[DEFAULT] # # From cinder # # The maximum number of items that a collection resource returns in a single # response (integer value) #osapi_max_limit = 1000 # Base URL that will be presented to users in links to the OpenStack Volume API # (string value) # Deprecated group/name - [DEFAULT]/osapi_compute_link_prefix #osapi_volume_base_URL = # Volume filter options which non-admin user could use to query volumes. # Default values are: ['name', 'status', 'metadata', 'availability_zone' # ,'bootable', 'group_id'] (list value) #query_volume_filters = name,status,metadata,availability_zone,bootable,group_id # Treat X-Forwarded-For as the canonical remote address. Only enable this if # you have a sanitizing proxy. (boolean value) #use_forwarded_for = false # Public url to use for versions endpoint. The default is None, which will use # the request's host_url attribute to populate the URL base. If Cinder is # operating behind a proxy, you will want to change this to represent the # proxy's URL. (string value) #public_endpoint = # Backup services use same backend. (boolean value) #backup_use_same_host = false # Compression algorithm (None to disable) (string value) #backup_compression_algorithm = zlib # Backup metadata version to be used when backing up volume metadata. If this # number is bumped, make sure the service doing the restore supports the new # version. (integer value) #backup_metadata_version = 2 # The number of chunks or objects, for which one Ceilometer notification will # be sent (integer value) #backup_object_number_per_notification = 10 # Interval, in seconds, between two progress notifications reporting the backup # status (integer value) #backup_timer_interval = 120 # Ceph configuration file to use. (string value) #backup_ceph_conf = /etc/ceph/ceph.conf # The Ceph user to connect with. Default here is to use the same user as for # Cinder volumes. If not using cephx this should be set to None. (string value) #backup_ceph_user = cinder # The chunk size, in bytes, that a backup is broken into before transfer to the # Ceph object store. (integer value) #backup_ceph_chunk_size = 134217728 # The Ceph pool where volume backups are stored. (string value) #backup_ceph_pool = backups # RBD stripe unit to use when creating a backup image. (integer value) #backup_ceph_stripe_unit = 0 # RBD stripe count to use when creating a backup image. (integer value) #backup_ceph_stripe_count = 0 # If True, always discard excess bytes when restoring volumes i.e. pad with # zeroes. (boolean value) #restore_discard_excess_bytes = true # Base dir containing mount point for gluster share. (string value) #glusterfs_backup_mount_point = $state_path/backup_mount # GlusterFS share in : format. # Eg: 1.2.3.4:backup_vol (string value) #glusterfs_backup_share = # The GCS bucket to use. (string value) #backup_gcs_bucket = # The size in bytes of GCS backup objects. (integer value) #backup_gcs_object_size = 52428800 # The size in bytes that changes are tracked for incremental backups. # backup_gcs_object_size has to be multiple of backup_gcs_block_size. (integer # value) #backup_gcs_block_size = 32768 # GCS object will be downloaded in chunks of bytes. (integer value) #backup_gcs_reader_chunk_size = 2097152 # GCS object will be uploaded in chunks of bytes. Pass in a value of -1 if the # file is to be uploaded as a single chunk. (integer value) #backup_gcs_writer_chunk_size = 2097152 # Number of times to retry. (integer value) #backup_gcs_num_retries = 3 # List of GCS error codes. (list value) #backup_gcs_retry_error_codes = 429 # Location of GCS bucket. (string value) #backup_gcs_bucket_location = US # Storage class of GCS bucket. (string value) #backup_gcs_storage_class = NEARLINE # Absolute path of GCS service account credential file. (string value) #backup_gcs_credential_file = # Owner project id for GCS bucket. (string value) #backup_gcs_project_id = # Http user-agent string for gcs api. (string value) #backup_gcs_user_agent = gcscinder # Enable or Disable the timer to send the periodic progress notifications to # Ceilometer when backing up the volume to the GCS backend storage. The default # value is True to enable the timer. (boolean value) #backup_gcs_enable_progress_timer = true # URL for http proxy access. (uri value) #backup_gcs_proxy_url = # Base dir containing mount point for NFS share. (string value) #backup_mount_point_base = $state_path/backup_mount # NFS share in hostname:path, ipv4addr:path, or "[ipv6addr]:path" format. # (string value) #backup_share = # Mount options passed to the NFS client. See NFS man page for details. (string # value) #backup_mount_options = # The maximum size in bytes of the files used to hold backups. If the volume # being backed up exceeds this size, then it will be backed up into multiple # files.backup_file_size must be a multiple of backup_sha_block_size_bytes. # (integer value) #backup_file_size = 1999994880 # The size in bytes that changes are tracked for incremental backups. # backup_file_size has to be multiple of backup_sha_block_size_bytes. (integer # value) #backup_sha_block_size_bytes = 32768 # Enable or Disable the timer to send the periodic progress notifications to # Ceilometer when backing up the volume to the backend storage. The default # value is True to enable the timer. (boolean value) #backup_enable_progress_timer = true # Path specifying where to store backups. (string value) #backup_posix_path = $state_path/backup # Custom directory to use for backups. (string value) #backup_container = # The URL of the Swift endpoint (uri value) #backup_swift_url = # The URL of the Keystone endpoint (uri value) #backup_swift_auth_url = # Info to match when looking for swift in the service catalog. Format is: # separated values of the form: :: - # Only used if backup_swift_url is unset (string value) #swift_catalog_info = object-store:swift:publicURL # Info to match when looking for keystone in the service catalog. Format is: # separated values of the form: :: - # Only used if backup_swift_auth_url is unset (string value) #keystone_catalog_info = identity:Identity Service:publicURL # Swift authentication mechanism (string value) #backup_swift_auth = per_user # Swift authentication version. Specify "1" for auth 1.0, or "2" for auth 2.0 # or "3" for auth 3.0 (string value) #backup_swift_auth_version = 1 # Swift tenant/account name. Required when connecting to an auth 2.0 system # (string value) #backup_swift_tenant = # Swift user domain name. Required when connecting to an auth 3.0 system # (string value) #backup_swift_user_domain = # Swift project domain name. Required when connecting to an auth 3.0 system # (string value) #backup_swift_project_domain = # Swift project/account name. Required when connecting to an auth 3.0 system # (string value) #backup_swift_project = # Swift user name (string value) #backup_swift_user = # Swift key for authentication (string value) #backup_swift_key = # The default Swift container to use (string value) #backup_swift_container = volumebackups # The size in bytes of Swift backup objects (integer value) #backup_swift_object_size = 52428800 # The size in bytes that changes are tracked for incremental backups. # backup_swift_object_size has to be multiple of backup_swift_block_size. # (integer value) #backup_swift_block_size = 32768 # The number of retries to make for Swift operations (integer value) #backup_swift_retry_attempts = 3 # The backoff time in seconds between Swift retries (integer value) #backup_swift_retry_backoff = 2 # Enable or Disable the timer to send the periodic progress notifications to # Ceilometer when backing up the volume to the Swift backend storage. The # default value is True to enable the timer. (boolean value) #backup_swift_enable_progress_timer = true # Location of the CA certificate file to use for swift client requests. (string # value) #backup_swift_ca_cert_file = # Bypass verification of server certificate when making SSL connection to # Swift. (boolean value) #backup_swift_auth_insecure = false # Volume prefix for the backup id when backing up to TSM (string value) #backup_tsm_volume_prefix = backup # TSM password for the running username (string value) #backup_tsm_password = password # Enable or Disable compression for backups (boolean value) #backup_tsm_compression = true # Driver to use for backups. (string value) #backup_driver = cinder.backup.drivers.swift # Offload pending backup delete during backup service startup. If false, the # backup service will remain down until all pending backups are deleted. # (boolean value) #backup_service_inithost_offload = true # Name of this cluster. Used to group volume hosts that share the same backend # configurations to work in HA Active-Active mode. Active-Active is not yet # supported. (string value) #cluster = # Top-level directory for maintaining cinder's state (string value) # Deprecated group/name - [DEFAULT]/pybasedir #state_path = /var/lib/cinder # IP address of this host (string value) #my_ip = 10.0.2.178 # A list of the URLs of glance API servers available to cinder # ([http[s]://][hostname|ip]:port). If protocol is not specified it defaults to # http. (list value) #glance_api_servers = # Version of the glance API to use (integer value) #glance_api_version = 1 # Number retries when downloading an image from glance (integer value) # Minimum value: 0 #glance_num_retries = 0 # Allow to perform insecure SSL (https) requests to glance (https will be used # but cert validation will not be performed). (boolean value) #glance_api_insecure = false # Enables or disables negotiation of SSL layer compression. In some cases # disabling compression can improve data throughput, such as when high network # bandwidth is available and you use compressed image formats like qcow2. # (boolean value) #glance_api_ssl_compression = false # Location of ca certificates file to use for glance client requests. (string # value) #glance_ca_certificates_file = # http/https timeout value for glance operations. If no value (None) is # supplied here, the glanceclient default value is used. (integer value) #glance_request_timeout = # DEPRECATED: Deploy v1 of the Cinder API. (boolean value) # This option is deprecated for removal. # Its value may be silently ignored in the future. #enable_v1_api = false # DEPRECATED: Deploy v2 of the Cinder API. (boolean value) # This option is deprecated for removal. # Its value may be silently ignored in the future. #enable_v2_api = true # Deploy v3 of the Cinder API. (boolean value) #enable_v3_api = true # Enables or disables rate limit of the API. (boolean value) #api_rate_limit = true # Specify list of extensions to load when using osapi_volume_extension option # with cinder.api.contrib.select_extensions (list value) #osapi_volume_ext_list = # osapi volume extension to load (multi valued) #osapi_volume_extension = cinder.api.contrib.standard_extensions # Full class name for the Manager for volume (string value) #volume_manager = cinder.volume.manager.VolumeManager # Full class name for the Manager for volume backup (string value) #backup_manager = cinder.backup.manager.BackupManager # Full class name for the Manager for scheduler (string value) #scheduler_manager = cinder.scheduler.manager.SchedulerManager # Name of this node. This can be an opaque identifier. It is not necessarily a # host name, FQDN, or IP address. (string value) #host = slaanesh # Availability zone of this node (string value) #storage_availability_zone = nova # Default availability zone for new volumes. If not set, the # storage_availability_zone option value is used as the default for new # volumes. (string value) #default_availability_zone = # If the requested Cinder availability zone is unavailable, fall back to the # value of default_availability_zone, then storage_availability_zone, instead # of failing. (boolean value) #allow_availability_zone_fallback = false # Default volume type to use (string value) #default_volume_type = # Default group type to use (string value) #default_group_type = # Time period for which to generate volume usages. The options are hour, day, # month, or year. (string value) #volume_usage_audit_period = month # Path to the rootwrap configuration file to use for running commands as root # (string value) #rootwrap_config = /etc/cinder/rootwrap.conf # Enable monkey patching (boolean value) #monkey_patch = false # List of modules/decorators to monkey patch (list value) #monkey_patch_modules = # Maximum time since last check-in for a service to be considered up (integer # value) #service_down_time = 60 # The full class name of the volume API class to use (string value) #volume_api_class = cinder.volume.api.API # The full class name of the volume backup API class (string value) #backup_api_class = cinder.backup.api.API # The strategy to use for auth. Supports noauth or keystone. (string value) # Allowed values: noauth, keystone #auth_strategy = keystone # A list of backend names to use. These backend names should be backed by a # unique [CONFIG] group with its options (list value) #enabled_backends = # Whether snapshots count against gigabyte quota (boolean value) #no_snapshot_gb_quota = false # The full class name of the volume transfer API class (string value) #transfer_api_class = cinder.transfer.api.API # The full class name of the consistencygroup API class (string value) #consistencygroup_api_class = cinder.consistencygroup.api.API # The full class name of the group API class (string value) #group_api_class = cinder.group.api.API # OpenStack privileged account username. Used for requests to other services # (such as Nova) that require an account with special rights. (string value) #os_privileged_user_name = # Password associated with the OpenStack privileged account. (string value) #os_privileged_user_password = # Tenant name associated with the OpenStack privileged account. (string value) #os_privileged_user_tenant = # Auth URL associated with the OpenStack privileged account. (uri value) #os_privileged_user_auth_url = # The full class name of the compute API class to use (string value) #compute_api_class = cinder.compute.nova.API # Match this value when searching for nova in the service catalog. Format is: # separated values of the form: :: # (string value) #nova_catalog_info = compute:Compute Service:publicURL # Same as nova_catalog_info, but for admin endpoint. (string value) #nova_catalog_admin_info = compute:Compute Service:adminURL # Override service catalog lookup with template for nova endpoint e.g. # http://localhost:8774/v2/%(project_id)s (string value) #nova_endpoint_template = # Same as nova_endpoint_template, but for admin endpoint. (string value) #nova_endpoint_admin_template = # Region name of this node (string value) #os_region_name = # Location of ca certificates file to use for nova client requests. (string # value) #nova_ca_certificates_file = # Allow to perform insecure SSL requests to nova (boolean value) #nova_api_insecure = false # ID of the project which will be used as the Cinder internal tenant. (string # value) #cinder_internal_tenant_project_id = # ID of the user to be used in volume operations as the Cinder internal tenant. # (string value) #cinder_internal_tenant_user_id = # Services to be added to the available pool on create (boolean value) #enable_new_services = true # Template string to be used to generate volume names (string value) #volume_name_template = volume-%s # Template string to be used to generate snapshot names (string value) #snapshot_name_template = snapshot-%s # Template string to be used to generate backup names (string value) #backup_name_template = backup-%s # Driver to use for database access (string value) #db_driver = cinder.db # Make exception message format errors fatal. (boolean value) #fatal_exception_format_errors = false # A list of url schemes that can be downloaded directly via the direct_url. # Currently supported schemes: [file, cinder]. (list value) #allowed_direct_url_schemes = # Info to match when looking for glance in the service catalog. Format is: # separated values of the form: :: - # Only used if glance_api_servers are not provided. (string value) #glance_catalog_info = image:glance:publicURL # Default core properties of image (list value) #glance_core_properties = checksum,container_format,disk_format,image_name,image_id,min_disk,min_ram,name,size # Directory used for temporary storage during image conversion (string value) #image_conversion_dir = $state_path/conversion # message minimum life in seconds. (integer value) #message_ttl = 2592000 # Number of volumes allowed per project (integer value) #quota_volumes = 10 # Number of volume snapshots allowed per project (integer value) #quota_snapshots = 10 # Number of consistencygroups allowed per project (integer value) #quota_consistencygroups = 10 # Number of groups allowed per project (integer value) #quota_groups = 10 # Total amount of storage, in gigabytes, allowed for volumes and snapshots per # project (integer value) #quota_gigabytes = 1000 # Number of volume backups allowed per project (integer value) #quota_backups = 10 # Total amount of storage, in gigabytes, allowed for backups per project # (integer value) #quota_backup_gigabytes = 1000 # Number of seconds until a reservation expires (integer value) #reservation_expire = 86400 # Count of reservations until usage is refreshed (integer value) #until_refresh = 0 # Number of seconds between subsequent usage refreshes (integer value) #max_age = 0 # Default driver to use for quota checks (string value) #quota_driver = cinder.quota.DbQuotaDriver # Enables or disables use of default quota class with default quota. (boolean # value) #use_default_quota_class = true # Max size allowed per volume, in gigabytes (integer value) #per_volume_size_limit = -1 # The scheduler host manager class to use (string value) #scheduler_host_manager = cinder.scheduler.host_manager.HostManager # Maximum number of attempts to schedule a volume (integer value) #scheduler_max_attempts = 3 # Which filter class names to use for filtering hosts when not specified in the # request. (list value) #scheduler_default_filters = AvailabilityZoneFilter,CapacityFilter,CapabilitiesFilter # Which weigher class names to use for weighing hosts. (list value) #scheduler_default_weighers = CapacityWeigher # Which handler to use for selecting the host/pool after weighing (string # value) #scheduler_weight_handler = cinder.scheduler.weights.OrderedHostWeightHandler # Default scheduler driver to use (string value) #scheduler_driver = cinder.scheduler.filter_scheduler.FilterScheduler # Absolute path to scheduler configuration JSON file. (string value) #scheduler_json_config_location = # Multiplier used for weighing free capacity. Negative numbers mean to stack vs # spread. (floating point value) #capacity_weight_multiplier = 1.0 # Multiplier used for weighing allocated capacity. Positive numbers mean to # stack vs spread. (floating point value) #allocated_capacity_weight_multiplier = -1.0 # Multiplier used for weighing volume number. Negative numbers mean to spread # vs stack. (floating point value) #volume_number_multiplier = -1.0 # Interval, in seconds, between nodes reporting state to datastore (integer # value) #report_interval = 10 # Interval, in seconds, between running periodic tasks (integer value) #periodic_interval = 60 # Range, in seconds, to randomly delay when starting the periodic task # scheduler to reduce stampeding. (Disable by setting to 0) (integer value) #periodic_fuzzy_delay = 60 # IP address on which OpenStack Volume API listens (string value) #osapi_volume_listen = 0.0.0.0 # Port on which OpenStack Volume API listens (port value) # Minimum value: 0 # Maximum value: 65535 #osapi_volume_listen_port = 8776 # Number of workers for OpenStack Volume API service. The default is equal to # the number of CPUs available. (integer value) #osapi_volume_workers = # Wraps the socket in a SSL context if True is set. A certificate file and key # file must be specified. (boolean value) #osapi_volume_use_ssl = false # Option to enable strict host key checking. When set to "True" Cinder will # only connect to systems with a host key present in the configured # "ssh_hosts_key_file". When set to "False" the host key will be saved upon # first connection and used for subsequent connections. Default=False (boolean # value) #strict_ssh_host_key_policy = false # File containing SSH host keys for the systems with which Cinder needs to # communicate. OPTIONAL: Default=$state_path/ssh_known_hosts (string value) #ssh_hosts_key_file = $state_path/ssh_known_hosts # The number of characters in the salt. (integer value) #volume_transfer_salt_length = 8 # The number of characters in the autogenerated auth key. (integer value) #volume_transfer_key_length = 16 # Enables the Force option on upload_to_image. This enables running # upload_volume on in-use volumes for backends that support it. (boolean value) #enable_force_upload = false # Create volume from snapshot at the host where snapshot resides (boolean # value) #snapshot_same_host = true # Ensure that the new volumes are the same AZ as snapshot or source volume # (boolean value) #cloned_volume_same_az = true # Cache volume availability zones in memory for the provided duration in # seconds (integer value) #az_cache_duration = 3600 # Number of times to attempt to run flakey shell commands (integer value) #num_shell_tries = 3 # The percentage of backend capacity is reserved (integer value) # Minimum value: 0 # Maximum value: 100 #reserved_percentage = 0 # Prefix for iSCSI volumes (string value) #iscsi_target_prefix = iqn.2010-10.org.openstack: # The IP address that the iSCSI daemon is listening on (string value) #iscsi_ip_address = $my_ip # The list of secondary IP addresses of the iSCSI daemon (list value) #iscsi_secondary_ip_addresses = # The port that the iSCSI daemon is listening on (port value) # Minimum value: 0 # Maximum value: 65535 #iscsi_port = 3260 # The maximum number of times to rescan targets to find volume (integer value) #num_volume_device_scan_tries = 3 # The backend name for a given driver implementation (string value) #volume_backend_name = # Do we attach/detach volumes in cinder using multipath for volume to image and # image to volume transfers? (boolean value) #use_multipath_for_image_xfer = false # If this is set to True, attachment of volumes for image transfer will be # aborted when multipathd is not running. Otherwise, it will fallback to single # path. (boolean value) #enforce_multipath_for_image_xfer = false # Method used to wipe old volumes (string value) # Allowed values: none, zero #volume_clear = zero # Size in MiB to wipe at start of old volumes. 