diff --git a/Documentation/admin-guide/hw-vuln/mds.rst b/Documentation/admin-guide/hw-vuln/mds.rst index e3a796c0d3a2..2d19c9f4c1fe 100644 --- a/Documentation/admin-guide/hw-vuln/mds.rst +++ b/Documentation/admin-guide/hw-vuln/mds.rst @@ -265,8 +265,11 @@ time with the option "mds=". The valid arguments for this option are: ============ ============================================================= -Not specifying this option is equivalent to "mds=full". - +Not specifying this option is equivalent to "mds=full". For processors +that are affected by both TAA (TSX Asynchronous Abort) and MDS, +specifying just "mds=off" without an accompanying "tsx_async_abort=off" +will have no effect as the same mitigation is used for both +vulnerabilities. Mitigation selection guide -------------------------- diff --git a/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst b/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst index fddbd7579c53..af6865b822d2 100644 --- a/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst +++ b/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst @@ -174,7 +174,10 @@ the option "tsx_async_abort=". The valid arguments for this option are: CPU is not vulnerable to cross-thread TAA attacks. ============ ============================================================= -Not specifying this option is equivalent to "tsx_async_abort=full". +Not specifying this option is equivalent to "tsx_async_abort=full". For +processors that are affected by both TAA and MDS, specifying just +"tsx_async_abort=off" without an accompanying "mds=off" will have no +effect as the same mitigation is used for both vulnerabilities. The kernel command line also allows to control the TSX feature using the parameter "tsx=" on CPUs which support TSX control. MSR_IA32_TSX_CTRL is used diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 8dee8f68fe15..9983ac73b66d 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -2473,6 +2473,12 @@ SMT on vulnerable CPUs off - Unconditionally disable MDS mitigation + On TAA-affected machines, mds=off can be prevented by + an active TAA mitigation as both vulnerabilities are + mitigated with the same mechanism so in order to disable + this mitigation, you need to specify tsx_async_abort=off + too. + Not specifying this option is equivalent to mds=full. @@ -4931,6 +4937,11 @@ vulnerable to cross-thread TAA attacks. off - Unconditionally disable TAA mitigation + On MDS-affected machines, tsx_async_abort=off can be + prevented by an active MDS mitigation as both vulnerabilities + are mitigated with the same mechanism so in order to disable + this mitigation, you need to specify mds=off too. + Not specifying this option is equivalent to tsx_async_abort=full. On CPUs which are MDS affected and deploy MDS mitigation, TAA mitigation is not diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt index ae661e65354e..f9499b20d840 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt @@ -81,6 +81,12 @@ Optional properties: Definition: Name of external front end module used. Some valid FEM names for example: "microsemi-lx5586", "sky85703-11" and "sky85803" etc. +- qcom,snoc-host-cap-8bit-quirk: + Usage: Optional + Value type: + Definition: Quirk specifying that the firmware expects the 8bit version + of the host capability QMI request + Example (to supply PCI based wifi block details): diff --git a/Makefile b/Makefile index d4d36c61940b..641a62423fd6 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 5 PATCHLEVEL = 4 -SUBLEVEL = 0 +SUBLEVEL = 1 EXTRAVERSION = NAME = Kleptomaniac Octopus diff --git a/arch/powerpc/include/asm/asm-prototypes.h b/arch/powerpc/include/asm/asm-prototypes.h index 8561498e653c..d84d1417ddb6 100644 --- a/arch/powerpc/include/asm/asm-prototypes.h +++ b/arch/powerpc/include/asm/asm-prototypes.h @@ -152,9 +152,12 @@ void _kvmppc_save_tm_pr(struct kvm_vcpu *vcpu, u64 guest_msr); /* Patch sites */ extern s32 patch__call_flush_count_cache; extern s32 patch__flush_count_cache_return; +extern s32 patch__flush_link_stack_return; +extern s32 patch__call_kvm_flush_link_stack; extern s32 patch__memset_nocache, patch__memcpy_nocache; extern long flush_count_cache; +extern long kvm_flush_link_stack; #ifdef CONFIG_PPC_TRANSACTIONAL_MEM void kvmppc_save_tm_hv(struct kvm_vcpu *vcpu, u64 msr, bool preserve_nv); diff --git a/arch/powerpc/include/asm/security_features.h b/arch/powerpc/include/asm/security_features.h index 759597bf0fd8..ccf44c135389 100644 --- a/arch/powerpc/include/asm/security_features.h +++ b/arch/powerpc/include/asm/security_features.h @@ -81,6 +81,9 @@ static inline bool security_ftr_enabled(unsigned long feature) // Software required to flush count cache on context switch #define SEC_FTR_FLUSH_COUNT_CACHE 0x0000000000000400ull +// Software required to flush link stack on context switch +#define SEC_FTR_FLUSH_LINK_STACK 0x0000000000001000ull + // Features enabled by default #define SEC_FTR_DEFAULT \ diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 6467bdab8d40..3fd3ef352e3f 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -537,6 +537,7 @@ flush_count_cache: /* Save LR into r9 */ mflr r9 + // Flush the link stack .rept 64 bl .+4 .endr @@ -546,6 +547,11 @@ flush_count_cache: .balign 32 /* Restore LR */ 1: mtlr r9 + + // If we're just flushing the link stack, return here +3: nop + patch_site 3b patch__flush_link_stack_return + li r9,0x7fff mtctr r9 diff --git a/arch/powerpc/kernel/security.c b/arch/powerpc/kernel/security.c index 7cfcb294b11c..bd91dceb7010 100644 --- a/arch/powerpc/kernel/security.c +++ b/arch/powerpc/kernel/security.c @@ -24,6 +24,7 @@ enum count_cache_flush_type { COUNT_CACHE_FLUSH_HW = 0x4, }; static enum count_cache_flush_type count_cache_flush_type = COUNT_CACHE_FLUSH_NONE; +static bool link_stack_flush_enabled; bool barrier_nospec_enabled; static bool no_nospec; @@ -212,11 +213,19 @@ ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr, c if (ccd) seq_buf_printf(&s, "Indirect branch cache disabled"); + + if (link_stack_flush_enabled) + seq_buf_printf(&s, ", Software link stack flush"); + } else if (count_cache_flush_type != COUNT_CACHE_FLUSH_NONE) { seq_buf_printf(&s, "Mitigation: Software count cache flush"); if (count_cache_flush_type == COUNT_CACHE_FLUSH_HW) seq_buf_printf(&s, " (hardware accelerated)"); + + if (link_stack_flush_enabled) + seq_buf_printf(&s, ", Software link stack flush"); + } else if (btb_flush_enabled) { seq_buf_printf(&s, "Mitigation: Branch predictor state flush"); } else { @@ -377,18 +386,49 @@ static __init int stf_barrier_debugfs_init(void) device_initcall(stf_barrier_debugfs_init); #endif /* CONFIG_DEBUG_FS */ +static void no_count_cache_flush(void) +{ + count_cache_flush_type = COUNT_CACHE_FLUSH_NONE; + pr_info("count-cache-flush: software flush disabled.