance. (list value) # This option is deprecated for removal since Ocata. # Its value may be silently ignored in the future. # Reason: PKI token format is no longer supported. #hash_algorithms = md5 # A choice of roles that must be present in a service token. Service tokens are # allowed to request that an expired token can be used and so this check should # tightly control that only actual services should be sending this token. Roles # here are applied as an ANY check so any role in this list must be present. # For backwards compatibility reasons this currently only affects the # allow_expired check. (list value) #service_token_roles = service # For backwards compatibility reasons we must let valid service tokens pass # that don't pass the service_token_roles check as valid. Setting this true # will become the default in a future release and should be enabled if # possible. (boolean value) #service_token_roles_required = false # Authentication type to load (string value) # Deprecated group/name - [keystone_authtoken]/auth_plugin #auth_type = # Config Section from which to load plugin specific options (string value) #auth_section = [matchmaker_redis] # # From oslo.messaging # # DEPRECATED: Host to locate redis. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #host = 127.0.0.1 # DEPRECATED: Use this port to connect to redis host. (port value) # Minimum value: 0 # Maximum value: 65535 # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #port = 6379 # DEPRECATED: Password for Redis server (optional). (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #password = # DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g., # [host:port, host1:port ... ] (list value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #sentinel_hosts = # Redis replica set name. (string value) #sentinel_group_name = oslo-messaging-zeromq # Time in ms to wait between connection attempts. (integer value) #wait_timeout = 2000 # Time in ms to wait before the transaction is killed. (integer value) #check_timeout = 20000 # Timeout in ms on blocking socket operations. (integer value) #socket_timeout = 10000 [noauth] # # From heat.common.config # # JSON file containing the content returned by the noauth middleware. (string # value) #token_response = [oslo_messaging_amqp] # # From oslo.messaging # # Name for the AMQP container. must be globally unique. Defaults to a generated # UUID (string value) #container_name = # Timeout for inactive connections (in seconds) (integer value) #idle_timeout = 0 # Debug: dump AMQP frames to stdout (boolean value) #trace = false # Attempt to connect via SSL. If no other ssl-related parameters are given, it # will use the system's CA-bundle to verify the server's certificate. (boolean # value) #ssl = false # CA certificate PEM file used to verify the server's certificate (string # value) #ssl_ca_file = # Self-identifying certificate PEM file for client authentication (string # value) #ssl_cert_file = # Private key PEM file used to sign ssl_cert_file certificate (optional) # (string value) #ssl_key_file = # Password for decrypting ssl_key_file (if encrypted) (string value) #ssl_key_password = # By default SSL checks that the name in the server's certificate matches the # hostname in the transport_url. In some configurations it may be preferable to # use the virtual hostname instead, for example if the server uses the Server # Name Indication TLS extension (rfc6066) to provide a certificate per virtual # host. Set ssl_verify_vhost to True if the server's SSL certificate uses the # virtual host name instead of the DNS name. (boolean value) #ssl_verify_vhost = false # DEPRECATED: Accept clients using either SSL or plain TCP (boolean value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Not applicable - not a SSL server #allow_insecure_clients = false # Space separated list of acceptable SASL mechanisms (string value) #sasl_mechanisms = # Path to directory that contains the SASL configuration (string value) #sasl_config_dir = # Name of configuration file (without .conf suffix) (string value) #sasl_config_name = # SASL realm to use if no realm present in username (string value) #sasl_default_realm = # DEPRECATED: User name for message broker authentication (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Should use configuration option transport_url to provide the # username. #username = # DEPRECATED: Password for message broker authentication (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Should use configuration option transport_url to provide the # password. #password = # Seconds to pause before attempting to re-connect. (integer value) # Minimum value: 1 #connection_retry_interval = 1 # Increase the connection_retry_interval by this many seconds after each # unsuccessful