1024 MiBat max. 0 => all # (integer value) # Maximum value: 1024 #volume_clear_size = 0 # The flag to pass to ionice to alter the i/o priority of the process used to # zero a volume after deletion, for example "-c3" for idle only priority. # (string value) #volume_clear_ionice = # iSCSI target user-land tool to use. tgtadm is default, use lioadm for LIO # iSCSI support, scstadmin for SCST target support, ietadm for iSCSI Enterprise # Target, iscsictl for Chelsio iSCSI Target or fake for testing. (string value) # Allowed values: tgtadm, lioadm, scstadmin, iscsictl, ietadm, fake #iscsi_helper = tgtadm # Volume configuration file storage directory (string value) #volumes_dir = $state_path/volumes # IET configuration file (string value) #iet_conf = /etc/iet/ietd.conf # Chiscsi (CXT) global defaults configuration file (string value) #chiscsi_conf = /etc/chelsio-iscsi/chiscsi.conf # Sets the behavior of the iSCSI target to either perform blockio or fileio # optionally, auto can be set and Cinder will autodetect type of backing device # (string value) # Allowed values: blockio, fileio, auto #iscsi_iotype = fileio # The default block size used when copying/clearing volumes (string value) #volume_dd_blocksize = 1M # The blkio cgroup name to be used to limit bandwidth of volume copy (string # value) #volume_copy_blkio_cgroup_name = cinder-volume-copy # The upper limit of bandwidth of volume copy. 0 => unlimited (integer value) #volume_copy_bps_limit = 0 # Sets the behavior of the iSCSI target to either perform write-back(on) or # write-through(off). This parameter is valid if iscsi_helper is set to tgtadm. # (string value) # Allowed values: on, off #iscsi_write_cache = on # Sets the target-specific flags for the iSCSI target. Only used for tgtadm to # specify backing device flags using bsoflags option. The specified string is # passed as is to the underlying tool. (string value) #iscsi_target_flags = # Determines the iSCSI protocol for new iSCSI volumes, created with tgtadm or # lioadm target helpers. In order to enable RDMA, this parameter should be set # with the value "iser". The supported iSCSI protocol values are "iscsi" and # "iser". (string value) # Allowed values: iscsi, iser #iscsi_protocol = iscsi # The path to the client certificate key for verification, if the driver # supports it. (string value) #driver_client_cert_key = # The path to the client certificate for verification, if the driver supports # it. (string value) #driver_client_cert = # Tell driver to use SSL for connection to backend storage if the driver # supports it. (boolean value) #driver_use_ssl = false # Float representation of the over subscription ratio when thin provisioning is # involved. Default ratio is 20.0, meaning provisioned capacity can be 20 times # of the total physical capacity. If the ratio is 10.5, it means provisioned # capacity can be 10.5 times of the total physical capacity. A ratio of 1.0 # means provisioned capacity cannot exceed the total physical capacity. The # ratio has to be a minimum of 1.0. (floating point value) #max_over_subscription_ratio = 20.0 # Certain ISCSI targets have predefined target names, SCST target driver uses # this name. (string value) #scst_target_iqn_name = # SCST target implementation can choose from multiple SCST target drivers. # (string value) #scst_target_driver = iscsi # Option to enable/disable CHAP authentication for targets. (boolean value) #use_chap_auth = false # CHAP user name. (string value) #chap_username = # Password for specified CHAP account name. (string value) #chap_password = # Namespace for driver private data values to be saved in. (string value) #driver_data_namespace = # String representation for an equation that will be used to filter hosts. Only # used when the driver filter is set to be used by the Cinder scheduler. # (string value) #filter_function = # String representation for an equation that will be used to determine the # goodness of a host. Only used when using the goodness weigher is set to be # used by the Cinder scheduler. (string value) #goodness_function = # If set to True the http client will validate the SSL certificate of the # backend endpoint. (boolean value) #driver_ssl_cert_verify = false # Can be used to specify a non default path to a CA_BUNDLE file or directory # with certificates of trusted CAs, which will be used to validate the backend # (string value) #driver_ssl_cert_path = # List of options that control which trace info is written to the DEBUG log # level to assist developers. Valid values are method and api. (list value) #trace_flags = # Multi opt of dictionaries to represent a replication target device. This # option may be specified multiple times in a single config section to specify # multiple replication target devices. Each entry takes the standard dict # config form: replication_device = # target_device_id:,key1:value1,key2:value2... (dict value) #replication_device = # If set to True, upload-to-image in raw format will create a cloned volume and # register its location to the image service, instead of uploading the volume # content. The cinder backend and locations support must be enabled in the # image service, and glance_api_version must be set to 2. (boolean value) #image_upload_use_cinder_backend = false # If set to True, the image volume created by upload-to-image will be placed in # the internal tenant. Otherwise, the image volume is created in the current # context's tenant. (boolean value) #image_upload_use_internal_tenant = false # Enable the image volume cache for this backend. (boolean value) #image_volume_cache_enabled = false # Max size of the image volume cache for this backend in GB. 0 => unlimited. # (integer value) #image_volume_cache_max_size_gb = 0 # Max number of entries allowed in the image volume cache. 0 => unlimited. # (integer value) #image_volume_cache_max_count = 0 # Report to clients of Cinder that the backend supports discard (aka. # trim/unmap). This will not actually change the behavior of the backend or the # client directly, it will only notify that it can be used. (boolean value) #report_discard_supported = false # Protocol for transferring data between host and storage back-end. (string # value) # Allowed values: iscsi, fc #storage_protocol = iscsi # If this is set to True, the backup_use_temp_snapshot path will be used during # the backup. Otherwise, it will use backup_use_temp_volume path. (boolean # value) #backup_use_temp_snapshot = false # Set this to True when you want to allow an unsupported driver to start. # Drivers that haven't maintained a working CI system and testing are marked as # unsupported until CI is working again. This also marks a driver as # deprecated and may be removed in the next release. (boolean value) #enable_unsupported_driver = false # The maximum number of times to rescan iSER targetto find volume (integer # value) #num_iser_scan_tries = 3 # Prefix for iSER volumes (string value) #iser_target_prefix = iqn.2010-10.org.openstack: # The IP address that the iSER daemon is listening on (string value) #iser_ip_address = $my_ip # The port that the iSER daemon is listening on (port value) # Minimum value: 0 # Maximum value: 65535 #iser_port = 3260 # The name of the iSER target user-land tool to use (string value) #iser_helper = tgtadm # List of all available devices (list value) #available_devices = # IP address/hostname of Blockbridge API. (string value) #blockbridge_api_host = # Override HTTPS port to connect to Blockbridge API server. (integer value) #blockbridge_api_port = # Blockbridge API authentication scheme (token or password) (string value) # Allowed values: token, password #blockbridge_auth_scheme = token # Blockbridge API token (for auth scheme 'token') (string value) #blockbridge_auth_token = # Blockbridge API user (for auth scheme 'password') (string value) #blockbridge_auth_user = # Blockbridge API password (for auth scheme 'password') (string value) #blockbridge_auth_password = # Defines the set of exposed pools and their associated backend query strings # (dict value) #blockbridge_pools = OpenStack:+openstack # Default pool name if unspecified. (string value) #blockbridge_default_pool = # These values will be used for CloudByte storage's addQos API call. (dict # value) #cb_add_qosgroup = graceallowed:false,iops:10,iopscontrol:true,latency:15,memlimit:0,networkspeed:0,throughput:0,tpcontrol:false # These values will be used for CloudByte storage's createVolume API call. # (dict value) #cb_create_volume = blocklength:512B,compression:off,deduplication:off,protocoltype:ISCSI,recordsize:16k,sync:always # Driver will use this API key to authenticate against the CloudByte storage's # management interface. (string value) #cb_apikey = # CloudByte storage specific account name. This maps to a project name in # OpenStack. (string value) #cb_account_name = # This corresponds to the name of Tenant Storage Machine (TSM) in CloudByte # storage. A volume will be created in this TSM. (string value) #cb_tsm_name = # A retry value in seconds. Will be used by the driver to check if volume # creation was successful in CloudByte storage. (integer value) #cb_confirm_volume_create_retry_interval = 5 # Will confirm a successful volume creation in CloudByte storage by making this # many number of attempts. (integer value) #cb_confirm_volume_create_retries = 3 # A retry value in seconds. Will be used by the driver to check if volume # deletion was successful in CloudByte storage. (integer value) #cb_confirm_volume_delete_retry_interval = 5 # Will confirm a successful volume deletion in CloudByte storage by making this # many number of attempts. (integer value) #cb_confirm_volume_delete_retries = 3 # This corresponds to the discovery authentication group in CloudByte storage. # Chap users are added to this group. Driver uses the first user found for this # group. Default value is None. (string value) #cb_auth_group = # These values will be used for CloudByte storage's updateQosGroup API call. # (list value) #cb_update_qos_group = iops,latency,graceallowed # These values will be used for CloudByte storage's updateFileSystem API call. # (list value) #cb_update_file_system = compression,sync,noofcopies,readonly # RPC port to connect to Coho Data MicroArray (integer value) #coho_rpc_port = 2049 # Hostname for the CoprHD Instance (string value) #coprhd_hostname = # Port for the CoprHD Instance (port value) # Minimum value: 0 # Maximum value: 65535 #coprhd_port = 4443 # Username for accessing the CoprHD Instance (string value) #coprhd_username = # Password for accessing the CoprHD Instance (string value) #coprhd_password = # Tenant to utilize within the CoprHD Instance (string value) #coprhd_tenant = # Project to utilize within the CoprHD Instance (string value) #coprhd_project = # Virtual Array to utilize within the CoprHD Instance (string value) #coprhd_varray = # True | False to indicate if the storage array in CoprHD is VMAX or VPLEX # (boolean value) #coprhd_emulate_snapshot = false # Rest Gateway IP or FQDN for Scaleio (string value) #coprhd_scaleio_rest_gateway_host = None # Rest Gateway Port for Scaleio (port value) # Minimum value: 0 # Maximum value: 65535 #coprhd_scaleio_rest_gateway_port = 4984 # Username for Rest Gateway (string value) #coprhd_scaleio_rest_server_username = # Rest Gateway Password (string value) #coprhd_scaleio_rest_server_password = # verify server certificate (boolean value) #scaleio_verify_server_certificate = false # Server certificate path (string value) #scaleio_server_certificate_path = # Datera API port. (string value) #datera_api_port = 7717 # DEPRECATED: Datera API version. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. #datera_api_version = 2 # Timeout for HTTP 503 retry messages (integer value) #datera_503_timeout = 120 # Interval between 503 retries (integer value) #datera_503_interval = 5 # True to set function arg and return logging (boolean value) #datera_debug = false # ONLY FOR DEBUG/TESTING PURPOSES # True to set replica_count to 1 (boolean value) #datera_debug_replica_count_override = false # If set to 'Map' --> OpenStack project ID will be mapped implicitly to Datera # tenant ID # If set to 'None' --> Datera tenant ID will not be used during volume # provisioning # If set to anything else --> Datera tenant ID will be the provided value # (string value) #datera_tenant_id = # Storage Center System Serial Number (integer value) #dell_sc_ssn = 64702 # Dell API port (port value) # Minimum value: 0 # Maximum value: 65535 #dell_sc_api_port = 3033 # Name of the server folder to use on the Storage Center (string value) #dell_sc_server_folder = openstack # Name of the volume folder to use on the Storage Center (string value) #dell_sc_volume_folder = openstack # Enable HTTPS SC certificate verification (boolean value) #dell_sc_verify_cert = false # IP address of secondary DSM controller (string value) #secondary_san_ip = # Secondary DSM user name (string value) #secondary_san_login = Admin # Secondary DSM user password name (string value) #secondary_san_password = # Secondary Dell API port (port value) # Minimum value: 0 # Maximum value: 65535 #secondary_sc_api_port = 3033 # Domain IP to be excluded from iSCSI returns. (IP address value) #excluded_domain_ip = # Server OS type to use when creating a new server on the Storage Center. # (string value) #dell_server_os = Red Hat Linux 6.x # Group name to use for creating volumes. Defaults to "group-0". (string value) #eqlx_group_name = group-0 # Maximum retry count for reconnection. Default is 5. (integer value) # Minimum value: 0 #eqlx_cli_max_retries = 5 # Pool in which volumes will be created. Defaults to "default". (string value) #eqlx_pool = default # REST server port. (string value) #sio_rest_server_port = 443 # Verify server certificate. (boolean value) #sio_verify_server_certificate = false # Server certificate path. (string value) #sio_server_certificate_path = # Round up volume capacity. (boolean value) #sio_round_volume_capacity = true # Unmap volume before deletion. (boolean value) #sio_unmap_volume_before_deletion = false # Protection Domain ID. (string value) #sio_protection_domain_id = # Protection Domain name. (string value) #sio_protection_domain_name = # Storage Pools. (string value) #sio_storage_pools = # Storage Pool name. (string value) #sio_storage_pool_name = # Storage Pool ID. (string value) #sio_storage_pool_id = # max_over_subscription_ratio setting for the ScaleIO driver. This replaces the # general max_over_subscription_ratio which has no effect in this # driver.Maximum value allowed for ScaleIO is 10.0. (floating point value) #sio_max_over_subscription_ratio = 10.0 # A comma-separated list of storage pool names to be used. (list value) #unity_storage_pool_names = # A comma-separated list of iSCSI or FC ports to be used. Each port can be # Unix-style glob expressions. (list value) #unity_io_ports = # Use this file for cinder emc plugin config data (string value) #cinder_emc_config_file = /etc/cinder/cinder_emc_config.xml # Use this value to specify multi-pool support for VMAX3 (string value) #multi_pool_support = False # VNX authentication scope type. By default, the value is global. (string # value) #storage_vnx_authentication_type = global # Directory path that contains the VNX security file. Make sure the security # file is generated first. (string value) #storage_vnx_security_file_dir = # Naviseccli Path. (string value) #naviseccli_path = # Comma-separated list of storage pool names to be used. (list value) #storage_vnx_pool_names = # Default timeout for CLI operations in minutes. For example, LUN migration is # a typical long running operation, which depends on the LUN size and the load # of the array. An upper bound in the specific deployment can be set to avoid # unnecessary long wait. By default, it is 365 days long. (integer value) #default_timeout = 31536000 # Default max number of LUNs in a storage group. By default, the value is 255. # (integer value) #max_luns_per_storage_group = 255 # To destroy storage group when the last LUN is removed from it. By default, # the value is False. (boolean value) #destroy_empty_storage_group = false # Mapping between hostname and its iSCSI initiator IP addresses. (string value) #iscsi_initiators = # Comma separated iSCSI or FC ports to be used in Nova or Cinder. (list value) #io_port_list = # Automatically register initiators. By default, the value is False. (boolean # value) #initiator_auto_registration = false # Automatically deregister initiators after the related storage group is # destroyed. By default, the value is False. (boolean value) #initiator_auto_deregistration = false # Report free_capacity_gb as 0 when the limit to maximum number of pool LUNs is # reached. By default, the value is False. (boolean value) #check_max_pool_luns_threshold = false # Delete a LUN even if it is in Storage Groups. By default, the value is False. # (boolean value) #force_delete_lun_in_storagegroup = false # Force LUN creation even if the full threshold of pool is reached. By default, # the value is False. (boolean value) #ignore_pool_full_threshold = false # XMS cluster id in multi-cluster environment (string value) #xtremio_cluster_name = # Number of retries in case array is busy (integer value) #xtremio_array_busy_retry_count = 5 # Interval between retries in case array is busy (integer value) #xtremio_array_busy_retry_interval = 5 # Number of volumes created from each cached glance image (integer value) #xtremio_volumes_per_glance_cache = 100 # The IP of DMS client socket server (IP address value) #disco_client = 127.0.0.1 # The port to connect DMS client socket server (port value) # Minimum value: 0 # Maximum value: 65535 #disco_client_port = 9898 # DEPRECATED: Path to the wsdl file to communicate with DISCO request manager # (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. #disco_wsdl_path = /etc/cinder/DISCOService.wsdl # The IP address of the REST server (IP address value) #rest_ip = # Use soap client or rest client for communicating with DISCO. Possible values # are "soap" or "rest". (string value) #choice_client = # The port of DISCO source API (port value) # Minimum value: 0 # Maximum value: 65535 #disco_src_api_port = 8080 # Prefix before volume name to differentiate DISCO volume created through # openstack and the other ones (string value) #volume_name_prefix = openstack- # How long we check whether a snapshot is finished before we give up (integer # value) #snapshot_check_timeout = 3600 # How long we check whether a restore is finished before we give up (integer # value) #restore_check_timeout = 3600 # How long we check whether a clone is finished before we give up (integer # value) #clone_check_timeout = 3600 # How long we wait before retrying to get an item detail (integer value) #retry_interval = 1 # Pool or Vdisk name to use for volume creation. (string value) #dothill_backend_name = A # linear (for Vdisk) or virtual (for Pool). (string value) # Allowed values: linear, virtual #dothill_backend_type = virtual # DotHill API interface protocol. (string value) # Allowed values: http, https #dothill_api_protocol = https # Whether to verify DotHill array SSL certificate. (boolean value) #dothill_verify_certificate = false # DotHill array SSL certificate path. (string value) #dothill_verify_certificate_path = # List of comma-separated target iSCSI IP addresses. (list value) #dothill_iscsi_ips = # Number of nodes that should replicate the data. (integer value) #drbdmanage_redundancy = 1 # Resource deployment completion wait policy. (string value) #drbdmanage_resource_policy = {"ratio": "0.51", "timeout": "60"} # Disk options to set on new resources. See http://www.drbd.org/en/doc/users- # guide-90/re-drbdconf for all the details. (string value) #drbdmanage_disk_options = {"c-min-rate": "4M"} # Net options to set on new resources. See http://www.drbd.org/en/doc/users- # guide-90/re-drbdconf for all the details. (string value) #drbdmanage_net_options = {"connect-int": "4", "allow-two-primaries": "yes", "ko-count": "30", "max-buffers": "20000", "ping-timeout": "100"} # Resource options to set on new resources. See http://www.drbd.org/en/doc # /users-guide-90/re-drbdconf for all the details. (string value) #drbdmanage_resource_options = {"auto-promote-timeout": "300"} # Snapshot completion wait policy. (string value) #drbdmanage_snapshot_policy = {"count": "1", "timeout": "60"} # Volume resize completion wait policy. (string value) #drbdmanage_resize_policy = {"timeout": "60"} # Resource deployment completion wait plugin. (string value) #drbdmanage_resource_plugin = drbdmanage.plugins.plugins.wait_for.WaitForResource # Snapshot completion wait plugin. (string value) #drbdmanage_snapshot_plugin = drbdmanage.plugins.plugins.wait_for.WaitForSnapshot # Volume resize completion wait plugin. (string value) #drbdmanage_resize_plugin = drbdmanage.plugins.plugins.wait_for.WaitForVolumeSize # If set, the c-vol node will receive a useable # /dev/drbdX device, even if the actual data is stored on # other nodes only. # This is useful for debugging, maintenance, and to be # able to do the iSCSI export from the c-vol node. (boolean # value) #drbdmanage_devs_on_controller = true # FSS pool id in which FalconStor volumes are stored. (integer value) #fss_pool = # Specifies FSS secondary management IP to be used if san_ip is invalid or # becomes inaccessible. (string value) #fss_san_secondary_ip = # Enable HTTP debugging to FSS (boolean value) #fss_debug = false # FSS additional retry list, separate by ; (string value) #additional_retry_list = # config file for cinder eternus_dx volume driver (string value) #cinder_eternus_config_file = /etc/cinder/cinder_fujitsu_eternus_dx.xml # The flag of thin storage allocation. (boolean value) #dsware_isthin = false # Fusionstorage manager ip addr for cinder-volume. (string value) #dsware_manager = # Fusionstorage agent ip addr range. (string value) #fusionstorageagent = # Pool type, like sata-2copy. (string value) #pool_type = default # Pool id permit to use. (list value) #pool_id_filter = # Create clone volume timeout. (integer value) #clone_volume_timeout = 680 # Space network name to use for data transfer (string value) #hgst_net = Net 1 (IPv4) # Comma separated list of Space storage servers:devices. ex: # os1_stor:gbd0,os2_stor:gbd0 (string value) #hgst_storage_servers = os:gbd0 # Should spaces be redundantly stored (1/0) (string value) #hgst_redundancy = 0 # User to own created spaces (string value) #hgst_space_user = root # Group to own created spaces (string value) #hgst_space_group = disk # UNIX mode for created spaces (string value) #hgst_space_mode = 0600 # Serial number of storage system (string value) #hitachi_serial_number = # Name of an array unit (string value) #hitachi_unit_name = # Pool ID of storage system (integer value) #hitachi_pool_id = # Thin pool ID of storage system (integer value) #hitachi_thin_pool_id = # Range of logical device of storage system (string value) #hitachi_ldev_range = # Default copy method of storage system (string value) #hitachi_default_copy_method = FULL # Copy speed of storage system (integer value) #hitachi_copy_speed = 3 # Interval to check copy (integer value) #hitachi_copy_check_interval = 3 # Interval to check copy asynchronously (integer value) #hitachi_async_copy_check_interval = 10 # Control port names for HostGroup or iSCSI Target (string value) #hitachi_target_ports = # Range of group number (string value) #hitachi_group_range = # Request for creating HostGroup or iSCSI Target (boolean value) #hitachi_group_request = false # Request for FC Zone creating HostGroup (boolean value) #hitachi_zoning_request = false # Instance numbers for HORCM (string value) #hitachi_horcm_numbers = 200,201 # Username of storage system for HORCM (string value) #hitachi_horcm_user = # Password of storage system for HORCM (string value) #hitachi_horcm_password = # Add to HORCM configuration (boolean value) #hitachi_horcm_add_conf = true # Timeout until a resource lock is released, in seconds. The value must be # between 0 and 7200. (integer value) #hitachi_horcm_resource_lock_timeout = 600 # Add CHAP user (boolean value) #hitachi_add_chap_user = false # iSCSI authentication method (string value) #hitachi_auth_method = # iSCSI authentication username (string value) #hitachi_auth_user = HBSD-CHAP-user # iSCSI authentication password (string value) #hitachi_auth_password = HBSD-CHAP-password # DEPRECATED: Legacy configuration file for HNAS iSCSI Cinder plugin. This is # not needed if you fill all configuration on cinder.conf (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. #hds_hnas_iscsi_config_file = /opt/hds/hnas/cinder_iscsi_conf.xml # Whether the chap authentication is enabled in the iSCSI target or not. # (boolean value) #hnas_chap_enabled = true # Service 0 iSCSI IP (IP address value) #hnas_svc0_iscsi_ip = # Service 1 iSCSI IP (IP address value) #hnas_svc1_iscsi_ip = # Service 2 iSCSI IP (IP address value) #hnas_svc2_iscsi_ip = # Service 3 iSCSI IP (IP address value) #hnas_svc3_iscsi_ip = # DEPRECATED: Legacy configuration file for HNAS NFS Cinder plugin. This is not # needed if you fill all configuration on cinder.conf (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. #hds_hnas_nfs_config_file = /opt/hds/hnas/cinder_nfs_conf.xml # Management IP address of HNAS. This can be any IP in the admin address on # HNAS or the SMU IP. (IP address value) #hnas_mgmt_ip0 = # Command to communicate to HNAS. (string value) #hnas_ssc_cmd = ssc # HNAS username. (string value) #hnas_username = # HNAS password. (string value) #hnas_password = # Port to be used for SSH authentication. (port value) # Minimum value: 0 # Maximum value: 65535 #hnas_ssh_port = 22 # Path to the SSH private key used to authenticate in HNAS SMU. (string value) #hnas_ssh_private_key = # The IP of the HNAS cluster admin. Required only for HNAS multi-cluster # setups. (string value) #hnas_cluster_admin_ip0 = # Service 0 pool name (string value) # Deprecated group/name - [DEFAULT]/hnas_svc0_volume_type #hnas_svc0_pool_name = # Service 0 HDP (string value) #hnas_svc0_hdp = # Service 1 pool name (string value) # Deprecated group/name - [DEFAULT]/hnas_svc1_volume_type #hnas_svc1_pool_name = # Service 1 HDP (string value) #hnas_svc1_hdp = # Service 2 pool name (string value) # Deprecated group/name - [DEFAULT]/hnas_svc2_volume_type #hnas_svc2_pool_name = # Service 2 HDP (string value) #hnas_svc2_hdp = # Service 3 pool name: (string value) # Deprecated group/name - [DEFAULT]/hnas_svc3_volume_type #hnas_svc3_pool_name = # Service 3 HDP (string value) #hnas_svc3_hdp = # Product number of the storage system. (string value) #vsp_storage_id = # Pool number or pool name of the DP pool. (string value) #vsp_pool = # Pool number or pool name of the Thin Image pool. (string value) #vsp_thin_pool = # Range of the LDEV numbers in the format of 'xxxx-yyyy' that can be used by # the driver. Values can be in decimal format (e.g. 1000) or in colon-separated # hexadecimal format (e.g. 00:03:E8). (string value) #vsp_ldev_range = # Method of volume copy. FULL indicates full data copy by Shadow Image and THIN # indicates differential data copy by Thin Image. (string value) # Allowed values: FULL, THIN #vsp_default_copy_method = FULL # Speed at which data is copied by Shadow Image. 1 or 2 indicates low speed, 3 # indicates middle speed, and a value between 4 and 15 indicates high speed. # (integer value) # Minimum value: 1 # Maximum value: 15 #vsp_copy_speed = 3 # Interval in seconds at which volume pair synchronization status is checked # when volume pairs are created. (integer value) # Minimum value: 1 # Maximum value: 600 #vsp_copy_check_interval = 3 # Interval in seconds at which volume pair synchronization status is checked # when volume pairs are deleted. (integer value) # Minimum value: 1 # Maximum value: 600 #vsp_async_copy_check_interval = 10 # IDs of the storage ports used to attach volumes to the controller node. To # specify multiple ports, connect them by commas (e.g. CL1-A,CL2-A). (list # value) #vsp_target_ports = # IDs of the storage ports used to attach volumes to compute nodes. To specify # multiple ports, connect them by commas (e.g. CL1-A,CL2-A). (list value) #vsp_compute_target_ports = # If True, the driver will create host groups or iSCSI targets on storage ports # as needed. (boolean value) #vsp_group_request = false # If True, the driver will configure FC zoning between the server and the # storage system provided that FC zoning manager is enabled. (boolean value) #vsp_zoning_request = false # Warning: Failed to format sample for vsp_horcm_numbers # sequence item 0: expected string, int found # Name of the user on the storage system. (string value) #vsp_horcm_user = # Password corresponding to vsp_horcm_user. (string value) #vsp_horcm_password = # If True, the driver will create or update the Command Control Interface # configuration file as needed. (boolean value) #vsp_horcm_add_conf = true # IDs of the storage ports used to copy volumes by Shadow Image or Thin Image. # To specify multiple ports, connect them by commas (e.g. CL1-A,CL2-A). (list # value) #vsp_horcm_pair_target_ports = # If True, CHAP authentication will be applied to communication between hosts # and any of the iSCSI targets on the storage ports. (boolean value) #vsp_use_chap_auth = false # Name of the user used for CHAP authentication performed in communication # between hosts and iSCSI targets on the storage ports. (string value) #vsp_auth_user = # Password corresponding to vsp_auth_user. (string value) #vsp_auth_password = # 3PAR WSAPI Server Url like https://<3par ip>:8080/api/v1 (string value) # Deprecated group/name - [DEFAULT]/hp3par_api_url #hpe3par_api_url = # 3PAR username with the 'edit' role (string value) # Deprecated group/name - [DEFAULT]/hp3par_username #hpe3par_username = # 3PAR password for the user specified in hpe3par_username (string value) # Deprecated group/name - [DEFAULT]/hp3par_password #hpe3par_password = # List of the CPG(s) to use for volume creation (list value) # Deprecated group/name - [DEFAULT]/hp3par_cpg #hpe3par_cpg = OpenStack # The CPG to use for Snapshots for volumes. If empty the userCPG will be used. # (string value) # Deprecated group/name - [DEFAULT]/hp3par_cpg_snap #hpe3par_cpg_snap = # The time in hours to retain a snapshot. You can't delete it before this # expires. (string value) # Deprecated group/name - [DEFAULT]/hp3par_snapshot_retention #hpe3par_snapshot_retention = # The time in hours when a snapshot expires and is deleted. This must be # larger than expiration (string value) # Deprecated group/name - [DEFAULT]/hp3par_snapshot_expiration #hpe3par_snapshot_expiration = # Enable HTTP debugging to 3PAR (boolean value) # Deprecated group/name - [DEFAULT]/hp3par_debug #hpe3par_debug = false # List of target iSCSI addresses to use. (list value) # Deprecated group/name - [DEFAULT]/hp3par_iscsi_ips #hpe3par_iscsi_ips = # Enable CHAP authentication for iSCSI connections. (boolean value) # Deprecated group/name - [DEFAULT]/hp3par_iscsi_chap_enabled #hpe3par_iscsi_chap_enabled = false # HPE LeftHand WSAPI Server Url like https://:8081/lhos (uri # value) # Deprecated group/name - [DEFAULT]/hplefthand_api_url #hpelefthand_api_url = # HPE LeftHand Super user username (string value) # Deprecated group/name - [DEFAULT]/hplefthand_username #hpelefthand_username = # HPE LeftHand Super user password (string value) # Deprecated group/name - [DEFAULT]/hplefthand_password #hpelefthand_password = # HPE LeftHand cluster name (string value) # Deprecated group/name - [DEFAULT]/hplefthand_clustername #hpelefthand_clustername = # Configure CHAP authentication for iSCSI connections (Default: Disabled) # (boolean value) # Deprecated group/name - [DEFAULT]/hplefthand_iscsi_chap_enabled #hpelefthand_iscsi_chap_enabled = false # Enable HTTP debugging to LeftHand (boolean value) # Deprecated group/name - [DEFAULT]/hplefthand_debug #hpelefthand_debug = false # Port number of SSH service. (port value) # Minimum value: 0 # Maximum value: 65535 #hpelefthand_ssh_port = 16022 # Request for FC Zone creating host group (boolean value) # Deprecated group/name - [DEFAULT]/hpxp_zoning_request #hpexp_zoning_request = false # Type of storage command line interface (string value) # Deprecated group/name - [DEFAULT]/hpxp_storage_cli #hpexp_storage_cli = # ID of storage system (string value) # Deprecated group/name - [DEFAULT]/hpxp_storage_id #hpexp_storage_id = # Pool of storage system (string value) # Deprecated group/name - [DEFAULT]/hpxp_pool #hpexp_pool = # Thin pool of storage system (string value) # Deprecated group/name - [DEFAULT]/hpxp_thin_pool #hpexp_thin_pool = # Logical device range of storage system (string value) # Deprecated group/name - [DEFAULT]/hpxp_ldev_range #hpexp_ldev_range = # Default copy method of storage system. There are two valid values: "FULL" # specifies that a full copy; "THIN" specifies that a thin copy. Default value # is "FULL" (string value) # Deprecated group/name - [DEFAULT]/hpxp_default_copy_method #hpexp_default_copy_method = FULL # Copy speed of storage system (integer value) # Deprecated group/name - [DEFAULT]/hpxp_copy_speed #hpexp_copy_speed = 3 # Interval to check copy (integer value) # Deprecated group/name - [DEFAULT]/hpxp_copy_check_interval #hpexp_copy_check_interval = 3 # Interval to check copy asynchronously (integer value) # Deprecated group/name - [DEFAULT]/hpxp_async_copy_check_interval #hpexp_async_copy_check_interval = 10 # Target port names for host group or iSCSI target (list value) # Deprecated group/name - [DEFAULT]/hpxp_target_ports #hpexp_target_ports = # Target port names of compute node for host group or iSCSI target (list value) # Deprecated group/name - [DEFAULT]/hpxp_compute_target_ports #hpexp_compute_target_ports = # Request for creating host group or iSCSI target (boolean value) # Deprecated group/name - [DEFAULT]/hpxp_group_request #hpexp_group_request = false # Instance numbers for HORCM (list value) # Deprecated group/name - [DEFAULT]/hpxp_horcm_numbers #hpexp_horcm_numbers = 200,201 # Username of storage system for HORCM (string value) # Deprecated group/name - [DEFAULT]/hpxp_horcm_user #hpexp_horcm_user = # Add to HORCM configuration (boolean value) # Deprecated group/name - [DEFAULT]/hpxp_horcm_add_conf #hpexp_horcm_add_conf = true # Resource group name of storage system for HORCM (string value) # Deprecated group/name - [DEFAULT]/hpxp_horcm_resource_name #hpexp_horcm_resource_name = meta_resource # Only discover a specific name of host group or iSCSI target (boolean value) # Deprecated group/name - [DEFAULT]/hpxp_horcm_name_only_discovery #hpexp_horcm_name_only_discovery = false # The configuration file for the Cinder Huawei driver. (string value) #cinder_huawei_conf_file = /etc/cinder/cinder_huawei_conf.xml # The remote device hypermetro will use. (string value) #hypermetro_devices = # The remote metro device san user. (string value) #metro_san_user = # The remote metro device san password. (string value) #metro_san_password = # The remote metro device domain name. (string value) #metro_domain_name = # The remote metro device request url. (string value) #metro_san_address = # The remote metro device pool names. (string value) #metro_storage_pools = # Connection protocol should be FC. (Default is FC.) (string value) #flashsystem_connection_protocol = FC # Allows vdisk to multi host mapping. (Default is True) (boolean value) #flashsystem_multihostmap_enabled = true # DEPRECATED: This option no longer has any affect. It is deprecated and will # be removed in the next release. (boolean value) # This option is deprecated for removal. # Its value may be silently ignored in the future. #flashsystem_multipath_enabled = false # Default iSCSI Port ID of FlashSystem. (Default port is 0.) (integer value) #flashsystem_iscsi_portid = 0 # Specifies the path of the GPFS directory where Block Storage volume and # snapshot files are stored. (string value) #gpfs_mount_point_base = # Specifies the path of the Image service repository in GPFS. Leave undefined # if not storing images in GPFS. (string value) #gpfs_images_dir = # Specifies the type of image copy to be used. Set this when the Image service # repository also uses GPFS so that image files can be transferred efficiently # from the Image service to the Block Storage service. There are two valid # values: "copy" specifies that a full copy of the image is made; # "copy_on_write" specifies that copy-on-write optimization strategy is used # and unmodified blocks of the image file are shared efficiently. (string # value) # Allowed values: copy, copy_on_write, #gpfs_images_share_mode = # Specifies an upper limit on the number of indirections required to reach a # specific block due to snapshots or clones. A lengthy chain of copy-on-write # snapshots or clones can have a negative impact on performance, but improves # space utilization. 