\n"); +} + static void toggle_count_cache_flush(bool enable) { - if (!enable || !security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE)) { + if (!security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE) && + !security_ftr_enabled(SEC_FTR_FLUSH_LINK_STACK)) + enable = false; + + if (!enable) { patch_instruction_site(&patch__call_flush_count_cache, PPC_INST_NOP); - count_cache_flush_type = COUNT_CACHE_FLUSH_NONE; - pr_info("count-cache-flush: software flush disabled.\n"); +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE + patch_instruction_site(&patch__call_kvm_flush_link_stack, PPC_INST_NOP); +#endif + pr_info("link-stack-flush: software flush disabled.\n"); + link_stack_flush_enabled = false; + no_count_cache_flush(); return; } + // This enables the branch from _switch to flush_count_cache patch_branch_site(&patch__call_flush_count_cache, (u64)&flush_count_cache, BRANCH_SET_LINK); +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE + // This enables the branch from guest_exit_cont to kvm_flush_link_stack + patch_branch_site(&patch__call_kvm_flush_link_stack, + (u64)&kvm_flush_link_stack, BRANCH_SET_LINK); +#endif + + pr_info("link-stack-flush: software flush enabled.\n"); + link_stack_flush_enabled = true; + + // If we just need to flush the link stack, patch an early return + if (!security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE)) { + patch_instruction_site(&patch__flush_link_stack_return, PPC_INST_BLR); + no_count_cache_flush(); + return; + } + if (!security_ftr_enabled(SEC_FTR_BCCTR_FLUSH_ASSIST)) { count_cache_flush_type = COUNT_CACHE_FLUSH_SW; pr_info("count-cache-flush: full software flush sequence enabled.\n"); @@ -407,11 +447,20 @@ void setup_count_cache_flush(void) if (no_spectrev2 || cpu_mitigations_off()) { if (security_ftr_enabled(SEC_FTR_BCCTRL_SERIALISED) || security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED)) - pr_warn("Spectre v2 mitigations not under software control, can't disable\n"); + pr_warn("Spectre v2 mitigations not fully under software control, can't disable\n"); enable = false; } + /* + * There's no firmware feature flag/hypervisor bit to tell us we need to + * flush the link stack on context switch. So we set it here if we see + * either of the Spectre v2 mitigations that aim to protect userspace. + */ + if (security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED) || + security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE)) + security_ftr_set(SEC_FTR_FLUSH_LINK_STACK); + toggle_count_cache_flush(enable); } diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index faebcbb8c4db..0496e66aaa56 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -11,6 +11,7 @@ */ #include +#include #include #include #include @@ -1487,6 +1488,13 @@ guest_exit_cont: /* r9 = vcpu, r12 = trap, r13 = paca */ 1: #endif /* CONFIG_KVM_XICS */ + /* + * Possibly flush the link stack here, before we do a blr in + * guest_exit_short_path. + */ +1: nop + patch_site 1b patch__call_kvm_flush_link_stack + /* If we came in through the P9 short path, go back out to C now */ lwz r0, STACK_SLOT_SHORT_PATH(r1) cmpwi r0, 0 @@ -1963,6 +1971,28 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) mtlr r0 blr +.balign 32 +.global kvm_flush_link_stack +kvm_flush_link_stack: + /* Save LR into r0 */ + mflr r0 + + /* Flush the link stack. On Power8 it's up to 32 entries in size. */ + .rept 32 + bl .