failover attempt. (integer value) # Minimum value: 0 #connection_retry_backoff = 2 # Maximum limit for connection_retry_interval + connection_retry_backoff # (integer value) # Minimum value: 1 #connection_retry_interval_max = 30 # Time to pause between re-connecting an AMQP 1.0 link that failed due to a # recoverable error. (integer value) # Minimum value: 1 #link_retry_delay = 10 # The maximum number of attempts to re-send a reply message which failed due to # a recoverable error. (integer value) # Minimum value: -1 #default_reply_retry = 0 # The deadline for an rpc reply message delivery. (integer value) # Minimum value: 5 #default_reply_timeout = 30 # The deadline for an rpc cast or call message delivery. Only used when caller # does not provide a timeout expiry. (integer value) # Minimum value: 5 #default_send_timeout = 30 # The deadline for a sent notification message delivery. Only used when caller # does not provide a timeout expiry. (integer value) # Minimum value: 5 #default_notify_timeout = 30 # The duration to schedule a purge of idle sender links. Detach link after # expiry. (integer value) # Minimum value: 1 #default_sender_link_timeout = 600 # Indicates the addressing mode used by the driver. # Permitted values: # 'legacy' - use legacy non-routable addressing # 'routable' - use routable addresses # 'dynamic' - use legacy addresses if the message bus does not support routing # otherwise use routable addressing (string value) #addressing_mode = dynamic # Enable virtual host support for those message buses that do not natively # support virtual hosting (such as qpidd). When set to true the virtual host # name will be added to all message bus addresses, effectively creating a # private 'subnet' per virtual host. Set to False if the message bus supports # virtual hosting using the 'hostname' field in the AMQP 1.0 Open performative # as the name of the virtual host. (boolean value) #pseudo_vhost = true # address prefix used when sending to a specific server (string value) #server_request_prefix = exclusive # address prefix used when broadcasting to all servers (string value) #broadcast_prefix = broadcast # address prefix when sending to any server in group (string value) #group_request_prefix = unicast # Address prefix for all generated RPC addresses (string value) #rpc_address_prefix = openstack.org/om/rpc # Address prefix for all generated Notification addresses (string value) #notify_address_prefix = openstack.org/om/notify # Appended to the address prefix when sending a fanout message. Used by the # message bus to identify fanout messages. (string value) #multicast_address = multicast # Appended to the address prefix when sending to a particular RPC/Notification # server. Used by the message bus to identify messages sent to a single # destination. (string value) #unicast_address = unicast # Appended to the address prefix when sending to a group of consumers. Used by # the message bus to identify messages that should be delivered in a round- # robin fashion across consumers. (string value) #anycast_address = anycast # Exchange name used in notification addresses. # Exchange name resolution precedence: # Target.exchange if set # else default_notification_exchange if set # else control_exchange if set # else 'notify' (string value) #default_notification_exchange = # Exchange name used in RPC addresses. # Exchange name resolution precedence: # Target.exchange if set # else default_rpc_exchange if set # else control_exchange if set # else 'rpc' (string value) #default_rpc_exchange = # Window size for incoming RPC Reply messages. (integer value) # Minimum value: 1 #reply_link_credit = 200 # Window size for incoming RPC Request messages (integer value) # Minimum value: 1 #rpc_server_credit = 100 # Window size for incoming Notification messages (integer value) # Minimum value: 1 #notify_server_credit = 100 # Send messages of this type pre-settled. # Pre-settled messages will not receive acknowledgement # from the peer. Note well: pre-settled messages may be # silently discarded if the delivery fails. # Permitted values: # 'rpc-call' - send RPC Calls pre-settled # 'rpc-reply'- send RPC Replies pre-settled # 'rpc-cast' - Send RPC Casts pre-settled # 'notify' - Send Notifications pre-settled # (multi valued) #pre_settled = rpc-cast #pre_settled = rpc-reply [oslo_messaging_kafka] # # From oslo.messaging # # DEPRECATED: Default Kafka broker Host (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #kafka_default_host = localhost # DEPRECATED: Default Kafka broker Port (port value) # Minimum value: 0 # Maximum value: 65535 # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #kafka_default_port = 9092 # Max fetch bytes of Kafka consumer (integer value) #kafka_max_fetch_bytes = 1048576 # Default timeout(s) for Kafka consumers (floating point value) #kafka_consumer_timeout = 1.0 # DEPRECATED: Pool Size for Kafka Consumers (integer value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Driver no longer uses connection pool. #pool_size = 10 # DEPRECATED: The pool size limit for connections expiration policy (integer # value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Driver no longer uses connection pool. #conn_pool_min_size = 2 # DEPRECATED: The time-to-live in sec of idle connections in the pool (integer # value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Driver no longer uses connection pool. #conn_pool_ttl = 1200 # Group id for Kafka consumer. Consumers in one group will coordinate message # consumption (string value) #consumer_group = oslo_messaging_consumer # Upper bound on the delay for KafkaProducer batching in seconds (floating # point value) #producer_batch_timeout = 0.0 # Size of batch for the producer async send (integer value) #producer_batch_size = 16384 [oslo_messaging_notifications] # # From oslo.messaging # # The Drivers(s) to handle sending notifications. Possible values are # messaging, messagingv2, routing, log, test, noop (multi valued) # Deprecated group/name - [DEFAULT]/notification_driver #driver = # A URL representing the messaging driver to use for notifications. If not set, # we fall back to the same configuration used for RPC. (string value) # Deprecated group/name - [DEFAULT]/notification_transport_url #transport_url = # AMQP topic used for OpenStack notifications. (list value) # Deprecated group/name - [rpc_notifier2]/topics # Deprecated group/name - [DEFAULT]/notification_topics #topics = notifications # The maximum number of attempts to re-send a notification message which failed # to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite # (integer value) #retry = -1 [oslo_messaging_rabbit] # # From oslo.messaging # # Use durable queues in AMQP. (boolean value) # Deprecated group/name - [DEFAULT]/amqp_durable_queues # Deprecated group/name - [DEFAULT]/rabbit_durable_queues #amqp_durable_queues = false # Auto-delete queues in AMQP. (boolean value) #amqp_auto_delete = false # Enable SSL (boolean value) #ssl = # SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and # SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some # distributions. (string value) # Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_version #ssl_version = # SSL key file (valid only if SSL enabled). (string value) # Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_keyfile #ssl_key_file = # SSL cert file (valid only if SSL enabled). (string value) # Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_certfile #ssl_cert_file = # SSL certification authority file (valid only if SSL enabled). (string value) # Deprecated group/name - [oslo_messaging_rabbit]/kombu_ssl_ca_certs #ssl_ca_file = # How long to wait before reconnecting in response to an AMQP consumer cancel # notification. (floating point value) #kombu_reconnect_delay = 1.0 # EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not # be used. This option may not be available in future versions. (string value) #kombu_compression = # How long to wait a missing client before abandoning to send it its replies. # This value should not be longer than rpc_response_timeout. (integer value) # Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout #kombu_missing_consumer_retry_timeout = 60 # Determines how the next RabbitMQ node is chosen in case the one we are # currently connected to becomes unavailable. Takes effect only if more than # one RabbitMQ node is provided in config. (string value) # Possible values: # round-robin - # shuffle - #kombu_failover_strategy = round-robin # DEPRECATED: The RabbitMQ broker address where a single node is used. (string # value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rabbit_host = localhost # DEPRECATED: The RabbitMQ broker port where a single node is used. (port # value) # Minimum value: 0 # Maximum value: 65535 # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rabbit_port = 5672 # DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rabbit_hosts = $rabbit_host:$rabbit_port # DEPRECATED: The RabbitMQ userid. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rabbit_userid = guest # DEPRECATED: The RabbitMQ password. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rabbit_password = guest # The RabbitMQ login method. (string value) # Possible values: # PLAIN - # AMQPLAIN - # RABBIT-CR-DEMO - #rabbit_login_method = AMQPLAIN # DEPRECATED: The RabbitMQ virtual host. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rabbit_virtual_host = / # How frequently to retry connecting with RabbitMQ. (integer value) #rabbit_retry_interval = 1 # How long to backoff for between retries when connecting to RabbitMQ. (integer # value) #rabbit_retry_backoff = 2 # Maximum interval of RabbitMQ connection retries. Default is 30 seconds. # (integer value) #rabbit_interval_max = 30 # DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0 # (infinite retry count). (integer value) # This option is deprecated for removal. # Its value may be silently ignored in the future. #rabbit_max_retries = 0 # Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this # option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring # is no longer controlled by the x-ha-policy argument when declaring a queue. # If you just want to make sure that all queues (except those with auto- # generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy # HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value) #rabbit_ha_queues = false # Positive integer representing duration in seconds for queue TTL (x-expires). # Queues which are unused for the duration of the TTL are automatically # deleted. The parameter affects only reply and fanout queues. (integer value) # Minimum value: 1 #rabbit_transient_queues_ttl = 1800 # Specifies the number of messages to prefetch. Setting to zero allows # unlimited messages. (integer value) #rabbit_qos_prefetch_count = 0 # Number of seconds after which the Rabbit broker is considered down if # heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer # value) #heartbeat_timeout_threshold = 60 # How often times during the heartbeat_timeout_threshold we check the # heartbeat. (integer value) #heartbeat_rate = 2 # Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value) #fake_rabbit = false # Maximum number of channels to allow (integer value) #channel_max = # The maximum byte size for an AMQP frame (integer value) #frame_max = # How often to send heartbeats for consumer's connections (integer value) #heartbeat_interval = 3 # Arguments passed to ssl.wrap_socket (dict value) #ssl_options = # Set socket timeout in seconds for connection's socket (floating point value) #socket_timeout = 0.25 # Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point # value) #tcp_user_timeout = 0.25 # Set delay for reconnection to some host which has connection error (floating # point value) #host_connection_reconnect_delay = 0.25 # Connection factory implementation (string value) # Possible values: # new - # single - # read_write - #connection_factory = single # Maximum number of connections to keep queued. (integer value) #pool_max_size = 30 # Maximum number of connections to create above `pool_max_size`. (integer # value) #pool_max_overflow = 0 # Default number of seconds to wait for a connections to available (integer # value) #pool_timeout = 30 # Lifetime of a connection (since creation) in seconds or None for no # recycling. Expired connections are closed on acquire. (integer value) #pool_recycle = 600 # Threshold at which inactive (since release) connections are considered stale # in seconds or None for no staleness. Stale connections are closed on acquire. # (integer value) #pool_stale = 60 # Default serialization mechanism for serializing/deserializing # outgoing/incoming messages (string value) # Possible values: # json - # msgpack - #default_serializer_type = json # Persist notification messages. (boolean value) #notification_persistence = false # Exchange name for sending notifications (string value) #default_notification_exchange = ${control_exchange}_notification # Max number of not acknowledged message which RabbitMQ can send to # notification listener. (integer value) #notification_listener_prefetch_count = 100 # Reconnecting retry count in case of connectivity problem during sending # notification, -1 means infinite retry. (integer value) #default_notification_retry_attempts = -1 # Reconnecting retry delay in case of connectivity problem during sending # notification message (floating point value) #notification_retry_delay = 0.25 # Time to live for rpc queues without consumers in seconds. (integer value) #rpc_queue_expiration = 60 # Exchange name for sending RPC messages (string value) #default_rpc_exchange = ${control_exchange}_rpc # Exchange name for receiving RPC replies (string value) #rpc_reply_exchange = ${control_exchange}_rpc_reply # Max number of not acknowledged message which RabbitMQ can send to rpc # listener. (integer value) #rpc_listener_prefetch_count = 100 # Max number of not acknowledged message which RabbitMQ can send to rpc reply # listener. (integer value) #rpc_reply_listener_prefetch_count = 100 # Reconnecting retry count in case of connectivity problem during sending # reply. -1 means infinite retry during rpc_timeout (integer value) #rpc_reply_retry_attempts = -1 # Reconnecting retry delay in case of connectivity