0 indicates unlimited clone depth. (integer value) #gpfs_max_clone_depth = 0 # Specifies that volumes are created as sparse files which initially consume no # space. If set to False, the volume is created as a fully allocated file, in # which case, creation may take a significantly longer time. (boolean value) #gpfs_sparse_volumes = true # Specifies the storage pool that volumes are assigned to. By default, the # system storage pool is used. (string value) #gpfs_storage_pool = system # Mapping between IODevice address and unit address. (string value) #ds8k_devadd_unitadd_mapping = # Set the first two digits of SSID (string value) #ds8k_ssid_prefix = FF # Set to zLinux if your OpenStack version is prior to Liberty and you're # connecting to zLinux systems. Otherwise set to auto. Valid values for this # parameter are: 'auto', 'AMDLinuxRHEL', 'AMDLinuxSuse', 'AppleOSX', 'Fujitsu', # 'Hp', 'HpTru64', 'HpVms', 'LinuxDT', 'LinuxRF', 'LinuxRHEL', 'LinuxSuse', # 'Novell', 'SGI', 'SVC', 'SanFsAIX', 'SanFsLinux', 'Sun', 'VMWare', 'Win2000', # 'Win2003', 'Win2008', 'Win2012', 'iLinux', 'nSeries', 'pLinux', 'pSeries', # 'pSeriesPowerswap', 'zLinux', 'iSeries'. (string value) #ds8k_host_type = auto # Proxy driver that connects to the IBM Storage Array (string value) #proxy = cinder.volume.drivers.ibm.ibm_storage.proxy.IBMStorageProxy # Connection type to the IBM Storage Array (string value) # Allowed values: fibre_channel, iscsi #connection_type = iscsi # CHAP authentication mode, effective only for iscsi (disabled|enabled) (string # value) # Allowed values: disabled, enabled #chap = disabled # List of Management IP addresses (separated by commas) (string value) #management_ips = # Comma separated list of storage system storage pools for volumes. (list # value) #storwize_svc_volpool_name = volpool # Storage system space-efficiency parameter for volumes (percentage) (integer # value) # Minimum value: -1 # Maximum value: 100 #storwize_svc_vol_rsize = 2 # Storage system threshold for volume capacity warnings (percentage) (integer # value) # Minimum value: -1 # Maximum value: 100 #storwize_svc_vol_warning = 0 # Storage system autoexpand parameter for volumes (True/False) (boolean value) #storwize_svc_vol_autoexpand = true # Storage system grain size parameter for volumes (32/64/128/256) (integer # value) #storwize_svc_vol_grainsize = 256 # Storage system compression option for volumes (boolean value) #storwize_svc_vol_compression = false # Enable Easy Tier for volumes (boolean value) #storwize_svc_vol_easytier = true # The I/O group in which to allocate volumes (integer value) #storwize_svc_vol_iogrp = 0 # Maximum number of seconds to wait for FlashCopy to be prepared. (integer # value) # Minimum value: 1 # Maximum value: 600 #storwize_svc_flashcopy_timeout = 120 # DEPRECATED: This option no longer has any affect. It is deprecated and will # be removed in the next release. (boolean value) # This option is deprecated for removal. # Its value may be silently ignored in the future. #storwize_svc_multihostmap_enabled = true # Allow tenants to specify QOS on create (boolean value) #storwize_svc_allow_tenant_qos = false # If operating in stretched cluster mode, specify the name of the pool in which # mirrored copies are stored.Example: "pool2" (string value) #storwize_svc_stretched_cluster_partner = # Specifies secondary management IP or hostname to be used if san_ip is invalid # or becomes inaccessible. (string value) #storwize_san_secondary_ip = # Specifies that the volume not be formatted during creation. (boolean value) #storwize_svc_vol_nofmtdisk = false # Specifies the Storwize FlashCopy copy rate to be used when creating a full # volume copy. The default is rate is 50, and the valid rates are 1-100. # (integer value) # Minimum value: 1 # Maximum value: 100 #storwize_svc_flashcopy_rate = 50 # Connect with multipath (FC only; iSCSI multipath is controlled by Nova) # (boolean value) #storwize_svc_multipath_enabled = false # Configure CHAP authentication for iSCSI connections (Default: Enabled) # (boolean value) #storwize_svc_iscsi_chap_enabled = true # Name of the pool from which volumes are allocated (string value) #infinidat_pool_name = # Infortrend raid pool name list. It is separated with comma. (string value) #infortrend_pools_name = # The Infortrend CLI absolute path. By default, it is at # /opt/bin/Infortrend/raidcmd_ESDS10.jar (string value) #infortrend_cli_path = /opt/bin/Infortrend/raidcmd_ESDS10.jar # Maximum retry time for cli. Default is 5. (integer value) #infortrend_cli_max_retries = 5 # Default timeout for CLI copy operations in minutes. Support: migrate volume, # create cloned volume and create volume from snapshot. By Default, it is 30 # minutes. (integer value) #infortrend_cli_timeout = 30 # Infortrend raid channel ID list on Slot A for OpenStack usage. It is # separated with comma. By default, it is the channel 0~7. (string value) #infortrend_slots_a_channels_id = 0,1,2,3,4,5,6,7 # Infortrend raid channel ID list on Slot B for OpenStack usage. It is # separated with comma. By default, it is the channel 0~7. (string value) #infortrend_slots_b_channels_id = 0,1,2,3,4,5,6,7 # Let the volume use specific provisioning. By default, it is the full # provisioning. The supported options are full or thin. (string value) #infortrend_provisioning = full # Let the volume use specific tiering level. By default, it is the level 0. The # supported levels are 0,2,3,4. (string value) #infortrend_tiering = 0 # K2 driver will calculate max_oversubscription_ratio on setting this option as # True. (boolean value) #auto_calc_max_oversubscription_ratio = false # Pool or Vdisk name to use for volume creation. (string value) #lenovo_backend_name = A # linear (for VDisk) or virtual (for Pool). (string value) # Allowed values: linear, virtual #lenovo_backend_type = virtual # Lenovo api interface protocol. (string value) # Allowed values: http, https #lenovo_api_protocol = https # Whether to verify Lenovo array SSL certificate. (boolean value) #lenovo_verify_certificate = false # Lenovo array SSL certificate path. (string value) #lenovo_verify_certificate_path = # List of comma-separated target iSCSI IP addresses. (list value) #lenovo_iscsi_ips = # Name for the VG that will contain exported volumes (string value) #volume_group = cinder-volumes # If >0, create LVs with multiple mirrors. Note that this requires lvm_mirrors # + 2 PVs with available space (integer value) #lvm_mirrors = 0 # Type of LVM volumes to deploy; (default, thin, or auto). Auto defaults to # thin if thin is supported. (string value) # Allowed values: default, thin, auto #lvm_type = default # LVM conf file to use for the LVM driver in Cinder; this setting is ignored if # the specified file does not exist (You can also specify 'None' to not use a # conf file even if one exists). (string value) #lvm_conf_file = /etc/cinder/lvm.conf # max_over_subscription_ratio setting for the LVM driver. If set, this takes # precedence over the general max_over_subscription_ratio option. If None, the # general option is used. (floating point value) #lvm_max_over_subscription_ratio = 1.0 # Suppress leaked file descriptor warnings in LVM commands. (boolean value) #lvm_suppress_fd_warnings = false # The storage family type used on the storage system; valid values are # ontap_7mode for using Data ONTAP operating in 7-Mode, ontap_cluster for using # clustered Data ONTAP, or eseries for using E-Series. (string value) # Allowed values: ontap_7mode, ontap_cluster, eseries #netapp_storage_family = ontap_cluster # The storage protocol to be used on the data path with the storage system. # (string value) # Allowed values: iscsi, fc, nfs #netapp_storage_protocol = # The hostname (or IP address) for the storage system or proxy server. (string # value) #netapp_server_hostname = # The TCP port to use for communication with the storage system or proxy # server. If not specified, Data ONTAP drivers will use 80 for HTTP and 443 for # HTTPS; E-Series will use 8080 for HTTP and 8443 for HTTPS. (integer value) #netapp_server_port = # The transport protocol used when communicating with the storage system or # proxy server. (string value) # Allowed values: http, https #netapp_transport_type = http # Administrative user account name used to access the storage system or proxy # server. (string value) #netapp_login = # Password for the administrative user account specified in the netapp_login # option. (string value) #netapp_password = # This option specifies the virtual storage server (Vserver) name on the # storage cluster on which provisioning of block storage volumes should occur. # (string value) #netapp_vserver = # The vFiler unit on which provisioning of block storage volumes will be done. # This option is only used by the driver when connecting to an instance with a # storage family of Data ONTAP operating in 7-Mode. Only use this option when # utilizing the MultiStore feature on the NetApp storage system. (string value) #netapp_vfiler = # The name of the config.conf stanza for a Data ONTAP (7-mode) HA partner. # This option is only used by the driver when connecting to an instance with a # storage family of Data ONTAP operating in 7-Mode, and it is required if the # storage protocol selected is FC. (string value) #netapp_partner_backend_name = # The quantity to be multiplied by the requested volume size to ensure enough # space is available on the virtual storage server (Vserver) to fulfill the # volume creation request. Note: this option is deprecated and will be removed # in favor of "reserved_percentage" in the Mitaka release. (floating point # value) #netapp_size_multiplier = 1.2 # This option determines if storage space is reserved for LUN allocation. If # enabled, LUNs are thick provisioned. If space reservation is disabled, # storage space is allocated on demand. (string value) # Allowed values: enabled, disabled #netapp_lun_space_reservation = enabled # If the percentage of available space for an NFS share has dropped below the # value specified by this option, the NFS image cache will be cleaned. (integer # value) #thres_avl_size_perc_start = 20 # When the percentage of available space on an NFS share has reached the # percentage specified by this option, the driver will stop clearing files from # the NFS image cache that have not been accessed in the last M minutes, where # M is the value of the expiry_thres_minutes configuration option. (integer # value) #thres_avl_size_perc_stop = 60 # This option specifies the threshold for last access time for images in the # NFS image cache. When a cache cleaning cycle begins, images in the cache that # have not been accessed in the last M minutes, where M is the value of this # parameter, will be deleted from the cache to create free space on the NFS # share. (integer value) #expiry_thres_minutes = 720 # This option is used to specify the path to the E-Series proxy application on # a proxy server. The value is combined with the value of the # netapp_transport_type, netapp_server_hostname, and netapp_server_port options # to create the URL used by the driver to connect to the proxy application. # (string value) #netapp_webservice_path = /devmgr/v2 # This option is only utilized when the storage family is configured to # eseries. This option is used to restrict provisioning to the specified # controllers. Specify the value of this option to be a comma separated list of # controller hostnames or IP addresses to be used for provisioning. (string # value) #netapp_controller_ips = # Password for the NetApp E-Series storage array. (string value) #netapp_sa_password = # This option specifies whether the driver should allow operations that require # multiple attachments to a volume. An example would be live migration of # servers that have volumes attached. When enabled, this backend is limited to # 256 total volumes in order to guarantee volumes can be accessed by more than # one host. (boolean value) #netapp_enable_multiattach = false # This option specifies the path of the NetApp copy offload tool binary. Ensure # that the binary has execute permissions set which allow the effective user of # the cinder-volume process to execute the file. (string value) #netapp_copyoffload_tool_path = # This option defines the type of operating system that will access a LUN # exported from Data ONTAP; it is assigned to the LUN at the time it is # created. (string value) #netapp_lun_ostype = # This option defines the type of operating system for all initiators that can # access a LUN. This information is used when mapping LUNs to individual hosts # or groups of hosts. (string value) # Deprecated group/name - [DEFAULT]/netapp_eseries_host_type #netapp_host_type = # This option is used to restrict provisioning to the specified pools. Specify # the value of this option to be a regular expression which will be applied to # the names of objects from the storage backend which represent pools in # Cinder. This option is only utilized when the storage protocol is configured # to use iSCSI or FC. (string value) # Deprecated group/name - [DEFAULT]/netapp_volume_list # Deprecated group/name - [DEFAULT]/netapp_storage_pools #netapp_pool_name_search_pattern = (.+) # Multi opt of dictionaries to represent the aggregate mapping between source # and destination back ends when using whole back end replication. For every # source aggregate associated with a cinder pool (NetApp FlexVol), you would # need to specify the destination aggregate on the replication target device. A # replication target device is configured with the configuration option # replication_device. Specify this option as many times as you have replication # devices. Each entry takes the standard dict config form: # netapp_replication_aggregate_map = # backend_id:,src_aggr_name1:dest_aggr_name1,src_aggr_name2:dest_aggr_name2,... # (dict value) #netapp_replication_aggregate_map = # The maximum time in seconds to wait for existing SnapMirror transfers to # complete before aborting during a failover. (integer value) # Minimum value: 0 #netapp_snapmirror_quiesce_timeout = 3600 # IP address of Nexenta SA (string value) #nexenta_host = # HTTP(S) port to connect to Nexenta REST API server. If it is equal zero, 8443 # for HTTPS and 8080 for HTTP is used (integer value) #nexenta_rest_port = 0 # Use http or https for REST connection (default auto) (string value) # Allowed values: http, https, auto #nexenta_rest_protocol = auto # Use secure HTTP for REST connection (default True) (boolean value) #nexenta_use_https = true # User name to connect to Nexenta SA (string value) #nexenta_user = admin # Password to connect to Nexenta SA (string value) #nexenta_password = nexenta # Nexenta target portal port (integer value) #nexenta_iscsi_target_portal_port = 3260 # SA Pool that holds all volumes (string value) #nexenta_volume = cinder # IQN prefix for iSCSI targets (string value) #nexenta_target_prefix = iqn.1986-03.com.sun:02:cinder- # Prefix for iSCSI target groups on SA (string value) #nexenta_target_group_prefix = cinder/ # Volume group for ns5 (string value) #nexenta_volume_group = iscsi # Compression value for new ZFS folders. (string value) # Allowed values: on, off, gzip, gzip-1, gzip-2, gzip-3, gzip-4, gzip-5, gzip-6, gzip-7, gzip-8, gzip-9, lzjb, zle, lz4 #nexenta_dataset_compression = on # Deduplication value for new ZFS folders. (string value) # Allowed values: on, off, sha256, verify, sha256, verify #nexenta_dataset_dedup = off # Human-readable description for the folder. (string value) #nexenta_dataset_description = # Block size for datasets (integer value) #nexenta_blocksize = 4096 # Block size for datasets (integer value) #nexenta_ns5_blocksize = 32 # Enables or disables the creation of sparse datasets (boolean value) #nexenta_sparse = false # File with the list of available nfs shares (string value) #nexenta_shares_config = /etc/cinder/nfs_shares # Base directory that contains NFS share mount points (string value) #nexenta_mount_point_base = $state_path/mnt # Enables or disables the creation of volumes as sparsed files that take no # space. If disabled (False), volume is created as a regular file, which takes # a long time. (boolean value) #nexenta_sparsed_volumes = true # If set True cache NexentaStor appliance volroot option value. (boolean value) #nexenta_nms_cache_volroot = true # Enable stream compression, level 1..9. 1 - gives best speed; 9 - gives best # compression. (integer value) #nexenta_rrmgr_compression = 0 # TCP Buffer size in KiloBytes. (integer value) #nexenta_rrmgr_tcp_buf_size = 4096 # Number of TCP connections. (integer value) #nexenta_rrmgr_connections = 2 # NexentaEdge logical path of directory to store symbolic links to NBDs (string # value) #nexenta_nbd_symlinks_dir = /dev/disk/by-path # IP address of NexentaEdge management REST API endpoint (string value) #nexenta_rest_address = # User name to connect to NexentaEdge (string value) #nexenta_rest_user = admin # Password to connect to NexentaEdge (string value) #nexenta_rest_password = nexenta # NexentaEdge logical path of bucket for LUNs (string value) #nexenta_lun_container = # NexentaEdge iSCSI service name (string value) #nexenta_iscsi_service = # NexentaEdge iSCSI Gateway client address for non-VIP service (string value) #nexenta_client_address = # NexentaEdge iSCSI LUN object chunk size (integer value) #nexenta_chunksize = 32768 # File with the list of available NFS shares. (string value) #nfs_shares_config = /etc/cinder/nfs_shares # Create volumes as sparsed files which take no space. If set to False volume # is created as regular file. In such case volume creation takes a lot of time. # (boolean value) #nfs_sparsed_volumes = true # Create volumes as QCOW2 files rather than raw files. (boolean value) #nfs_qcow2_volumes = false # Base dir containing mount points for NFS shares. (string value) #nfs_mount_point_base = $state_path/mnt # Mount options passed to the NFS client. See section of the NFS man page for # details. (string value) #nfs_mount_options = # The number of attempts to mount NFS shares before raising an error. At least # one attempt will be made to mount an NFS share, regardless of the value # specified. (integer value) #nfs_mount_attempts = 3 # Enable support for snapshots on the NFS driver. Platforms using libvirt # <1.2.7 will encounter issues with this feature. (boolean value) #nfs_snapshot_support = false # Nimble Controller pool name (string value) #nimble_pool_name = default # Nimble Subnet Label (string value) #nimble_subnet_label = * # Whether to verify Nimble SSL Certificate (string value) #nimble_verify_certificate = False # Path to Nimble Array SSL certificate (string value) #nimble_verify_cert_path = # DPL pool uuid in which DPL volumes are stored. (string value) #dpl_pool = # DPL port number. (port value) # Minimum value: 0 # Maximum value: 65535 #dpl_port = 8357 # REST API authorization token. (string value) #pure_api_token = # Automatically determine an oversubscription ratio based on the current total # data reduction values. If used this calculated value will override the # max_over_subscription_ratio config option. (boolean value) #pure_automatic_max_oversubscription_ratio = true # Snapshot replication interval in seconds. (integer value) #pure_replica_interval_default = 900 # Retain all snapshots on target for this time (in seconds.) (integer value) #pure_replica_retention_short_term_default = 14400 # Retain how many snapshots for each day. (integer value) #pure_replica_retention_long_term_per_day_default = 3 # Retain snapshots per day on target for this time (in days.) (integer value) #pure_replica_retention_long_term_default = 7 # When enabled, all Pure volumes, snapshots, and protection groups will be # eradicated at the time of deletion in Cinder. Data will NOT be recoverable # after a delete with this set to True! When disabled, volumes and snapshots # will go into pending eradication state and can be recovered. (boolean value) #pure_eradicate_on_delete = false # The URL to management QNAP Storage (uri value) #qnap_management_url = # The pool name in the QNAP Storage (string value) #qnap_poolname = # Communication protocol to access QNAP storage (string value) #qnap_storage_protocol = iscsi # URL to the Quobyte volume e.g., quobyte:/// (uri # value) #quobyte_volume_url = # Path to a Quobyte Client configuration file. (string value) #quobyte_client_cfg = # Create volumes as sparse files which take no space. If set to False, volume # is created as regular file.In such case volume creation takes a lot of time. # (boolean value) #quobyte_sparsed_volumes = true # Create volumes as QCOW2 files rather than raw files. (boolean value) #quobyte_qcow2_volumes = true # Base dir containing the mount point for the Quobyte volume. (string value) #quobyte_mount_point_base = $state_path/mnt # The name of ceph cluster (string value) #rbd_cluster_name = ceph # The RADOS pool where rbd volumes are stored (string value) #rbd_pool = rbd # The RADOS client name for accessing rbd volumes - only set when using cephx # authentication (string value) #rbd_user = # Path to the ceph configuration file (string value) #rbd_ceph_conf = # Flatten volumes created from snapshots to remove dependency from volume to # snapshot (boolean value) #rbd_flatten_volume_from_snapshot = false # The libvirt uuid of the secret for the rbd_user volumes (string value) #rbd_secret_uuid = # Maximum number of nested volume clones that are taken before a flatten # occurs. Set to 0 to disable cloning. (integer value) #rbd_max_clone_depth = 5 # Volumes will be chunked into objects of this size (in megabytes). (integer # value) #rbd_store_chunk_size = 4 # Timeout value (in seconds) used when connecting to ceph cluster. If value < # 0, no timeout is set and default librados value is used. (integer value) #rados_connect_timeout = -1 # Number of retries if connection to ceph cluster failed. (integer value) #rados_connection_retries = 3 # Interval value (in seconds) between connection retries to ceph cluster. # (integer value) #rados_connection_interval = 5 # Timeout value (in seconds) used when connecting to ceph cluster to do a # demotion/promotion of volumes. If value < 0, no timeout is set and default # librados value is used. (integer value) #replication_connect_timeout = 5 # IP address or Hostname of NAS system. (string value) # Deprecated group/name - [DEFAULT]/nas_ip #nas_host = # User name to connect to NAS system. (string value) #nas_login = admin # Password to connect to NAS system. (string value) #nas_password = # SSH port to use to connect to NAS system. (port value) # Minimum value: 0 # Maximum value: 65535 #nas_ssh_port = 22 # Filename of private key to use for SSH authentication. (string value) #nas_private_key = # Allow network-attached storage systems to operate in a secure environment # where root level access is not permitted. If set to False, access is as the # root user and insecure. If set to True, access is not as root. If set to # auto, a check is done to determine if this is a new installation: True is # used if so, otherwise False. Default is auto. (string value) #nas_secure_file_operations = auto # Set more secure file permissions on network-attached storage volume files to # restrict broad other/world access. If set to False, volumes are created with # open permissions. If set to True, volumes are created with permissions for # the cinder user and group (660). If set to auto, a check is done to determine # if this is a new