+4 + .endr + + /* And on Power9 it's up to 64. */ +BEGIN_FTR_SECTION + .rept 32 + bl .+4 + .endr +END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) + + /* Restore LR */ + mtlr r0 + blr + kvmppc_guest_external: /* External interrupt, first check for host_ipi. If this is * set, we know the host wants us out so let's do it now diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S index f83ca5aa8b77..f07baf0388bc 100644 --- a/arch/x86/entry/entry_32.S +++ b/arch/x86/entry/entry_32.S @@ -172,7 +172,7 @@ ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI .if \no_user_check == 0 /* coming from usermode? */ - testl $SEGMENT_RPL_MASK, PT_CS(%esp) + testl $USER_SEGMENT_RPL_MASK, PT_CS(%esp) jz .Lend_\@ .endif /* On user-cr3? */ @@ -205,64 +205,76 @@ #define CS_FROM_ENTRY_STACK (1 << 31) #define CS_FROM_USER_CR3 (1 << 30) #define CS_FROM_KERNEL (1 << 29) +#define CS_FROM_ESPFIX (1 << 28) .macro FIXUP_FRAME /* * The high bits of the CS dword (__csh) are used for CS_FROM_*. * Clear them in case hardware didn't do this for us. */ - andl $0x0000ffff, 3*4(%esp) + andl $0x0000ffff, 4*4(%esp) #ifdef CONFIG_VM86 - testl $X86_EFLAGS_VM, 4*4(%esp) + testl $X86_EFLAGS_VM, 5*4(%esp) jnz .Lfrom_usermode_no_fixup_\@ #endif - testl $SEGMENT_RPL_MASK, 3*4(%esp) + testl $USER_SEGMENT_RPL_MASK, 4*4(%esp) jnz .Lfrom_usermode_no_fixup_\@ - orl $CS_FROM_KERNEL, 3*4(%esp) + orl $CS_FROM_KERNEL, 4*4(%esp) /* * When we're here from kernel mode; the (exception) stack looks like: * - * 5*4(%esp) - - * 4*4(%esp) - flags - * 3*4(%esp) - cs - * 2*4(%esp) - ip - * 1*4(%esp) - orig_eax - * 0*4(%esp) - gs / function + * 6*4(%esp) - + * 5*4(%esp) - flags + * 4*4(%esp) - cs + * 3*4(%esp) - ip + * 2*4(%esp) - orig_eax + * 1*4(%esp) - gs / function + * 0*4(%esp) - fs * * Lets build a 5 entry IRET frame after that, such that struct pt_regs * is complete and in particular regs->sp is correct. This gives us - * the original 5 enties as gap: + * the original 6 enties as gap: * - * 12*4(%esp) - - * 11*4(%esp) - gap / flags - * 10*4(%esp) - gap / cs - * 9*4(%esp) - gap / ip - * 8*4(%esp) - gap / orig_eax - * 7*4(%esp) - gap / gs / function - * 6*4(%esp) - ss - * 5*4(%esp) - sp - * 4*4(%esp) - flags - * 3*4(%esp) - cs - * 2*4(%esp) - ip - * 1*4(%esp) - orig_eax - * 0*4(%esp) - gs / function + * 14*4(%esp) - + * 13*4(%esp) - gap / flags + * 12*4(%esp) - gap / cs + * 11*4(%esp) - gap / ip + * 10*4(%esp) - gap / orig_eax + * 9*4(%esp) - gap / gs / function + * 8*4(%esp) - gap / fs + * 7*4(%esp) - ss + * 6*4(%esp) - sp + * 5*4(%esp) - flags + * 4*4(%esp) - cs + * 3*4(%esp) - ip + * 2*4(%esp) - orig_eax + * 1*4(%esp) - gs / function + * 0*4(%esp) - fs */ pushl %ss # ss pushl %esp # sp (points at ss) - addl $6*4, (%esp) # point sp back at the previous context - pushl 6*4(%esp) # flags - pushl 6*4(%esp) # cs - pushl 6*4(%esp) # ip - pushl 6*4(%esp) # orig_eax - pushl 6*4(%esp) # gs / function + addl $7*4, (%esp) # point sp back at the previous context + pushl 7*4(%esp) # flags + pushl 7*4(%esp) # cs + pushl 7*4(%esp) # ip + pushl 7*4(%esp) # orig_eax + pushl 7*4(%esp) # gs / function + pushl 7*4(%esp) # fs .Lfrom_usermode_no_fixup_\@: .endm .macro IRET_FRAME + /* + * We're called with %ds, %es, %fs, and %gs from the interrupted + * frame, so we shouldn't