problem during sending # reply. (floating point value) #rpc_reply_retry_delay = 0.25 # Reconnecting retry count in case of connectivity problem during sending RPC # message, -1 means infinite retry. If actual retry attempts in not 0 the rpc # request could be processed more than one time (integer value) #default_rpc_retry_attempts = -1 # Reconnecting retry delay in case of connectivity problem during sending RPC # message (floating point value) #rpc_retry_delay = 0.25 [oslo_messaging_zmq] # # From oslo.messaging # # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. # The "host" option should point or resolve to this address. (string value) #rpc_zmq_bind_address = * # MatchMaker driver. (string value) # Possible values: # redis - # sentinel - # dummy - #rpc_zmq_matchmaker = redis # Number of ZeroMQ contexts, defaults to 1. (integer value) #rpc_zmq_contexts = 1 # Maximum number of ingress messages to locally buffer per topic. Default is # unlimited. (integer value) #rpc_zmq_topic_backlog = # Directory for holding IPC sockets. (string value) #rpc_zmq_ipc_dir = /var/run/openstack # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match # "host" option, if running Nova. (string value) #rpc_zmq_host = localhost # Number of seconds to wait before all pending messages will be sent after # closing a socket. The default value of -1 specifies an infinite linger # period. The value of 0 specifies no linger period. Pending messages shall be # discarded immediately when the socket is closed. Positive values specify an # upper bound for the linger period. (integer value) # Deprecated group/name - [DEFAULT]/rpc_cast_timeout #zmq_linger = -1 # The default number of seconds that poll should wait. Poll raises timeout # exception when timeout expired. (integer value) #rpc_poll_timeout = 1 # Expiration timeout in seconds of a name service record about existing target # ( < 0 means no timeout). (integer value) #zmq_target_expire = 300 # Update period in seconds of a name service record about existing target. # (integer value) #zmq_target_update = 180 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean # value) #use_pub_sub = false # Use ROUTER remote proxy. (boolean value) #use_router_proxy = false # This option makes direct connections dynamic or static. It makes sense only # with use_router_proxy=False which means to use direct connections for direct # message types (ignored otherwise). (boolean value) #use_dynamic_connections = false # How many additional connections to a host will be made for failover reasons. # This option is actual only in dynamic connections mode. (integer value) #zmq_failover_connections = 2 # Minimal port number for random ports range. (port value) # Minimum value: 0 # Maximum value: 65535 #rpc_zmq_min_port = 49153 # Maximal port number for random ports range. (integer value) # Minimum value: 1 # Maximum value: 65536 #rpc_zmq_max_port = 65536 # Number of retries to find free port number before fail with ZMQBindError. # (integer value) #rpc_zmq_bind_port_retries = 100 # Default serialization mechanism for serializing/deserializing # outgoing/incoming messages (string value) # Possible values: # json - # msgpack - #rpc_zmq_serialization = json # This option configures round-robin mode in zmq socket. True means not keeping # a queue when server side disconnects. False means to keep queue and messages # even if server is disconnected, when the server appears we send all # accumulated messages to it. (boolean value) #zmq_immediate = true # Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any # other negative value) means to skip any overrides and leave it to OS default; # 0 and 1 (or any other positive value) mean to disable and enable the option # respectively. (integer value) #zmq_tcp_keepalive = -1 # The duration between two keepalive transmissions in idle condition. The unit # is platform dependent, for example, seconds in Linux, milliseconds in Windows # etc. The default value of -1 (or any other negative value and 0) means to # skip any overrides and leave it to OS default. (integer value) #zmq_tcp_keepalive_idle = -1 # The number of retransmissions to be carried out before declaring that remote # end is not available. The default value of -1 (or any other negative value # and 0) means to skip any overrides and leave it to OS default. (integer # value) #zmq_tcp_keepalive_cnt = -1 # The duration between two successive keepalive retransmissions, if # acknowledgement to the previous keepalive transmission is not received. The # unit is platform dependent, for example, seconds in Linux, milliseconds in # Windows etc. The default value of -1 (or any other negative value and 0) # means to skip any overrides and leave it to OS default. (integer value) #zmq_tcp_keepalive_intvl = -1 # Maximum number of (green) threads to work concurrently. (integer value) #rpc_thread_pool_size = 100 # Expiration timeout in seconds of a sent/received message after which it is # not tracked anymore by a client/server. (integer value) #rpc_message_ttl = 300 # Wait for message acknowledgements from receivers. This mechanism works only # via proxy without PUB/SUB. (boolean value) #rpc_use_acks = false # Number of seconds to wait for an ack from a cast/call. After each retry # attempt this timeout is multiplied by some specified multiplier. (integer # value) #rpc_ack_timeout_base = 15 # Number to multiply base ack timeout by after each retry attempt. (integer # value) #rpc_ack_timeout_multiplier = 2 # Default number of message sending attempts in case of any problems occurred: # positive value N means at most N retries, 0 means no retries, None or -1 (or # any other negative values) mean to retry forever. This option is used only if # acknowledgments are enabled. (integer value) #rpc_retry_attempts = 3 # List of publisher hosts SubConsumer can subscribe on. This option has higher # priority then the default publishers list taken from the matchmaker. (list # value) #subscribe_on = [oslo_middleware] # # From oslo.middleware # # The maximum body size for each request, in bytes. (integer value) # Deprecated group/name - [DEFAULT]/osapi_max_request_body_size # Deprecated group/name - [DEFAULT]/max_request_body_size #max_request_body_size = 114688 # DEPRECATED: The HTTP Header that will be used to determine what the original # request protocol scheme was, even if it was hidden by a SSL termination # proxy. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. #secure_proxy_ssl_header = X-Forwarded-Proto # Whether the application is behind a proxy or not. This determines if the # middleware should parse the headers or not. (boolean value) #enable_proxy_headers_parsing = false [oslo_policy] # # From oslo.policy # # This option controls whether or not to enforce scope when evaluating # policies. If ``True``, the scope of the token used in the request is compared # to the ``scope_types`` of the policy being enforced. If the scopes do not # match, an ``InvalidScope`` exception will be raised. If ``False``, a message # will be logged informing operators that policies are being invoked with # mismatching scope. (boolean value) #enforce_scope = false # The file that defines policies. (string value) #policy_file = policy.json # Default rule. Enforced when a requested rule is not found. (string value) #policy_default_rule = default # Directories where policy configuration files are stored. They can be relative # to any directory in the search path defined by the config_dir option, or # absolute paths. The file defined by policy_file must exist for these # directories to be searched. Missing or empty directories are ignored. (multi # valued) #policy_dirs = policy.d # Content Type to send and receive data for REST based policy check (string # value) # Possible values: # application/x-www-form-urlencoded - # application/json - #remote_content_type = application/x-www-form-urlencoded # server identity verification for REST based policy check (boolean value) #remote_ssl_verify_server_crt = false # Absolute path to ca cert file for REST based policy check (string value) #remote_ssl_ca_crt_file = # Absolute path to client cert for REST based policy check (string value) #remote_ssl_client_crt_file = # Absolute path client key file REST based policy check (string value) #remote_ssl_client_key_file = [paste_deploy] # # From heat.common.config # # The flavor to use. (string value) #flavor = # The API paste config file to use. (string value) #api_paste_config = api-paste.ini [profiler] # # From heat.common.config # # # Enables the profiling for all services on this node. Default value is False # (fully disable the profiling feature). # # Possible values: # # * True: Enables the feature # * False: Disables the feature. The profiling cannot be started via this # project # operations. If the profiling is triggered by another project, this project # part # will be empty. # (boolean value) # Deprecated group/name - [profiler]/profiler_enabled #enabled = false # # Enables SQL requests profiling in services. Default value is False (SQL # requests won't be traced). # # Possible values: # # * True: Enables SQL requests profiling. Each SQL query will be part of the # trace and can the be analyzed by how much time was spent for that. # * False: Disables SQL requests profiling. The spent time is only shown on a # higher level of operations. Single SQL queries cannot be analyzed this # way. # (boolean value) #trace_sqlalchemy = false # # Secret key(s) to use for encrypting context data for performance profiling. # This string