installation: True is used if so, otherwise False. Default # is auto. (string value) #nas_secure_file_permissions = auto # Path to the share to use for storing Cinder volumes. For example: # "/srv/export1" for an NFS server export available at 10.0.5.10:/srv/export1 . # (string value) #nas_share_path = # Options used to mount the storage backend file system where Cinder volumes # are stored. (string value) #nas_mount_options = # Provisioning type that will be used when creating volumes. (string value) # Allowed values: thin, thick #nas_volume_prov_type = thin # Pool or Vdisk name to use for volume creation. (string value) #hpmsa_backend_name = A # linear (for Vdisk) or virtual (for Pool). (string value) # Allowed values: linear, virtual #hpmsa_backend_type = virtual # HPMSA API interface protocol. (string value) # Allowed values: http, https #hpmsa_api_protocol = https # Whether to verify HPMSA array SSL certificate. (boolean value) #hpmsa_verify_certificate = false # HPMSA array SSL certificate path. (string value) #hpmsa_verify_certificate_path = # List of comma-separated target iSCSI IP addresses. (list value) #hpmsa_iscsi_ips = # Use thin provisioning for SAN volumes? (boolean value) #san_thin_provision = true # IP address of SAN controller (string value) #san_ip = # Username for SAN controller (string value) #san_login = admin # Password for SAN controller (string value) #san_password = # Filename of private key to use for SSH authentication (string value) #san_private_key = # Cluster name to use for creating volumes (string value) #san_clustername = # SSH port to use with SAN (port value) # Minimum value: 0 # Maximum value: 65535 #san_ssh_port = 22 # Execute commands locally instead of over SSH; use if the volume service is # running on the SAN device (boolean value) #san_is_local = false # SSH connection timeout in seconds (integer value) #ssh_conn_timeout = 30 # Minimum ssh connections in the pool (integer value) #ssh_min_pool_conn = 1 # Maximum ssh connections in the pool (integer value) #ssh_max_pool_conn = 5 # IP address of sheep daemon. (string value) #sheepdog_store_address = 127.0.0.1 # Port of sheep daemon. (port value) # Minimum value: 0 # Maximum value: 65535 #sheepdog_store_port = 7000 # File with the list of available smbfs shares. (string value) #smbfs_shares_config = /etc/cinder/smbfs_shares # The path of the automatically generated file containing information about # volume disk space allocation. (string value) #smbfs_allocation_info_file_path = $state_path/allocation_data # Default format that will be used when creating volumes if no volume format is # specified. (string value) # Allowed values: raw, qcow2, vhd, vhdx #smbfs_default_volume_format = qcow2 # Create volumes as sparsed files which take no space rather than regular files # when using raw format, in which case volume creation takes lot of time. # (boolean value) #smbfs_sparsed_volumes = true # Percent of ACTUAL usage of the underlying volume before no new volumes can be # allocated to the volume destination. (floating point value) #smbfs_used_ratio = 0.95 # This will compare the allocated to available space on the volume destination. # If the ratio exceeds this number, the destination will no longer be valid. # (floating point value) #smbfs_oversub_ratio = 1.0 # Base dir containing mount points for smbfs shares. (string value) #smbfs_mount_point_base = $state_path/mnt # Mount options passed to the smbfs client. See mount.cifs man page for # details. (string value) #smbfs_mount_options = noperm,file_mode=0775,dir_mode=0775 # Set 512 byte emulation on volume creation; (boolean value) #sf_emulate_512 = true # Allow tenants to specify QOS on create (boolean value) #sf_allow_tenant_qos = false # Create SolidFire accounts with this prefix. Any string can be used here, but # the string "hostname" is special and will create a prefix using the cinder # node hostname (previous default behavior). The default is NO prefix. (string # value) #sf_account_prefix = # Create SolidFire volumes with this prefix. Volume names are of the form # . The default is to use a prefix of # 'UUID-'. (string value) #sf_volume_prefix = UUID- # Account name on the SolidFire Cluster to use as owner of template/cache # volumes (created if does not exist). (string value) #sf_template_account_name = openstack-vtemplate # Create an internal cache of copy of images when a bootable volume is created # to eliminate fetch from glance and qemu-conversion on subsequent calls. # (boolean value) #sf_allow_template_caching = true # Overrides default cluster SVIP with the one specified. This is required or # deployments that have implemented the use of VLANs for iSCSI networks in # their cloud. (string value) #sf_svip = # Create an internal mapping of volume IDs and account. Optimizes lookups and # performance at the expense of memory, very large deployments may want to # consider setting to False. (boolean value) #sf_enable_volume_mapping = true # SolidFire API port. Useful if the device api is behind a proxy on a different # port. (port value) # Minimum value: 0 # Maximum value: 65535 #sf_api_port = 443 # Utilize volume access groups on a per-tenant basis. (boolean value) #sf_enable_vag = false # Volume on Synology storage to be used for creating lun. (string value) #synology_pool_name = # Management port for Synology storage. (port value) # Minimum value: 0 # Maximum value: 65535 #synology_admin_port = 5000 # Administrator of Synology storage. (string value) #synology_username = admin # Password of administrator for logging in Synology storage. (string value) #synology_password = # Do certificate validation or not if $driver_use_ssl is True (boolean value) #synology_ssl_verify = true # One time password of administrator for logging in Synology storage if OTP is # enabled. (string value) #synology_one_time_pass = # Device id for skip one time password check for logging in Synology storage if # OTP is enabled. (string value) #synology_device_id = # Create volumes in this pool (string value) #tegile_default_pool = # Create volumes in this project (string value) #tegile_default_project = # The hostname (or IP address) for the storage system (string value) #tintri_server_hostname = # User name for the storage system (string value) #tintri_server_username = # Password for the storage system (string value) #tintri_server_password = # API version for the storage system (string value) #tintri_api_version = v310 # Delete unused image snapshots older than mentioned days (integer value) #tintri_image_cache_expiry_days = 30 # Path to image nfs shares file (string value) #tintri_image_shares_config = # Global backend request timeout, in seconds. (integer value) #violin_request_timeout = 300 # Storage pools to be used to setup dedup luns only.(Comma separated list) # (list value) #violin_dedup_only_pools = # Storage pools capable of dedup and other luns.(Comma separated list) (list # value) #violin_dedup_capable_pools = # Method of choosing a storage pool for a lun. (string value) # Allowed values: random, largest, smallest #violin_pool_allocation_method = random # Target iSCSI addresses to use.(Comma separated list) (list value) #violin_iscsi_target_ips = # IP address for connecting to VMware vCenter server. (string value) #vmware_host_ip = # Port number for connecting to VMware vCenter server. (port value) # Minimum value: 0 # Maximum value: 65535 #vmware_host_port = 443 # Username for authenticating with VMware vCenter server. (string value) #vmware_host_username = # Password for authenticating with VMware vCenter server. (string value) #vmware_host_password = # Optional VIM service WSDL Location e.g http:///vimService.wsdl. # Optional over-ride to default location for bug work-arounds. (string value) #vmware_wsdl_location = # Number of times VMware vCenter server API must be retried upon connection # related issues. (integer value) #vmware_api_retry_count = 10 # The interval (in seconds) for polling remote tasks invoked on VMware vCenter # server. (floating point value) #vmware_task_poll_interval = 2.0 # Name of the vCenter inventory folder that will contain Cinder volumes. This # folder will be created under "OpenStack/", where # project_folder is of format "Project ()". (string value) #vmware_volume_folder = Volumes # Timeout in seconds for VMDK volume transfer between Cinder and Glance. # (integer value) #vmware_image_transfer_timeout_secs = 7200 # Max number of objects to be retrieved per batch. Query results will be # obtained in batches from the server and not in one shot. Server may still # limit the count to something less than the configured value. (integer value) #vmware_max_objects_retrieval = 100 # Optional string specifying the VMware vCenter server version. The driver # attempts to retrieve the version from VMware vCenter server. Set this # configuration only if you want to override the vCenter server version. # (string value) #vmware_host_version = # Directory where virtual disks are stored during volume backup and restore. # (string value) #vmware_tmp_dir = /tmp # CA bundle file to use in verifying the vCenter server certificate. (string # value) #vmware_ca_file = # If true, the vCenter server certificate is not verified. If false, then the # default CA truststore is used for verification. This option is ignored if # "vmware_ca_file" is set. (boolean value) #vmware_insecure = false # Name of a vCenter compute cluster where volumes should be created. (multi # valued) #vmware_cluster_name = # Maximum number of connections in http connection pool. (integer value) #vmware_connection_pool_size = 10 # File with the list of available vzstorage shares. (string value) #vzstorage_shares_config = /etc/cinder/vzstorage_shares # Create volumes as sparsed files which take no space rather than regular files # when using raw format, in which case volume creation takes lot of time. # (boolean value) #vzstorage_sparsed_volumes = true # Percent of ACTUAL usage of the underlying volume before no new volumes can be # allocated to the volume destination. (floating point value) #vzstorage_used_ratio = 0.95 # Base dir containing mount points for vzstorage shares. (string value) #vzstorage_mount_point_base = $state_path/mnt # Mount options passed to the vzstorage client. See section of the pstorage- # mount man page for details. (list value) #vzstorage_mount_options = # Default format that will be used when creating volumes if no volume format is # specified. (string value) #vzstorage_default_volume_format = raw # Path to store VHD backed volumes (string value) #windows_iscsi_lun_path = C:\iSCSIVirtualDisks # Default storage pool for volumes. (integer value) #ise_storage_pool = 1 # Raid level for ISE volumes. (integer value) #ise_raid = 1 # Number of retries (per port) when establishing connection to ISE management # port. (integer value) #ise_connection_retries = 5 # Interval (secs) between retries. (integer value) #ise_retry_interval = 1 # Number on retries to get completion status after issuing a command to ISE. # (integer value) #ise_completion_retries = 30 # VPSA - Use ISER instead of iSCSI (boolean value) #zadara_use_iser = true # VPSA - Management Host name or IP address (string value) #zadara_vpsa_host = # VPSA - Port number (port value) # Minimum value: 0 # Maximum value: 65535 #zadara_vpsa_port = # VPSA - Use SSL connection (boolean value) #zadara_vpsa_use_ssl = false # VPSA - Username (string value) #zadara_user = # VPSA - Password (string value) #zadara_password = # VPSA - Storage Pool assigned for volumes (string value) #zadara_vpsa_poolname = # VPSA - Default encryption policy for volumes (boolean value) #zadara_vol_encrypt = false # VPSA - Default template for VPSA volume names (string value) #zadara_vol_name_template = OS_%s # VPSA - Attach snapshot policy for volumes (boolean value) #zadara_default_snap_policy = false # Storage pool name. (string value) #zfssa_pool = # Project name. (string value) #zfssa_project = # Block size. (string value) # Allowed values: 512, 1k, 2k, 4k, 8k, 16k, 32k, 64k, 128k #zfssa_lun_volblocksize = 8k # Flag to enable sparse (thin-provisioned): True, False. (boolean value) #zfssa_lun_sparse = false # Data compression. (string value) # Allowed values: off, lzjb, gzip-2, gzip, gzip-9 #zfssa_lun_compression = off # Synchronous write bias. (string value) # Allowed values: latency, throughput #zfssa_lun_logbias = latency # iSCSI initiator group. (string value) #zfssa_initiator_group = # iSCSI initiator IQNs. (comma separated) (string value) #zfssa_initiator = # iSCSI initiator CHAP user (name). (string value) #zfssa_initiator_user = # Secret of the iSCSI initiator CHAP user. (string value) #zfssa_initiator_password = # iSCSI initiators configuration. (string value) #zfssa_initiator_config = # iSCSI target group name. (string value) #zfssa_target_group = tgt-grp # iSCSI target CHAP user (name). (string value) #zfssa_target_user = # Secret of the iSCSI target CHAP user. (string value) #zfssa_target_password = # iSCSI target portal (Data-IP:Port, w.x.y.z:3260). (string value) #zfssa_target_portal = # Network interfaces of iSCSI targets. (comma separated) (string value) #zfssa_target_interfaces = # REST connection timeout. (seconds) (integer value) #zfssa_rest_timeout = # IP address used for replication data. (maybe the same as data ip) (string # value) #zfssa_replication_ip = # Flag to enable local caching: True, False. (boolean value) #zfssa_enable_local_cache = true # Name of ZFSSA project where cache volumes are stored. (string value) #zfssa_cache_project = os-cinder-cache # Driver policy for volume manage. (string value) # Allowed values: loose, strict #zfssa_manage_policy = loose # Data path IP address (string value) #zfssa_data_ip = # HTTPS port number (string value) #zfssa_https_port = 443 # Options to be passed while mounting share over nfs (string value) #zfssa_nfs_mount_options = # Storage pool name. (string value) #zfssa_nfs_pool = # Project name. (string value) #zfssa_nfs_project = NFSProject # Share name. (string value) #zfssa_nfs_share = nfs_share # Data compression. (string value) # Allowed values: off, lzjb, gzip-2, gzip, gzip-9 #zfssa_nfs_share_compression = off # Synchronous write bias-latency, throughput. (string value) # Allowed values: latency, throughput #zfssa_nfs_share_logbias = latency # Name of directory inside zfssa_nfs_share where cache volumes are stored. # (string value) #zfssa_cache_directory = os-cinder-cache # Main controller IP. (IP address value) #zteControllerIP0 = # Slave controller IP. (IP address value) #zteControllerIP1 = # Local IP. (IP address value) #zteLocalIP = # User name. (string value) #zteUserName = # User password. (string value) #zteUserPassword = # Virtual block size of pool. Unit : KB. Valid value : 4, 8, 16, 32, 64, 128, # 256, 512. (integer value) #zteChunkSize = 4 # Cache readahead size. (integer value) #zteAheadReadSize = 8 # Cache policy. 0, Write Back; 1, Write Through. (integer value) #zteCachePolicy = 1 # SSD cache switch. 0, OFF; 1, ON. (integer value) #zteSSDCacheSwitch = 1 # Pool name list. (list value) #zteStoragePool = # Pool volume allocated policy. 0, Auto; 1, High Performance Tier First; 2, # Performance Tier First; 3, Capacity Tier First. (integer value) #ztePoolVoAllocatedPolicy = 0 # Pool volume move policy.0, Auto; 1, Highest Available; 2, Lowest Available; # 3, No Relocation. (integer value) #ztePoolVolMovePolicy = 0 # Whether it is a thin volume. (integer value) #ztePoolVolIsThin = False # Pool volume init allocated Capacity.Unit : KB. (integer value) #ztePoolVolInitAllocatedCapacity = 0 # Pool volume alarm threshold. [0, 100] (integer value) #ztePoolVolAlarmThreshold = 0 # Pool volume alarm stop allocated flag. (integer value) #ztePoolVolAlarmStopAllocatedFlag = 0 # Driver to use for volume creation (string value) #volume_driver = cinder.volume.drivers.lvm.LVMVolumeDriver # Timeout for creating the volume to migrate to when performing volume # migration (seconds) (integer value) #migration_create_volume_timeout_secs = 300 # Offload pending volume delete during volume service startup (boolean value) #volume_service_inithost_offload = false # FC Zoning mode configured (string value) #zoning_mode = # User defined capabilities, a JSON formatted string specifying key/value # pairs. The key/value pairs can be used by the CapabilitiesFilter to select # between backends when requests specify volume types. For example, specifying # a service level or the geographical location of a backend, then creating a # volume type to allow the user to select by these different properties. # (string value) #extra_capabilities = {} # Suppress requests library SSL certificate warnings. (boolean value) #suppress_requests_ssl_warnings = false # Sets the value of TCP_KEEPALIVE (True/False) for each server socket. (boolean # value) #tcp_keepalive = true # Sets the value of TCP_KEEPINTVL in seconds for each server socket. Not # supported on OS X. (integer value) #tcp_keepalive_interval = # Sets the value of TCP_KEEPCNT for each server socket. Not supported on OS X. # (integer value) #tcp_keepalive_count = # # From oslo.config # # Path to a config file to use. Multiple config files can be specified, with # values in later files taking precedence. Defaults to %(default)s. (unknown # value) #config_file = ~/.project/project.conf,~/project.conf,/etc/project/project.conf,/etc/project.conf # Path to a config directory to pull *.conf files from. This file set is # sorted, so as to provide a predictable parse order if individual options are # over-ridden. The set is parsed after the file(s) specified via previous # --config-file, arguments hence over-ridden options in the directory take # precedence. (list value) #config_dir = ~/.project/project.conf.d/,~/project.conf.d/,/etc/project/project.conf.d/,/etc/project.conf.d/ # # From oslo.log # # If set to true, the logging level will be set to DEBUG instead of the default # INFO level. (boolean value) # Note: This option can be changed without restarting. #debug = false # DEPRECATED: If set to false, the logging level will be set to WARNING instead # of the default INFO level. (boolean value) # This option is deprecated for removal. # Its value may be silently ignored in the future. #verbose = true # The name of a logging configuration file. This file is appended to any # existing logging configuration files. For details about logging configuration # files, see the Python logging module documentation. Note that when logging # configuration files are used then all logging configuration is set in the # configuration file and other logging configuration options are ignored (for # example, logging_context_format_string). (string value) # Note: This option can be changed without restarting. # Deprecated group/name - [DEFAULT]/log_config #log_config_append = # Defines the format string for %%(asctime)s in log records. Default: # %(default)s . This option is ignored if log_config_append is set. (string # value) #log_date_format = %Y-%m-%d %H:%M:%S # (Optional) Name of log file to send logging output to. If no default is set, # logging will go to stderr as defined by use_stderr. This option is ignored if # log_config_append is set. (string value) # Deprecated group/name - [DEFAULT]/logfile #log_file = # (Optional) The base directory used for relative log_file paths. This option # is ignored if log_config_append is set. (string value) # Deprecated group/name - [DEFAULT]/logdir #log_dir = # Uses logging handler designed to watch file system. When log file is moved or # removed this handler will open a new log file with specified path # instantaneously. It makes sense only if log_file option is specified and # Linux platform is used. This option is ignored if log_config_append is set. # (boolean value) #watch_log_file = false # Use syslog for logging. Existing syslog format is DEPRECATED and will be # changed later to honor RFC5424. This option is ignored if log_config_append # is set. (boolean value) #use_syslog = false # Syslog facility to receive log lines. This option is ignored if # log_config_append is set. (string value) #syslog_log_facility = LOG_USER # Log output to standard error. This option is ignored if log_config_append is # set. (boolean value) #use_stderr = false # Format string to use for log messages with context. (string value) #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s # Format string to use for log messages when context is undefined. (string # value) #logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s # Additional data to append to log message when logging level for the message # is DEBUG. (string value) #logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d # Prefix each line of exception output with this format. (string