use them. Also, we may be in ESPFIX + * mode and therefore have a nonzero SS base and an offset ESP, + * so any attempt to access the stack needs to use SS. (except for + * accesses through %esp, which automatically use SS.) + */ testl $CS_FROM_KERNEL, 1*4(%esp) jz .Lfinished_frame_\@ @@ -276,31 +288,40 @@ movl 5*4(%esp), %eax # (modified) regs->sp movl 4*4(%esp), %ecx # flags - movl %ecx, -4(%eax) + movl %ecx, %ss:-1*4(%eax) movl 3*4(%esp), %ecx # cs andl $0x0000ffff, %ecx - movl %ecx, -8(%eax) + movl %ecx, %ss:-2*4(%eax) movl 2*4(%esp), %ecx # ip - movl %ecx, -12(%eax) + movl %ecx, %ss:-3*4(%eax) movl 1*4(%esp), %ecx # eax - movl %ecx, -16(%eax) + movl %ecx, %ss:-4*4(%eax) popl %ecx - lea -16(%eax), %esp + lea -4*4(%eax), %esp popl %eax .Lfinished_frame_\@: .endm -.macro SAVE_ALL pt_regs_ax=%eax switch_stacks=0 skip_gs=0 +.macro SAVE_ALL pt_regs_ax=%eax switch_stacks=0 skip_gs=0 unwind_espfix=0 cld .if \skip_gs == 0 PUSH_GS .endif - FIXUP_FRAME pushl %fs + + pushl %eax + movl $(__KERNEL_PERCPU), %eax + movl %eax, %fs +.if \unwind_espfix > 0 + UNWIND_ESPFIX_STACK +.endif + popl %eax + + FIXUP_FRAME pushl %es pushl %ds pushl \pt_regs_ax @@ -313,8 +334,6 @@ movl $(__USER_DS), %edx movl %edx, %ds movl %edx, %es - movl $(__KERNEL_PERCPU), %edx - movl %edx, %fs .if \skip_gs == 0 SET_KERNEL_GS %edx .endif @@ -324,8 +343,8 @@ .endif .endm -.macro SAVE_ALL_NMI cr3_reg:req - SAVE_ALL +.macro SAVE_ALL_NMI cr3_reg:req unwind_espfix=0 + SAVE_ALL unwind_espfix=\unwind_espfix BUG_IF_WRONG_CR3 @@ -357,6 +376,7 @@ 2: popl %es 3: popl %fs POP_GS \pop + IRET_FRAME .pushsection .fixup, "ax" 4: movl $0, (%esp) jmp 1b @@ -395,7 +415,8 @@ .macro CHECK_AND_APPLY_ESPFIX #ifdef CONFIG_X86_ESPFIX32 -#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + (GDT_ENTRY_ESPFIX_SS * 8) +#define GDT_ESPFIX_OFFSET (GDT_ENTRY_ESPFIX_SS * 8) +#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + GDT_ESPFIX_OFFSET ALTERNATIVE "jmp .Lend_\@", "", X86_BUG_ESPFIX @@ -1075,7 +1096,6 @@ restore_all: /* Restore user state */ RESTORE_REGS pop=4 # skip orig_eax/error_code .Lirq_return: - IRET_FRAME /* * ARCH_HAS_MEMBARRIER_SYNC_CORE rely on IRET core serialization * when returning from IPI handler and when returning from @@ -1128,30 +1148,43 @@ ENDPROC(entry_INT80_32) * We can't call C functions using the ESPFIX stack. This code reads * the high word of the segment base from the GDT and swiches to the * normal stack and adjusts ESP with the matching offset. + * + * We might be on user CR3 here, so percpu data is not mapped and we can't + * access the GDT through the percpu segment. Instead, use SGDT to find + * the cpu_entry_area alias of the GDT. */ #ifdef CONFIG_X86_ESPFIX32 /* fixup the stack */ - mov GDT_ESPFIX_SS + 4, %al /* bits 16..23 */ - mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */ + pushl %ecx + subl $2*4, %esp + sgdt (%esp) + movl 2(%esp), %ecx /* GDT address */ + /* + * Careful: ECX is a linear pointer, so we need to force base + * zero. %cs is the only known-linear segment we have right now. + */ + mov %cs:GDT_ESPFIX_OFFSET + 4(%ecx), %al /* bits 16..23 */ + mov %cs:GDT_ESPFIX_OFFSET + 7(%ecx), %ah /* bits 24..31 */ shl $16, %eax + addl $2*4, %esp + popl %ecx addl %esp, %eax /* the adjusted stack pointer */ pushl $__KERNEL_DS pushl %eax lss (%esp), %esp /* switch to the normal stack segment */ #endif .endm + .macro