value should have the following format: # [,,...], # where each key is some random string. A user who triggers the profiling via # the REST API has to set one of these keys in the headers of the REST API call # to include profiling results of this node for this particular project. # # Both "enabled" flag and "hmac_keys" config options should be set to enable # profiling. Also, to generate correct profiling information across all # services # at least one key needs to be consistent between OpenStack projects. This # ensures it can be used from client side to generate the trace, containing # information from all possible resources. (string value) #hmac_keys = SECRET_KEY # # Connection string for a notifier backend. Default value is messaging:// which # sets the notifier to oslo_messaging. # # Examples of possible values: # # * messaging://: use oslo_messaging driver for sending notifications. # * mongodb://127.0.0.1:27017 : use mongodb driver for sending notifications. # * elasticsearch://127.0.0.1:9200 : use elasticsearch driver for sending # notifications. # (string value) #connection_string = messaging:// # # Document type for notification indexing in elasticsearch. # (string value) #es_doc_type = notification # # This parameter is a time value parameter (for example: es_scroll_time=2m), # indicating for how long the nodes that participate in the search will # maintain # relevant resources in order to continue and support it. # (string value) #es_scroll_time = 2m # # Elasticsearch splits large requests in batches. This parameter defines # maximum size of each batch (for example: es_scroll_size=10000). # (integer value) #es_scroll_size = 10000 # # Redissentinel provides a timeout option on the connections. # This parameter defines that timeout (for example: socket_timeout=0.1). # (floating point value) #socket_timeout = 0.1 # # Redissentinel uses a service name to identify a master redis service. # This parameter defines the name (for example: # sentinal_service_name=mymaster). # (string value) #sentinel_service_name = mymaster [revision] # # From heat.common.config # # Heat build revision. If you would prefer to manage your build revision # separately, you can move this section to a different file and add it as # another config option. (string value) #heat_revision = unknown [ssl] # # From oslo.service.sslutils # # CA certificate file to use to verify connecting clients. (string value) # Deprecated group/name - [DEFAULT]/ssl_ca_file #ca_file = # Certificate file to use when starting the server securely. (string value) # Deprecated group/name - [DEFAULT]/ssl_cert_file #cert_file = # Private key file to use when starting the server securely. (string value) # Deprecated group/name - [DEFAULT]/ssl_key_file #key_file = # SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and # SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some # distributions. (string value) #version = # Sets the list of available ciphers. value should be a string in the OpenSSL # cipher list format. (string value) #ciphers = [trustee] # # From heat.common.context # # Authentication type to load (string value) # Deprecated group/name - [trustee]/auth_plugin #auth_type = # Config Section from which to load plugin specific options (string value) #auth_section = # Authentication URL (string value) #auth_url = # Scope for system operations (string value) #system_scope = # Domain ID to scope to (string value) #domain_id = # Domain name to scope to (string value) #domain_name = # Project ID to scope to (string value) # Deprecated group/name - [trustee]/tenant_id #project_id = # Project name to scope to (string value) # Deprecated group/name - [trustee]/tenant_name #project_name = # Domain ID containing project (string value) #project_domain_id = # Domain name containing project (string value) #project_domain_name = # Trust ID (string value) #trust_id = # Optional domain ID to use with v3 and v2 parameters. It will be used for both # the user and project domain in v3 and ignored in v2 authentication. (string # value) #default_domain_id = # Optional domain name to use with v3 API and v2 parameters. It will be used # for both the user and project domain in v3 and ignored in v2 authentication. # (string value) #default_domain_name = # User id (string value) #user_id = # Username (string value) # Deprecated group/name - [trustee]/user_name #username = # User's domain id (string value) #user_domain_id = # User's domain name (string value) #user_domain_name = # User's password (string value) #password = [volumes] # # From heat.common.config # # Indicate if cinder-backup service is enabled. This is a temporary workaround # until cinder-backup service becomes discoverable, see LP#1334856. (boolean # value) #backups_enabled = true