value) #logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s # Defines the format string for %(user_identity)s that is used in # logging_context_format_string. (string value) #logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s # List of package logging levels in logger=LEVEL pairs. This option is ignored # if log_config_append is set. (list value) #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO # Enables or disables publication of error events. (boolean value) #publish_errors = false # The format for an instance that is passed with the log message. (string # value) #instance_format = "[instance: %(uuid)s] " # The format for an instance UUID that is passed with the log message. (string # value) #instance_uuid_format = "[instance: %(uuid)s] " # Interval, number of seconds, of log rate limiting. (integer value) #rate_limit_interval = 0 # Maximum number of logged messages per rate_limit_interval. (integer value) #rate_limit_burst = 0 # Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG # or empty string. Logs with level greater or equal to rate_limit_except_level # are not filtered. An empty string means that all levels are filtered. (string # value) #rate_limit_except_level = CRITICAL # Enables or disables fatal status of deprecations. (boolean value) #fatal_deprecations = false # # From oslo.messaging # # Size of RPC connection pool. (integer value) # Deprecated group/name - [DEFAULT]/rpc_conn_pool_size #rpc_conn_pool_size = 30 # The pool size limit for connections expiration policy (integer value) #conn_pool_min_size = 2 # The time-to-live in sec of idle connections in the pool (integer value) #conn_pool_ttl = 1200 # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. # The "host" option should point or resolve to this address. (string value) # Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address #rpc_zmq_bind_address = * # MatchMaker driver. (string value) # Allowed values: redis, sentinel, dummy # Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker #rpc_zmq_matchmaker = redis # Number of ZeroMQ contexts, defaults to 1. (integer value) # Deprecated group/name - [DEFAULT]/rpc_zmq_contexts #rpc_zmq_contexts = 1 # Maximum number of ingress messages to locally buffer per topic. Default is # unlimited. (integer value) # Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog #rpc_zmq_topic_backlog = # Directory for holding IPC sockets. (string value) # Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir #rpc_zmq_ipc_dir = /var/run/openstack # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match # "host" option, if running Nova. (string value) # Deprecated group/name - [DEFAULT]/rpc_zmq_host #rpc_zmq_host = localhost # Number of seconds to wait before all pending messages will be sent after # closing a socket. The default value of -1 specifies an infinite linger # period. The value of 0 specifies no linger period. Pending messages shall be # discarded immediately when the socket is closed. Positive values specify an # upper bound for the linger period. (integer value) # Deprecated group/name - [DEFAULT]/rpc_cast_timeout #zmq_linger = -1 # The default number of seconds that poll should wait. Poll raises timeout # exception when timeout expired. (integer value) # Deprecated group/name - [DEFAULT]/rpc_poll_timeout #rpc_poll_timeout = 1 # Expiration timeout in seconds of a name service record about existing target # ( < 0 means no timeout). (integer value) # Deprecated group/name - [DEFAULT]/zmq_target_expire #zmq_target_expire = 300 # Update period in seconds of a name service record about existing target. # (integer value) # Deprecated group/name - [DEFAULT]/zmq_target_update #zmq_target_update = 180 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean # value) # Deprecated group/name - [DEFAULT]/use_pub_sub #use_pub_sub = false # Use ROUTER remote proxy. (boolean value) # Deprecated group/name - [DEFAULT]/use_router_proxy #use_router_proxy = false # This option makes direct connections dynamic or static. It makes sense only # with use_router_proxy=False which means to use direct connections for direct # message types (ignored otherwise). (boolean value) #use_dynamic_connections = false # How many additional connections to a host will be made for failover reasons. # This option is actual only in dynamic connections mode. (integer value) #zmq_failover_connections = 2 # Minimal port number for random ports range. (port value) # Minimum value: 0 # Maximum value: 65535 # Deprecated group/name - [DEFAULT]/rpc_zmq_min_port #rpc_zmq_min_port = 49153 # Maximal port number for random ports range. (integer value) # Minimum value: 1 # Maximum value: 65536 # Deprecated group/name - [DEFAULT]/rpc_zmq_max_port #rpc_zmq_max_port = 65536 # Number of retries to find free port number before fail with ZMQBindError. # (integer value) # Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries #rpc_zmq_bind_port_retries = 100 # Default serialization mechanism for serializing/deserializing # outgoing/incoming messages (string value) # Allowed values: json, msgpack # Deprecated group/name - [DEFAULT]/rpc_zmq_serialization #rpc_zmq_serialization = json # This option configures round-robin mode in zmq socket. True means not keeping # a queue when server side disconnects. False means to keep queue and messages # even if server is disconnected, when the server appears we send all # accumulated messages to it. (boolean value) #zmq_immediate = true # Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any # other negative value) means to skip any overrides and leave it to OS default; # 0 and 1 (or any other positive value) mean to disable and enable the option # respectively. (integer value) #zmq_tcp_keepalive = -1 # The duration between two keepalive transmissions in idle condition. The unit # is platform dependent, for example, seconds in Linux, milliseconds in Windows # etc. The default value of -1 (or any other negative value and 0) means to # skip any overrides and leave it to OS default. (integer value) #zmq_tcp_keepalive_idle = -1 # The number of retransmissions to be carried out before declaring that remote # end is not available. The default value of -1 (or any other negative value # and 0) means to skip any overrides and leave it to OS default. (integer # value) #zmq_tcp_keepalive_cnt = -1 # The duration between two successive keepalive retransmissions, if # acknowledgement to the previous keepalive transmission is not received. The # unit is platform dependent, for example, seconds in Linux, milliseconds in # Windows etc. The default value of -1 (or any other negative value and 0) # means to skip any overrides and leave it to OS default. (integer value) #zmq_tcp_keepalive_intvl = -1 # Maximum number of (green) threads to work concurrently. (integer value) #rpc_thread_pool_size = 100 # Expiration timeout in seconds of a sent/received message after which it is # not tracked anymore by a client/server. (integer value) #rpc_message_ttl = 300 # Wait for message acknowledgements from receivers. This mechanism works only # via proxy without PUB/SUB. (boolean value) #rpc_use_acks = false # Number of seconds to wait for an ack from a cast/call. After each retry # attempt this timeout is multiplied by some specified multiplier. (integer # value) #rpc_ack_timeout_base = 15 # Number to multiply base ack timeout by after each retry attempt. (integer # value) #rpc_ack_timeout_multiplier = 2 # Default number of message sending attempts in case of any problems occurred: # positive value N means at most N retries, 0 means no retries, None or -1 (or # any other negative values) mean to retry forever. This option is used only if # acknowledgments are enabled. (integer value) #rpc_retry_attempts = 3 # List of publisher hosts SubConsumer can subscribe on. This option has higher # priority then the default publishers list taken from the matchmaker. (list # value) #subscribe_on = # Size of executor thread pool. (integer value) # Deprecated group/name - [DEFAULT]/rpc_thread_pool_size #executor_thread_pool_size = 64 # Seconds to wait for a response from a call. (integer value) #rpc_response_timeout = 60 # A URL representing the messaging driver to use and its full configuration. # (string value) #transport_url = # DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers # include amqp and zmq. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rpc_backend = rabbit # The default exchange under which topics are scoped. May be overridden by an # exchange name specified in the transport_url option. (string value) #control_exchange = openstack # # From oslo.service.periodic_task # # Some periodic tasks can be run in a separate process. Should we run them # here? (boolean value) #run_external_periodic_tasks = true # # From oslo.service.service # # Enable eventlet backdoor. Acceptable values are 0, , and # :, where 0 results in listening on a random tcp port number; # results in listening on the specified port number (and not enabling # backdoor if that port is in use); and : results in listening on # the smallest unused port number within the specified range of port numbers. # The chosen port is displayed in the service's log file. (string value) #backdoor_port = # Enable eventlet backdoor, using the provided path as a unix socket that can # receive connections. This option is mutually exclusive with 'backdoor_port' # in that only one should be provided. If both are provided then the existence # of this option overrides the usage of that option. (string value) #backdoor_socket = # Enables or disables logging values of all registered options when starting a # service (at DEBUG level). (boolean value) #log_options = true # Specify a timeout after which a gracefully shutdown server will exit. Zero # value means endless wait. (integer value) #graceful_shutdown_timeout = 60 # # From oslo.service.wsgi # # File name for the paste.deploy config for api service (string value) #api_paste_config = api-paste.ini # A python format string that is used as the template to generate log lines. # The following values can beformatted into it: client_ip, date_time, # request_line, status_code, body_length, wall_seconds. (string value) #wsgi_log_format = %(client_ip)s "%(request_line)s" status: %(status_code)s len: %(body_length)s time: %(wall_seconds).7f # Sets the value of TCP_KEEPIDLE in seconds for each server socket. Not # supported on OS X. (integer value) #tcp_keepidle = 600 # Size of the pool of greenthreads used by wsgi (integer value) #wsgi_default_pool_size = 100 # Maximum line size of message headers to be accepted. max_header_line may need # to be increased when using large tokens (typically those generated when # keystone is configured to use PKI tokens with big service catalogs). (integer # value) #max_header_line = 16384 # If False, closes the client socket connection explicitly. (boolean value) #wsgi_keep_alive = true # Timeout for client connections' socket operations. If an incoming connection # is idle for this number of seconds it will be closed. A value of '0' means # wait forever. (integer value) #client_socket_timeout = 900 [backend] # # From cinder # # Backend override of host value. (string value) # Deprecated group/name - [backend]/host #backend_host = [barbican] # # From castellan.config # # Use this endpoint to connect to Barbican, for example: # "http://localhost:9311/" (string value) #barbican_endpoint = # Version of the Barbican API, for example: "v1" (string value) #barbican_api_version = # Use this endpoint to connect to Keystone (string value) #auth_endpoint = http://localhost:5000/v3 # Number of seconds to wait before retrying poll for key creation completion # (integer value) #retry_delay = 1 # Number of times to retry poll for key creation completion (integer value) #number_of_retries = 60 [brcd_fabric_example] # # From cinder # # South bound connector for the fabric. (string value) # Allowed values: SSH, HTTP, HTTPS #fc_southbound_protocol = HTTP # Management IP of fabric. (string value) #fc_fabric_address = # Fabric user ID. (string value) #fc_fabric_user = # Password for user. (string value) #fc_fabric_password = # Connecting port (port value) # Minimum value: 0 # Maximum value: 65535 #fc_fabric_port = 22 # Local SSH certificate Path. (string value) #fc_fabric_ssh_cert_path = # Overridden zoning policy. (string value) #zoning_policy = initiator-target # Overridden zoning activation state. (boolean value) #zone_activate = true # Overridden zone name prefix. (string value) #zone_name_prefix = openstack # Virtual Fabric ID. (string value) #fc_virtual_fabric_id = # DEPRECATED: Principal switch WWN of the fabric. This option is not used # anymore. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. #principal_switch_wwn = [cisco_fabric_example] # # From cinder # # Management IP of fabric (string value) #cisco_fc_fabric_address = # Fabric user ID (string value) #cisco_fc_fabric_user = # Password for user (string value) #cisco_fc_fabric_password = # Connecting port (port value) # Minimum value: 0 # Maximum value: 65535 #cisco_fc_fabric_port = 22 # overridden zoning policy (string value) #cisco_zoning_policy = initiator-target # overridden zoning activation state (boolean value) #cisco_zone_activate = true # overridden zone name prefix (string value) #cisco_zone_name_prefix = # VSAN of the Fabric (string value) #cisco_zoning_vsan = [coordination] # # From cinder # # The backend URL to use for distributed coordination. (string value) #backend_url = file://$state_path # Number of seconds between heartbeats for distributed coordination. (floating # point value) #heartbeat = 1.0 # Initial number of seconds to wait after failed reconnection. (floating point # value) #initial_reconnect_backoff = 0.1 # Maximum number of seconds between sequential reconnection retries. (floating # point value) #max_reconnect_backoff = 60.0 [cors] # # From oslo.middleware # # Indicate whether this resource may be shared with the domain received in the # requests "origin" header. Format: "://[:]", no trailing # slash. Example: https://horizon.example.com (list value) #allowed_origin = # Indicate that the actual request can include user credentials (boolean value) #allow_credentials = true # Indicate which headers are safe to expose to the API. Defaults to HTTP Simple # Headers. (list value) #expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-API-Version # Maximum cache age of CORS preflight requests. (integer value) #max_age = 3600 # Indicate which methods can be used during the actual request. (list value) #allow_methods = GET,PUT,POST,DELETE,PATCH,HEAD # Indicate which header field names may be used during the actual request. # (list value) #allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID,X-Trace-Info,X-Trace-HMAC,OpenStack-API-Version [cors.subdomain] # # From oslo.middleware # # Indicate whether this resource may be shared with the domain received in the # requests "origin" header. Format: "://[:]", no trailing # slash. Example: https://horizon.example.com (list value) #allowed_origin = # Indicate that the actual request can include user credentials (boolean value) #allow_credentials = true # Indicate which headers are safe to expose to the API. Defaults to HTTP Simple # Headers. (list value) #expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID,OpenStack-API-Version # Maximum cache age of CORS preflight requests. (integer value) #max_age = 3600 # Indicate which methods can be used during the actual request. (list value) #allow_methods = GET,PUT,POST,DELETE,PATCH,HEAD # Indicate which header field names may be used during the actual request. # (list value) #allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID,X-Trace-Info,X-Trace-HMAC,OpenStack-API-Version [database] # # From oslo.db # # DEPRECATED: The file name to use with SQLite. (string value) # Deprecated group/name - [DEFAULT]/sqlite_db # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Should use config option connection or slave_connection to connect # the database. #sqlite_db = oslo.sqlite # If True, SQLite uses synchronous mode. (boolean value) # Deprecated group/name - [DEFAULT]/sqlite_synchronous #sqlite_synchronous = true # The back end to use for the database. (string value) # Deprecated group/name - [DEFAULT]/db_backend #backend = sqlalchemy # The SQLAlchemy connection string to use to connect to the database. (string # value) # Deprecated group/name - [DEFAULT]/sql_connection # Deprecated group/name - [DATABASE]/sql_connection # Deprecated group/name - [sql]/connection #connection = # The SQLAlchemy connection string to use to connect to the slave database. # (string value) #slave_connection = # The SQL mode to be used for MySQL sessions. This option, including the # default, overrides any server-set SQL mode. To use whatever SQL mode is set # by the server configuration, set this to no value. Example: mysql_sql_mode= # (string value) #mysql_sql_mode = TRADITIONAL # Timeout before idle SQL connections are reaped. (integer value) # Deprecated group/name - [DEFAULT]/sql_idle_timeout # Deprecated group/name - [DATABASE]/sql_idle_timeout # Deprecated group/name - [sql]/idle_timeout #idle_timeout = 3600 # Minimum number of SQL connections to keep open in a pool. (integer value) # Deprecated group/name - [DEFAULT]/sql_min_pool_size # Deprecated group/name - [DATABASE]/sql_min_pool_size #min_pool_size = 1 # Maximum number of SQL connections to keep open in a pool. Setting a value of # 0 indicates no limit. (integer value) # Deprecated group/name - [DEFAULT]/sql_max_pool_size # Deprecated group/name - [DATABASE]/sql_max_pool_size #max_pool_size = 5 # Maximum number of database connection retries during startup. Set to -1 to # specify an infinite retry count. (integer value) # Deprecated group/name - [DEFAULT]/sql_max_retries # Deprecated group/name - [DATABASE]/sql_max_retries #max_retries = 10 # Interval between retries of opening a SQL connection. (integer value) # Deprecated group/name - [DEFAULT]/sql_retry_interval # Deprecated group/name - [DATABASE]/reconnect_interval #retry_interval = 10 # If set, use this value for max_overflow with SQLAlchemy. (integer value) # Deprecated group/name - [DEFAULT]/sql_max_overflow # Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow #max_overflow = 50 # Verbosity of SQL debugging information: 0=None, 100=Everything. (integer # value) # Minimum value: 0 # Maximum value: 100 # Deprecated group/name - [DEFAULT]/sql_connection_debug #connection_debug = 0 # Add Python stack traces to SQL as comment strings. (boolean value) # Deprecated group/name - [DEFAULT]/sql_connection_trace #connection_trace = false # If set, use this value for pool_timeout with SQLAlchemy. (integer value) # Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout #pool_timeout = # Enable the experimental use of database reconnect on connection lost. # (boolean value) #use_db_reconnect = false # Seconds between retries of a database transaction. (integer value) #db_retry_interval = 1 # If True, increases the interval between retries of a database operation up to # db_max_retry_interval. (boolean value) #db_inc_retry_interval = true # If db_inc_retry_interval is set, the maximum seconds between retries of a # database operation. (integer value) #db_max_retry_interval = 10 # Maximum retries in case of connection error or deadlock error before error is # raised. Set to -1 to specify an infinite retry count. (integer value) #db_max_retries = 20 [fc-zone-manager] # # From cinder # # South bound connector for zoning operation (string value) #brcd_sb_connector = HTTP # Southbound connector for zoning operation (string value) #cisco_sb_connector = cinder.zonemanager.drivers.cisco.cisco_fc_zone_client_cli.CiscoFCZoneClientCLI # FC Zone Driver responsible for zone management (string value) #zone_driver = cinder.zonemanager.drivers.brocade.brcd_fc_zone_driver.BrcdFCZoneDriver # Zoning policy configured by user; valid values include "initiator-target" or # "initiator" (string value) #zoning_policy = initiator-target # Comma separated list of Fibre Channel fabric names. This list of names is # used to retrieve other SAN credentials for connecting to each SAN fabric # (string value) #fc_fabric_names = # FC SAN Lookup Service (string value) #fc_san_lookup_service = cinder.zonemanager.drivers.brocade.brcd_fc_san_lookup_service.BrcdFCSanLookupService # Set this to True when you want to allow an unsupported zone manager driver to # start. Drivers that haven't maintained a working CI system and testing are # marked as unsupported until CI is working again. This also marks a driver as # deprecated and may be removed in the next release. (boolean value) #enable_unsupported_driver = false [healthcheck] # # From oslo.middleware # # DEPRECATED: The path to respond to healtcheck requests on. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. #path = /healthcheck # Show more detailed information as part of the response (boolean value) #detailed = false # Additional backends that can perform health checks and report that # information back as part of a request. (list value) #backends = # Check the presence of a file to determine if an application is running on a # port. Used by DisableByFileHealthcheck plugin. (string value) #disable_by_file_path = # Check the presence of a file based on a port to determine if an application # is running on a port. Expects a "port:path" list of strings. Used by # DisableByFilesPortsHealthcheck plugin. (list value) #disable_by_file_paths = [key_manager] # # From castellan.config # # The full class name of the key manager API class (string value) #api_class = castellan.key_manager.barbican_key_manager.BarbicanKeyManager # The type of authentication credential to create. Possible values are 'token', # 'password', 'keystone_token', and 'keystone_password'. Required if no context # is passed to the credential factory. (string value) #auth_type = # Token for authentication. Required for 'token' and 'keystone_token' auth_type # if no context is passed to the credential factory. (string value) #token = # Username for authentication. Required for 'password' auth_type. Optional for # the 'keystone_password' auth_type. (string value) #username = # Password for authentication. Required for 'password' and 'keystone_password' # auth_type. (string value) #password = # User ID for authentication. Optional for 'keystone_token' and # 'keystone_password' auth_type. (string value) #user_id = # User's domain ID for authentication. Optional for 'keystone_token' and # 'keystone_password' auth_type. (string value) #user_domain_id = # User's domain name for authentication. Optional for 'keystone_token' and # 'keystone_password' auth_type. (string value) #user_domain_name = # Trust ID for trust scoping. Optional for 'keystone_token' and # 'keystone_password' auth_type. (string value) #trust_id = # Domain ID for domain scoping. Optional for 'keystone_token' and # 'keystone_password' auth_type. (string value) #domain_id = # Domain name for domain scoping. Optional for 'keystone_token' and # 'keystone_password' auth_type. (string value) #domain_name = # Project ID for project scoping. Optional for 'keystone_token' and # 'keystone_password' auth_type. (string value) #project_id = # Project name for project scoping. Optional for 'keystone_token' and # 'keystone_password' auth_type. (string value) #project_name = # Project's domain ID for project. Optional for 'keystone_token' and # 'keystone_password' auth_type. (string value) #project_domain_id = # Project's domain name for project. Optional for 'keystone_token' and # 'keystone_password' auth_type. (string value) #project_domain_name = # Allow fetching a new token if the current one is going to expire. Optional # for 'keystone_token' and 'keystone_password' auth_type. (boolean value) #reauthenticate = true # # From cinder # # Fixed key returned by key manager, specified in hex (string value) # Deprecated group/name - [keymgr]/fixed_key #fixed_key = [keystone_authtoken] # # From keystonemiddleware.auth_token # # Complete "public" Identity API endpoint. This endpoint should not be an # "admin" endpoint, as it should be accessible by all end users. # Unauthenticated clients are redirected to this endpoint to authenticate. # Although this endpoint should ideally be unversioned, client support in the # wild varies. If you're using a versioned v2 endpoint here, then this should # *not* be the same endpoint the service user utilizes for validating tokens, # because normal end users may not be able to reach that endpoint. (string # value) #auth_uri = # API version of the admin Identity API endpoint. (string value) #auth_version = # Do not handle authorization requests within the middleware, but delegate the # authorization decision to downstream WSGI components. (boolean value) #delay_auth_decision = false # Request timeout value for communicating with Identity API server. (integer # value) #http_connect_timeout = # How many times are we trying to reconnect when communicating with Identity # API Server. (integer value) #http_request_max_retries = 3 # Request environment key where the Swift cache object is stored. When # auth_token middleware is deployed with a Swift cache, use this option to have # the middleware share a caching backend with swift. Otherwise, use the # ``memcached_servers`` option instead. (string value) #cache = # Required if identity server requires client certificate (string value) #certfile = # Required if identity server requires client certificate (string value) #keyfile = # A PEM encoded Certificate Authority to use when verifying HTTPs connections. # Defaults to system CAs. (string value) #cafile = # Verify HTTPS connections. (boolean value) #insecure = false # The region in which the identity server can be found. (string value) #region_name = # DEPRECATED: Directory used to cache files related to PKI tokens. This option # has been deprecated in the Ocata release and will be removed in the P # release. (string value) # This option is deprecated for removal since Ocata. # Its value may be silently ignored in the future. # Reason: PKI token format is no longer supported. #signing_dir = # Optionally specify a list of memcached server(s) to use for caching. If left # undefined, tokens will instead be cached in-process. (list value) # Deprecated group/name - [keystone_authtoken]/memcache_servers #memcached_servers = # In order to prevent excessive effort spent validating tokens, the middleware # caches previously-seen tokens for a configurable duration (in seconds). Set # to -1 to disable caching completely. (integer value) #token_cache_time = 300 # DEPRECATED: Determines the frequency at which the list of revoked tokens is # retrieved from the Identity service (in seconds). A high number of revocation # events combined with a low cache duration may significantly reduce # performance. Only valid for PKI tokens. This option has been deprecated in # the Ocata release and will be removed in the P release. (integer value) # This option is deprecated for removal since Ocata. # Its value may be silently ignored in the future. # Reason: PKI token format is no longer supported. #revocation_cache_time = 10 # (Optional) If defined, indicate whether token data should be authenticated or # authenticated and encrypted. If MAC, token data is authenticated (with HMAC) # in the cache. If ENCRYPT, token data is encrypted and authenticated in the # cache. If the value is not one of these options or empty, auth_token will # raise an exception on initialization. (string value) # Allowed values: None, MAC, ENCRYPT #memcache_security_strategy = None # (Optional, mandatory if memcache_security_strategy is defined) This string is # used for key derivation. (string value) #memcache_secret_key = # (Optional) Number of seconds memcached server is considered dead before it is # tried again. (integer value) #memcache_pool_dead_retry = 300 # (Optional) Maximum total number of open connections to every memcached # server. (integer value) #memcache_pool_maxsize = 10 # (Optional) Socket timeout in seconds for communicating with a memcached # server. (integer value) #memcache_pool_socket_timeout = 3 # (Optional) Number of seconds a connection to memcached is held unused in the # pool before it is closed. (integer value) #memcache_pool_unused_timeout = 60 # (Optional) Number of seconds that an operation will wait to get a memcached # client connection from the pool. (integer value) #memcache_pool_conn_get_timeout = 10 # (Optional) Use the advanced (eventlet safe) memcached client pool. The # advanced pool will only work under python 2.x. (boolean value) #memcache_use_advanced_pool = false # (Optional) Indicate whether to set the X-Service-Catalog header. If False, # middleware will not ask for service catalog on token validation and will not # set the X-Service-Catalog header. (boolean value) #include_service_catalog = true # Used to control the use and type of token binding. Can be set to: "disabled" # to not check token binding. "permissive" (default) to validate binding # information if the bind type is of a form known to the server and ignore it # if not. "strict" like "permissive" but if the bind type is unknown the token # will be rejected. "required" any form of token binding is needed to be # allowed. Finally the name of a binding method that must be present in tokens. # (string value) #enforce_token_bind = permissive # DEPRECATED: If true, the revocation list will be checked for cached tokens. # This requires that PKI tokens are configured on the identity server. (boolean # value) # This option is deprecated for removal since Ocata. # Its value may be silently ignored in the future. # Reason: PKI token format is no longer supported. #check_revocations_for_cached = false # DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a # single algorithm or multiple. The algorithms are those supported by Python # standard hashlib.new(). The hashes will be tried in the order given, so put # the preferred one first for performance. The result of the first hash will be # stored in the cache. This will typically be set to multiple values only while # migrating from a less secure algorithm to a more secure one. Once all the old # tokens are expired this option should be set to a single value for better # performance. (list value) # This option is deprecated for removal since Ocata. # Its value may be silently ignored in the future. # Reason: PKI token format is no longer supported. #hash_algorithms = md5 # A choice of roles that must be present in a service token. Service tokens are # allowed to request that an expired token can be used and so this check should # tightly control that only actual services should be sending this token. Roles # here are applied as an ANY check so any role in this list must be present. # For backwards compatibility reasons this currently only affects the # allow_expired check. (list value) #service_token_roles = service # For backwards compatibility reasons we must let valid service tokens pass # that don't pass the service_token_roles check as valid. Setting this true # will become the default in a future release and should be enabled if # possible. (boolean value) #service_token_roles_required = false # Authentication type to load (string value) # Deprecated group/name - [keystone_authtoken]/auth_plugin #auth_type = # Config Section from which to load plugin specific options (string value) #auth_section = [matchmaker_redis] # # From oslo.messaging # # DEPRECATED: Host to locate redis. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #host = 127.0.0.1 # DEPRECATED: Use this port to connect to redis host. (port value) # Minimum value: 0 # Maximum value: 65535 # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #port = 6379 # DEPRECATED: Password for Redis server (optional). (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #password = # DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g., # [host:port, host1:port ... ] (list value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #sentinel_hosts = # Redis replica set name. (string value) #sentinel_group_name = oslo-messaging-zeromq # Time in ms to wait between connection attempts. (integer value) #wait_timeout = 2000 # Time in ms to wait before the transaction is killed. (integer value) #check_timeout = 20000 # Timeout in ms on blocking socket operations. (integer value) #socket_timeout = 10000 [oslo_concurrency] # # From oslo.concurrency # # Enables or disables inter-process locks. (boolean value) # Deprecated group/name - [DEFAULT]/disable_process_locking #disable_process_locking = false # Directory to use for lock files. For security, the specified directory # should only be writable by the user running the processes that need locking. # Defaults to environment variable OSLO_LOCK_PATH. If external locks are used, # a lock path must be set. (string value) # Deprecated group/name - [DEFAULT]/lock_path #lock_path = [oslo_messaging_amqp] # # From oslo.messaging # # Name for the AMQP container. must be globally unique. Defaults to a generated # UUID (string value) # Deprecated group/name - [amqp1]/container_name #container_name = # Timeout for inactive connections (in seconds) (integer value) # Deprecated group/name - [amqp1]/idle_timeout #idle_timeout = 0 # Debug: dump AMQP frames to stdout (boolean value) # Deprecated group/name - [amqp1]/trace #trace = false # CA certificate PEM file used to verify the server's certificate (string # value) # Deprecated group/name - [amqp1]/ssl_ca_file #ssl_ca_file = # Self-identifying certificate PEM file for client authentication (string # value) # Deprecated group/name - [amqp1]/ssl_cert_file #ssl_cert_file = # Private key PEM file used to sign ssl_cert_file certificate (optional) # (string value) # Deprecated group/name - [amqp1]/ssl_key_file #ssl_key_file = # Password for decrypting ssl_key_file (if encrypted) (string value) # Deprecated group/name - [amqp1]/ssl_key_password #ssl_key_password = # DEPRECATED: Accept clients using either SSL or plain TCP (boolean value) # Deprecated group/name - [amqp1]/allow_insecure_clients # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Not applicable - not a SSL server #allow_insecure_clients = false # Space separated list of acceptable SASL mechanisms (string value) # Deprecated group/name - [amqp1]/sasl_mechanisms #sasl_mechanisms = # Path to directory that contains the SASL configuration (string value) # Deprecated group/name - [amqp1]/sasl_config_dir #sasl_config_dir = # Name of configuration file (without .conf suffix) (string value) # Deprecated group/name - [amqp1]/sasl_config_name #sasl_config_name = # User name for message broker authentication (string value) # Deprecated group/name - [amqp1]/username #username = # Password for message broker authentication (string value) # Deprecated group/name - [amqp1]/password #password = # Seconds to pause before attempting to re-connect. (integer value) # Minimum value: 1 #connection_retry_interval = 1 # Increase the connection_retry_interval by this many seconds after each # unsuccessful failover attempt. (integer value) # Minimum value: 0 #connection_retry_backoff = 2 # Maximum limit for connection_retry_interval + connection_retry_backoff # (integer value) # Minimum value: 1 #connection_retry_interval_max = 30 # Time to pause between re-connecting an AMQP 1.0 link that failed due to a # recoverable error. (integer value) # Minimum value: 1 #link_retry_delay = 10 # The maximum number of attempts to re-send a reply message which failed due to # a recoverable error. (integer value) # Minimum value: -1 #default_reply_retry = 0 # The deadline for an rpc reply message delivery. (integer value) # Minimum value: 5 #default_reply_timeout = 30 # The deadline for an rpc cast or call message delivery. Only used when caller # does not provide a timeout expiry. (integer value) # Minimum value: 5 #default_send_timeout = 30 # The deadline for a sent notification message delivery. Only used when caller # does not provide a timeout expiry. (integer value) # Minimum value: 5 #default_notify_timeout = 30 # The duration to schedule a purge of idle sender links. Detach link after # expiry. (integer value) # Minimum value: 1 #default_sender_link_timeout = 600 # Indicates the addressing mode used by the driver. # Permitted values: # 'legacy' - use legacy non-routable addressing # 'routable' - use routable addresses # 'dynamic' - use legacy addresses if the message bus does not support routing # otherwise use routable addressing (string value) #addressing_mode = dynamic # address prefix used when sending to a specific server (string value) # Deprecated group/name - [amqp1]/server_request_prefix #server_request_prefix = exclusive # address prefix used when broadcasting to all servers (string value) # Deprecated group/name - [amqp1]/broadcast_prefix #broadcast_prefix = broadcast # address prefix when sending to any server in group (string value) # Deprecated group/name - [amqp1]/group_request_prefix #group_request_prefix = unicast # Address prefix for all generated RPC addresses (string value) #rpc_address_prefix = openstack.org/om/rpc # Address prefix for all generated Notification addresses (string value) #notify_address_prefix = openstack.org/om/notify # Appended to the address prefix when sending a fanout message. Used by the # message bus to identify fanout messages. (string value) #multicast_address = multicast # Appended to the address prefix when sending to a particular RPC/Notification # server. Used by the message bus to identify messages sent to a single # destination. (string value) #unicast_address = unicast # Appended to the address prefix when sending to a group of consumers. Used by # the message bus to identify messages that should be delivered in a round- # robin fashion across consumers. (string value) #anycast_address = anycast # Exchange name used in notification addresses. # Exchange name resolution precedence: # Target.exchange if set # else default_notification_exchange if set # else control_exchange if set # else 'notify' (string value) #default_notification_exchange = # Exchange name used in RPC addresses. # Exchange name resolution precedence: # Target.exchange if set # else default_rpc_exchange if set # else control_exchange if set # else 'rpc' (string value) #default_rpc_exchange = # Window size for incoming RPC Reply messages. (integer value) # Minimum value: 1 #reply_link_credit = 200 # Window size for incoming RPC Request messages (integer value) # Minimum value: 1 #rpc_server_credit = 100 # Window size for incoming Notification messages (integer value) # Minimum value: 1 #notify_server_credit = 100 # Send messages of this type pre-settled. # Pre-settled messages will not receive acknowledgement # from the peer. Note well: pre-settled messages may be # silently discarded if the delivery fails. # Permitted values: # 'rpc-call' - send RPC Calls pre-settled # 'rpc-reply'- send RPC Replies pre-settled # 'rpc-cast' - Send RPC Casts pre-settled # 'notify' - Send Notifications pre-settled # (multi valued) #pre_settled = rpc-cast #pre_settled = rpc-reply [oslo_messaging_kafka] # # From oslo.messaging # # DEPRECATED: Default Kafka broker Host (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #kafka_default_host = localhost # DEPRECATED: Default Kafka broker Port (port value) # Minimum value: 0 # Maximum value: 65535 # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #kafka_default_port = 9092 # Max fetch bytes of Kafka consumer (integer value) #kafka_max_fetch_bytes = 1048576 # Default timeout(s) for Kafka consumers (integer value) #kafka_consumer_timeout = 1.0 # Pool Size for Kafka Consumers (integer value) #pool_size = 10 # The pool size limit for connections expiration policy (integer value) #conn_pool_min_size = 2 # The time-to-live in sec of idle connections in the pool (integer value) #conn_pool_ttl = 1200 # Group id for Kafka consumer. Consumers in one group will coordinate message # consumption (string value) #consumer_group = oslo_messaging_consumer # Upper bound on the delay for KafkaProducer batching in seconds (floating # point value) #producer_batch_timeout = 0.0 # Size of batch for the producer async send (integer value) #producer_batch_size = 16384 [oslo_messaging_notifications] # # From oslo.messaging # # The Drivers(s) to handle sending notifications. Possible values are # messaging, messagingv2, routing, log, test, noop (multi valued) # Deprecated group/name - [DEFAULT]/notification_driver #driver = # A URL representing the messaging driver to use for notifications. If not set, # we fall back to the same configuration used for RPC. (string value) # Deprecated group/name - [DEFAULT]/notification_transport_url #transport_url = # AMQP topic used for OpenStack notifications. (list value) # Deprecated group/name - [rpc_notifier2]/topics # Deprecated group/name - [DEFAULT]/notification_topics #topics = notifications [oslo_messaging_rabbit] # # From oslo.messaging # # Use durable queues in AMQP. (boolean value) # Deprecated group/name - [DEFAULT]/amqp_durable_queues # Deprecated group/name - [DEFAULT]/rabbit_durable_queues #amqp_durable_queues = false # Auto-delete queues in AMQP. (boolean value) # Deprecated group/name - [DEFAULT]/amqp_auto_delete #amqp_auto_delete = false # SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and # SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some # distributions. (string value) # Deprecated group/name - [DEFAULT]/kombu_ssl_version #kombu_ssl_version = # SSL key file (valid only if SSL