UNWIND_ESPFIX_STACK + /* It's safe to clobber %eax, all other regs need to be preserved */ #ifdef CONFIG_X86_ESPFIX32 movl %ss, %eax /* see if on espfix stack */ cmpw $__ESPFIX_SS, %ax - jne 27f - movl $__KERNEL_DS, %eax - movl %eax, %ds - movl %eax, %es + jne .Lno_fixup_\@ /* switch to normal stack */ FIXUP_ESPFIX_STACK -27: +.Lno_fixup_\@: #endif .endm @@ -1341,11 +1374,6 @@ END(spurious_interrupt_bug) #ifdef CONFIG_XEN_PV ENTRY(xen_hypervisor_callback) - pushl $-1 /* orig_ax = -1 => not a system call */ - SAVE_ALL - ENCODE_FRAME_POINTER - TRACE_IRQS_OFF - /* * Check to see if we got the event in the critical * region in xen_iret_direct, after we've reenabled @@ -1353,16 +1381,17 @@ ENTRY(xen_hypervisor_callback) * iret instruction's behaviour where it delivers a * pending interrupt when enabling interrupts: */ - movl PT_EIP(%esp), %eax - cmpl $xen_iret_start_crit, %eax + cmpl $xen_iret_start_crit, (%esp) jb 1f - cmpl $xen_iret_end_crit, %eax + cmpl $xen_iret_end_crit, (%esp) jae 1f - - jmp xen_iret_crit_fixup - -ENTRY(xen_do_upcall) -1: mov %esp, %eax + call xen_iret_crit_fixup +1: + pushl $-1 /* orig_ax = -1 => not a system call */ + SAVE_ALL + ENCODE_FRAME_POINTER + TRACE_IRQS_OFF + mov %esp, %eax call xen_evtchn_do_upcall #ifndef CONFIG_PREEMPTION call xen_maybe_preempt_hcall @@ -1449,10 +1478,9 @@ END(page_fault) common_exception_read_cr2: /* the function address is in %gs's slot on the stack */ - SAVE_ALL switch_stacks=1 skip_gs=1 + SAVE_ALL switch_stacks=1 skip_gs=1 unwind_espfix=1 ENCODE_FRAME_POINTER - UNWIND_ESPFIX_STACK /* fixup %gs */ GS_TO_REG %ecx @@ -1474,9 +1502,8 @@ END(common_exception_read_cr2) common_exception: /* the function address is in %gs's slot on the stack */ - SAVE_ALL switch_stacks=1 skip_gs=1 + SAVE_ALL switch_stacks=1 skip_gs=1 unwind_espfix=1 ENCODE_FRAME_POINTER - UNWIND_ESPFIX_STACK /* fixup %gs */ GS_TO_REG %ecx @@ -1515,6 +1542,10 @@ ENTRY(nmi) ASM_CLAC #ifdef CONFIG_X86_ESPFIX32 + /* + * ESPFIX_SS is only ever set on the return to user path + * after we've switched to the entry stack. + */ pushl %eax movl %ss, %eax cmpw $__ESPFIX_SS, %ax @@ -1550,6 +1581,11 @@ ENTRY(nmi) movl %ebx, %esp .Lnmi_return: +#ifdef CONFIG_X86_ESPFIX32 + testl $CS_FROM_ESPFIX, PT_CS(%esp) + jnz .Lnmi_from_espfix +#endif + CHECK_AND_APPLY_ESPFIX RESTORE_ALL_NMI cr3_reg=%edi pop=4 jmp .Lirq_return @@ -1557,23 +1593,42 @@ ENTRY(nmi) #ifdef CONFIG_X86_ESPFIX32 .Lnmi_espfix_stack: /* - * create the pointer to lss back + * Create the pointer to LSS back */ pushl %ss pushl %esp addl $4, (%esp) - /* copy the iret frame of 12 bytes */ - .rept 3 - pushl 16(%esp) - .endr - pushl %eax - SAVE_ALL_NMI cr3_reg=%edi + + /* Copy the (short) IRET frame */ + pushl 4*4(%esp) # flags + pushl 4*4(%esp) # cs + pushl 4*4(%esp) # ip + + pushl %eax # orig_ax + + SAVE_ALL_NMI cr3_reg=%edi unwind_espfix=1 ENCODE_FRAME_POINTER - FIXUP_ESPFIX_STACK # %eax == %esp + + /* clear CS_FROM_KERNEL, set CS_FROM_ESPFIX */ + xorl $(CS_FROM_ESPFIX | CS_FROM_KERNEL), PT_CS(%esp) + xorl %edx, %edx # zero error code - call do_nmi + movl %esp, %eax # pt_regs pointer + jmp .Lnmi_from_sysenter_stack + +.Lnmi_from_espfix: RESTORE_ALL_NMI cr3_reg=%edi - lss 12+4(%esp), %esp # back to espfix stack + /* + * Because we cleared CS_FROM_KERNEL, IRET_FRAME 'forgot' to + * fix up the gap and long frame: + * + * 3 - original frame (exception) + * 2 - ESPFIX