enabled). (string value) # Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile #kombu_ssl_keyfile = # SSL cert file (valid only if SSL enabled). (string value) # Deprecated group/name - [DEFAULT]/kombu_ssl_certfile #kombu_ssl_certfile = # SSL certification authority file (valid only if SSL enabled). (string value) # Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs #kombu_ssl_ca_certs = # How long to wait before reconnecting in response to an AMQP consumer cancel # notification. (floating point value) # Deprecated group/name - [DEFAULT]/kombu_reconnect_delay #kombu_reconnect_delay = 1.0 # EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not # be used. This option may not be available in future versions. (string value) #kombu_compression = # How long to wait a missing client before abandoning to send it its replies. # This value should not be longer than rpc_response_timeout. (integer value) # Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout #kombu_missing_consumer_retry_timeout = 60 # Determines how the next RabbitMQ node is chosen in case the one we are # currently connected to becomes unavailable. Takes effect only if more than # one RabbitMQ node is provided in config. (string value) # Allowed values: round-robin, shuffle #kombu_failover_strategy = round-robin # DEPRECATED: The RabbitMQ broker address where a single node is used. (string # value) # Deprecated group/name - [DEFAULT]/rabbit_host # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rabbit_host = localhost # DEPRECATED: The RabbitMQ broker port where a single node is used. (port # value) # Minimum value: 0 # Maximum value: 65535 # Deprecated group/name - [DEFAULT]/rabbit_port # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rabbit_port = 5672 # DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value) # Deprecated group/name - [DEFAULT]/rabbit_hosts # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rabbit_hosts = $rabbit_host:$rabbit_port # Connect over SSL for RabbitMQ. (boolean value) # Deprecated group/name - [DEFAULT]/rabbit_use_ssl #rabbit_use_ssl = false # DEPRECATED: The RabbitMQ userid. (string value) # Deprecated group/name - [DEFAULT]/rabbit_userid # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rabbit_userid = guest # DEPRECATED: The RabbitMQ password. (string value) # Deprecated group/name - [DEFAULT]/rabbit_password # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rabbit_password = guest # The RabbitMQ login method. (string value) # Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO # Deprecated group/name - [DEFAULT]/rabbit_login_method #rabbit_login_method = AMQPLAIN # DEPRECATED: The RabbitMQ virtual host. (string value) # Deprecated group/name - [DEFAULT]/rabbit_virtual_host # This option is deprecated for removal. # Its value may be silently ignored in the future. # Reason: Replaced by [DEFAULT]/transport_url #rabbit_virtual_host = / # How frequently to retry connecting with RabbitMQ. (integer value) #rabbit_retry_interval = 1 # How long to backoff for between retries when connecting to RabbitMQ. (integer # value) # Deprecated group/name - [DEFAULT]/rabbit_retry_backoff #rabbit_retry_backoff = 2 # Maximum interval of RabbitMQ connection retries. Default is 30 seconds. # (integer value) #rabbit_interval_max = 30 # DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0 # (infinite retry count). (integer value) # Deprecated group/name - [DEFAULT]/rabbit_max_retries # This option is deprecated for removal. # Its value may be silently ignored in the future. #rabbit_max_retries = 0 # Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this # option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring # is no longer controlled by the x-ha-policy argument when declaring a queue. # If you just want to make sure that all queues (except those with auto- # generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy # HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value) # Deprecated group/name - [DEFAULT]/rabbit_ha_queues #rabbit_ha_queues = false # Positive integer representing duration in seconds for queue TTL (x-expires). # Queues which are unused for the duration of the TTL are automatically # deleted. The parameter affects only reply and fanout queues. (integer value) # Minimum value: 1 #rabbit_transient_queues_ttl = 1800 # Specifies the number of messages to prefetch. Setting to zero allows # unlimited messages. (integer value) #rabbit_qos_prefetch_count = 0 # Number of seconds after which the Rabbit broker is considered down if # heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer # value) #heartbeat_timeout_threshold = 60 # How often times during the heartbeat_timeout_threshold we check the # heartbeat. (integer value) #heartbeat_rate = 2 # Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value) # Deprecated group/name - [DEFAULT]/fake_rabbit #fake_rabbit = false # Maximum number of channels to allow (integer value) #channel_max = # The maximum byte size for an AMQP frame (integer value) #frame_max = # How often to send heartbeats for consumer's connections (integer value) #heartbeat_interval = 3 # Enable SSL (boolean value) #ssl = # Arguments passed to ssl.wrap_socket (dict value) #ssl_options = # Set socket timeout in seconds for connection's socket (floating point value) #socket_timeout = 0.25 # Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point # value) #tcp_user_timeout = 0.25 # Set delay for reconnection to some host which has connection error (floating # point value) #host_connection_reconnect_delay = 0.25 # Connection factory implementation (string value) # Allowed values: new, single, read_write #connection_factory = single # Maximum number of connections to keep queued. (integer value) #pool_max_size = 30 # Maximum number of connections to create above `pool_max_size`. (integer # value) #pool_max_overflow = 0 # Default number of seconds to wait for a connections to available (integer # value) #pool_timeout = 30 # Lifetime of a connection (since creation) in seconds or None for no # recycling. Expired connections are closed on acquire. (integer value) #pool_recycle = 600 # Threshold at which inactive (since release) connections are considered stale # in seconds or None for no staleness. Stale connections are closed on acquire. # (integer value) #pool_stale = 60 # Default serialization mechanism for serializing/deserializing # outgoing/incoming messages (string value) # Allowed values: json, msgpack #default_serializer_type = json # Persist notification messages. (boolean value) #notification_persistence = false # Exchange name for sending notifications (string value) #default_notification_exchange = ${control_exchange}_notification # Max number of not acknowledged message which RabbitMQ can send to # notification listener. (integer value) #notification_listener_prefetch_count = 100 # Reconnecting retry count in case of connectivity problem during sending # notification, -1 means infinite retry. (integer value) #default_notification_retry_attempts = -1 # Reconnecting retry delay in case of connectivity problem during sending # notification message (floating point value) #notification_retry_delay = 0.25 # Time to live for rpc queues without consumers in seconds. (integer value) #rpc_queue_expiration = 60 # Exchange name for sending RPC messages (string value) #default_rpc_exchange = ${control_exchange}_rpc # Exchange name for receiving RPC replies (string value) #rpc_reply_exchange = ${control_exchange}_rpc_reply # Max number of not acknowledged message which RabbitMQ can send to rpc # listener. (integer value) #rpc_listener_prefetch_count = 100 # Max number of not acknowledged message which RabbitMQ can send to rpc reply # listener. (integer value) #rpc_reply_listener_prefetch_count = 100 # Reconnecting retry count in case of connectivity problem during sending # reply. -1 means infinite retry during rpc_timeout (integer value) #rpc_reply_retry_attempts = -1 # Reconnecting retry delay in case of connectivity problem during sending # reply. (floating point value) #rpc_reply_retry_delay = 0.25 # Reconnecting retry count in case of connectivity problem during sending RPC # message, -1 means infinite retry. If actual retry attempts in not 0 the rpc # request could be processed more than one time (integer value) #default_rpc_retry_attempts = -1 # Reconnecting retry delay in case of connectivity problem during sending RPC # message (floating point value) #rpc_retry_delay = 0.25 [oslo_messaging_zmq] # # From oslo.messaging # # ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP. # The "host" option should point or resolve to this address. (string value) # Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address #rpc_zmq_bind_address = * # MatchMaker driver. (string value) # Allowed values: redis, sentinel, dummy # Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker #rpc_zmq_matchmaker = redis # Number of ZeroMQ contexts, defaults to 1. (integer value) # Deprecated group/name - [DEFAULT]/rpc_zmq_contexts #rpc_zmq_contexts = 1 # Maximum number of ingress messages to locally buffer per topic. Default is # unlimited. (integer value) # Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog #rpc_zmq_topic_backlog = # Directory for holding IPC sockets. (string value) # Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir #rpc_zmq_ipc_dir = /var/run/openstack # Name of this node. Must be a valid hostname, FQDN, or IP address. Must match # "host" option, if running Nova. (string value) # Deprecated group/name - [DEFAULT]/rpc_zmq_host #rpc_zmq_host = localhost # Number of seconds to wait before all pending messages will be sent after # closing a socket. The default value of -1 specifies an infinite linger # period. The value of 0 specifies no linger period. Pending messages shall be # discarded immediately when the socket is closed. Positive values specify an # upper bound for the linger period. (integer value) # Deprecated group/name - [DEFAULT]/rpc_cast_timeout #zmq_linger = -1 # The default number of seconds that poll should wait. Poll raises timeout # exception when timeout expired. (integer value) # Deprecated group/name - [DEFAULT]/rpc_poll_timeout #rpc_poll_timeout = 1 # Expiration timeout in seconds of a name service record about existing target # ( < 0 means no timeout). (integer value) # Deprecated group/name - [DEFAULT]/zmq_target_expire #zmq_target_expire = 300 # Update period in seconds of a name service record about existing target. # (integer value) # Deprecated group/name - [DEFAULT]/zmq_target_update #zmq_target_update = 180 # Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean # value) # Deprecated group/name - [DEFAULT]/use_pub_sub #use_pub_sub = false # Use ROUTER remote proxy. (boolean value) # Deprecated group/name - [DEFAULT]/use_router_proxy #use_router_proxy = false # This option makes direct connections dynamic or static. It makes sense only # with use_router_proxy=False which means to use direct connections for direct # message types (ignored otherwise). (boolean value) #use_dynamic_connections = false # How many additional connections to a host will be made for failover reasons. # This option is actual only in dynamic connections mode. (integer value) #zmq_failover_connections = 2 # Minimal port number for random ports range. (port value) # Minimum value: 0 # Maximum value: 65535 # Deprecated group/name - [DEFAULT]/rpc_zmq_min_port #rpc_zmq_min_port = 49153 # Maximal port number for random ports range. (integer value) # Minimum value: 1 # Maximum value: 65536 # Deprecated group/name - [DEFAULT]/rpc_zmq_max_port #rpc_zmq_max_port = 65536 # Number of retries to find free port number before fail with ZMQBindError. # (integer value) # Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries #rpc_zmq_bind_port_retries = 100 # Default serialization mechanism for serializing/deserializing # outgoing/incoming messages (string value) # Allowed values: json, msgpack # Deprecated group/name - [DEFAULT]/rpc_zmq_serialization #rpc_zmq_serialization = json # This option configures round-robin mode in zmq socket. True means not keeping # a queue when server side disconnects. False means to keep queue and messages # even if server is disconnected, when the server appears we send all # accumulated messages to it. (boolean value) #zmq_immediate = true # Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any # other negative value) means to skip any overrides and leave it to OS default; # 0 and 1 (or any other positive value) mean to disable and enable the option # respectively. (integer value) #zmq_tcp_keepalive = -1 # The duration between two keepalive transmissions in idle condition. The unit # is platform dependent, for example, seconds in Linux, milliseconds in Windows # etc. The default value of -1 (or any other negative value and 0) means to # skip any overrides and leave it to OS default. (integer value) #zmq_tcp_keepalive_idle = -1 # The number of retransmissions to be carried out before declaring that remote # end is not available. The default value of -1 (or any other negative value # and 0) means to skip any overrides and leave it to OS default. (integer # value) #zmq_tcp_keepalive_cnt = -1 # The duration between two successive keepalive retransmissions, if # acknowledgement to the previous keepalive transmission is not received. The # unit is platform dependent, for example, seconds in Linux, milliseconds in # Windows etc. The default value of -1 (or any other negative value and 0) # means to skip any overrides and leave it to OS default. (integer value) #zmq_tcp_keepalive_intvl = -1 # Maximum number of (green) threads to work concurrently. (integer value) #rpc_thread_pool_size = 100 # Expiration timeout in seconds of a sent/received message after which it is # not tracked anymore by a client/server. (integer value) #rpc_message_ttl = 300 # Wait for message acknowledgements from receivers. This mechanism works only # via proxy without PUB/SUB. (boolean value) #rpc_use_acks = false # Number of seconds to wait for an ack from a cast/call. After each retry # attempt this timeout is multiplied by some specified multiplier. (integer # value) #rpc_ack_timeout_base = 15 # Number to multiply base ack timeout by after each retry attempt. (integer # value) #rpc_ack_timeout_multiplier = 2 # Default number of message sending attempts in case of any problems occurred: # positive value N means at most N retries, 0 means no retries, None or -1 (or # any other negative values) mean to retry forever. This option is used only if # acknowledgments are enabled. (integer value) #rpc_retry_attempts = 3 # List of publisher hosts SubConsumer can subscribe on. This option has higher # priority then the default publishers list taken from the matchmaker. (list # value) #subscribe_on = [oslo_middleware] # # From oslo.middleware # # The maximum body size for each request, in bytes. (integer value) # Deprecated group/name - [DEFAULT]/osapi_max_request_body_size # Deprecated group/name - [DEFAULT]/max_request_body_size #max_request_body_size = 114688 # DEPRECATED: The HTTP Header that will be used to determine what the original # request protocol scheme was, even if it was hidden by a SSL termination # proxy. (string value) # This option is deprecated for removal. # Its value may be silently ignored in the future. #secure_proxy_ssl_header = X-Forwarded-Proto # Whether the application is behind a proxy or not. This determines if the # middleware should parse the headers or not. (boolean value) #enable_proxy_headers_parsing = false [oslo_policy] # # From oslo.policy # # The file that defines policies. (string value) # Deprecated group/name - [DEFAULT]/policy_file #policy_file = policy.json # Default rule. Enforced when a requested rule is not found. (string value) # Deprecated group/name - [DEFAULT]/policy_default_rule #policy_default_rule = default # Directories where policy configuration files are stored. They can be relative # to any directory in the search path defined by the config_dir option, or # absolute paths. The file defined by policy_file must exist for these # directories to be searched. Missing or empty directories are ignored. (multi # valued) # Deprecated group/name - [DEFAULT]/policy_dirs #policy_dirs = policy.d [oslo_reports] # # From oslo.reports # # Path to a log directory where to create a file (string value) #log_dir = # The path to a file to watch for changes to trigger the reports, instead of # signals. Setting this option disables the signal trigger for the reports. If # application is running as a WSGI application it is recommended to use this # instead of signals. (string value) #file_event_handler = # How many seconds to wait between polls when file_event_handler is set # (integer value) #file_event_handler_interval = 1 [oslo_versionedobjects] # # From oslo.versionedobjects # # Make exception message format errors fatal (boolean value) #fatal_exception_format_errors = false [profiler] # # From osprofiler # # # Enables the profiling for all services on this node. Default value is False # (fully disable the profiling feature). # # Possible values: # # * True: Enables the feature # * False: Disables the feature. The profiling cannot be started via this # project # operations. If the profiling is triggered by another project, this project # part # will be empty. # (boolean value) # Deprecated group/name - [profiler]/profiler_enabled #enabled = false # # Enables SQL requests profiling in services. Default value is False (SQL # requests won't be traced). # # Possible values: # # * True: Enables SQL requests profiling. Each SQL query will be part of the # trace and can the be analyzed by how much time was spent for that. # * False: Disables SQL requests profiling. The spent time is only shown on a # higher level of operations. Single SQL queries cannot be analyzed this # way. # (boolean value) #trace_sqlalchemy = false # # Secret key(s) to use for encrypting context data for performance profiling. # This string value should have the following format: # [,,...], # where each key is some random string. A user who triggers the profiling via # the REST API has to set one of these keys in the headers of the REST API call # to include profiling results of this node for this particular project. # # Both "enabled" flag and "hmac_keys" config options should be set to enable # profiling. Also, to generate correct profiling information across all # services # at least one key needs to be consistent between OpenStack projects. This # ensures it can be used from client side to generate the trace, containing # information from all possible resources. (string value) #hmac_keys = SECRET_KEY # # Connection string for a notifier backend. Default value is messaging:// which # sets the notifier to oslo_messaging. # # Examples of possible values: # # * messaging://: use oslo_messaging driver for sending notifications. # * mongodb://127.0.0.1:27017 : use mongodb driver for sending notifications. # * elasticsearch://127.0.0.1:9200 : use elasticsearch driver for sending # notifications. # (string value) #connection_string = messaging:// # # Document type for notification indexing in elasticsearch. # (string value) #es_doc_type = notification # # This parameter is a time value parameter (for example: es_scroll_time=2m), # indicating for how long the nodes that participate in the search will # maintain # relevant resources in order to continue and support it. # (string value) #es_scroll_time = 2m # # Elasticsearch splits large requests in batches. This parameter defines # maximum size of each batch (for example: es_scroll_size=10000). # (integer value) #es_scroll_size = 10000 # # Redissentinel provides a timeout option on the connections. # This parameter defines that timeout (for example: socket_timeout=0.1). # (floating point value) #socket_timeout = 0.1 # # Redissentinel uses a service name to identify a master redis service. # This parameter defines the name (for example: # sentinal_service_name=mymaster). # (string value) #sentinel_service_name = mymaster [ssl] # # From oslo.service.sslutils # # CA certificate file to use to verify connecting clients. (string value) # Deprecated group/name - [DEFAULT]/ssl_ca_file #ca_file = # Certificate file to use when starting the server securely. (string value) # Deprecated group/name - [DEFAULT]/ssl_cert_file #cert_file = # Private key file to use when starting the server securely. (string value) # Deprecated group/name - [DEFAULT]/ssl_key_file #key_file = # SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and # SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some # distributions. (string value) #version = # Sets the list of available ciphers. value should be a string in the OpenSSL # cipher list format. (string value) #ciphers =