block (above) + * 6 - gap (FIXUP_FRAME) + * 5 - long frame (FIXUP_FRAME) + * 1 - orig_ax + */ + lss (1+5+6)*4(%esp), %esp # back to espfix stack jmp .Lirq_return #endif END(nmi) diff --git a/arch/x86/include/asm/cpu_entry_area.h b/arch/x86/include/asm/cpu_entry_area.h index 8348f7d69fd5..ea866c7bf31d 100644 --- a/arch/x86/include/asm/cpu_entry_area.h +++ b/arch/x86/include/asm/cpu_entry_area.h @@ -78,8 +78,12 @@ struct cpu_entry_area { /* * The GDT is just below entry_stack and thus serves (on x86_64) as - * a a read-only guard page. + * a read-only guard page. On 32-bit the GDT must be writeable, so + * it needs an extra guard page. */ +#ifdef CONFIG_X86_32 + char guard_entry_stack[PAGE_SIZE]; +#endif struct entry_stack_page entry_stack_page; /* @@ -94,7 +98,6 @@ struct cpu_entry_area { */ struct cea_exception_stacks estacks; #endif -#ifdef CONFIG_CPU_SUP_INTEL /* * Per CPU debug store for Intel performance monitoring. Wastes a * full page at the moment. @@ -105,11 +108,13 @@ struct cpu_entry_area { * Reserve enough fixmap PTEs. */ struct debug_store_buffers cpu_debug_buffers; -#endif }; -#define CPU_ENTRY_AREA_SIZE (sizeof(struct cpu_entry_area)) -#define CPU_ENTRY_AREA_TOT_SIZE (CPU_ENTRY_AREA_SIZE * NR_CPUS) +#define CPU_ENTRY_AREA_SIZE (sizeof(struct cpu_entry_area)) +#define CPU_ENTRY_AREA_ARRAY_SIZE (CPU_ENTRY_AREA_SIZE * NR_CPUS) + +/* Total size includes the readonly IDT mapping page as well: */ +#define CPU_ENTRY_AREA_TOTAL_SIZE (CPU_ENTRY_AREA_ARRAY_SIZE + PAGE_SIZE) DECLARE_PER_CPU(struct cpu_entry_area *, cpu_entry_area); DECLARE_PER_CPU(struct cea_exception_stacks *, cea_exception_stacks); @@ -117,13 +122,14 @@ DECLARE_PER_CPU(struct cea_exception_stacks *, cea_exception_stacks); extern void setup_cpu_entry_areas(void); extern void cea_set_pte(void *cea_vaddr, phys_addr_t pa, pgprot_t flags); +/* Single page reserved for the readonly IDT mapping: */ #define CPU_ENTRY_AREA_RO_IDT CPU_ENTRY_AREA_BASE #define CPU_ENTRY_AREA_PER_CPU (CPU_ENTRY_AREA_RO_IDT + PAGE_SIZE) #define CPU_ENTRY_AREA_RO_IDT_VADDR ((void *)CPU_ENTRY_AREA_RO_IDT) #define CPU_ENTRY_AREA_MAP_SIZE \ - (CPU_ENTRY_AREA_PER_CPU + CPU_ENTRY_AREA_TOT_SIZE - CPU_ENTRY_AREA_BASE) + (CPU_ENTRY_AREA_PER_CPU + CPU_ENTRY_AREA_ARRAY_SIZE - CPU_ENTRY_AREA_BASE) extern struct cpu_entry_area *get_cpu_entry_area(int cpu); diff --git a/arch/x86/include/asm/pgtable_32_types.h b/arch/x86/include/asm/pgtable_32_types.h index b0bc0fff5f1f..1636eb8e5a5b 100644 --- a/arch/x86/include/asm/pgtable_32_types.h +++ b/arch/x86/include/asm/pgtable_32_types.h @@ -44,11 +44,11 @@ extern bool __vmalloc_start_set; /* set once high_memory is set */ * Define this here and validate with BUILD_BUG_ON() in pgtable_32.c * to avoid include recursion hell */ -#define CPU_ENTRY_AREA_PAGES (NR_CPUS * 40) +#define CPU_ENTRY_AREA_PAGES (NR_CPUS * 39) -#define CPU_ENTRY_AREA_BASE \ - ((FIXADDR_TOT_START - PAGE_SIZE * (CPU_ENTRY_AREA_PAGES + 1)) \ - & PMD_MASK) +/* The +1 is for the readonly IDT page: */ +#define CPU_ENTRY_AREA_BASE \ + ((FIXADDR_TOT_START - PAGE_SIZE*(CPU_ENTRY_AREA_PAGES+1)) & PMD_MASK) #define LDT_BASE_ADDR \ ((CPU_ENTRY_AREA_BASE - PAGE_SIZE) & PMD_MASK) diff --git a/arch/x86/include/asm/segment.h b/arch/x86/include/asm/segment.h index ac3892920419..6669164abadc 100644 --- a/arch/x86/include/asm/segment.h +++ b/arch/x86/include/asm/segment.h @@ -31,6 +31,18 @@ */ #define SEGMENT_RPL_MASK 0x3 +/* + * When running on Xen PV, the actual privilege level of the kernel is 1, + * not 0. Testing the Requested Privilege Level in a segment selector to + * determine whether the context is user mode or kernel mode with + * SEGMENT_RPL_MASK is wrong because the PV kernel's privilege level + * matches the 0x3 mask. + * + * Testing with USER_SEGMENT_RPL_MASK is valid for both native and Xen PV + * kernels because privilege level 2 is never used. + */ +#define USER_SEGMENT_RPL_MASK 0x2 + /* User mode is privilege level 3: */ #define USER_RPL 0x3 diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 4c7b0fa15a19..8bf64899f56a 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -39,6 +39,7 @@ static void __init spectre_v2_select_mitigation(void); static void __init ssb_select_mitigation(void); static void __init l1tf_select_mitigation(void); static void __init mds_select_mitigation(void); +static void __init mds_print_mitigation(void); static void __init taa_select_mitigation(void); /* The base value of the SPEC_CTRL MSR that always has to be preserved. */ @@ -108,6 +109,12 @@ void __init check_bugs(void) mds_select_mitigation(); taa_select_mitigation(); + /* + * As MDS and TAA mitigations are inter-related, print MDS + * mitigation until after TAA mitigation selection is done. + */ + mds_print_mitigation(); + arch_smt_update(); #ifdef CONFIG_X86_32 @@ -245,6 +252,12 @@ static void __init mds_select_mitigation(void) (mds_nosmt || cpu_mitigations_auto_nosmt())) cpu_smt_disable(false); } +} + +static void __init mds_print_mitigation(void) +{ + if (!boot_cpu_has_bug(X86_BUG_MDS) || cpu_mitigations_off()) + return; pr_info("%s\n", mds_strings[mds_mitigation]); } @@ -304,8 +317,12 @@ static void __init taa_select_mitigation(void) return; } - /* TAA mitigation is turned off on the cmdline (tsx_async_abort=off) */ - if (taa_mitigation == TAA_MITIGATION_OFF) + /* + * TAA mitigation via VERW is turned off if both + * tsx_async_abort=off and mds=off are specified. + */ + if (taa_mitigation == TAA_MITIGATION_OFF && + mds_mitigation == MDS_MITIGATION_OFF) goto out; if (boot_cpu_has(X86_FEATURE_MD_CLEAR)) @@ -339,6 +356,15 @@ static void __init taa_select_mitigation(void) if (taa_nosmt || cpu_mitigations_auto_nosmt()) cpu_smt_disable(false); + /* + * Update MDS mitigation, if necessary, as the mds_user_clear is + * now enabled for TAA mitigation. + */ + if (mds_mitigation == MDS_MITIGATION_OFF && + boot_cpu_has_bug(X86_BUG_MDS)) { + mds_mitigation = MDS_MITIGATION_FULL; + mds_select_mitigation(); + } out: pr_info("%s\n", taa_strings[taa_mitigation]); } diff --git a/arch/x86/kernel/doublefault.c b/arch/x86/kernel/doublefault.c index 0b8cedb20d6d..d5c9b13bafdf 100644 --- a/arch/x86/kernel/doublefault.c +++ b/arch/x86/kernel/doublefault.c @@ -65,6 +65,9 @@ struct x86_hw_tss doublefault_tss __cacheline_aligned = { .ss = __KERNEL_DS, .ds = __USER_DS, .fs = __KERNEL_PERCPU, +#ifndef CONFIG_X86_32_LAZY_GS + .gs = __KERNEL_STACK_CANARY, +#endif .__cr3 = __pa_nodebug(swapper_pg_dir), }; diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index 30f9cb2c0b55..2e6a0676c1f4 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -571,6 +571,16 @@ ENTRY(initial_page_table) # error "Kernel PMDs should be 1, 2 or 3" # endif .align PAGE_SIZE /* needs to be page-sized too */ + +#ifdef CONFIG_PAGE_TABLE_ISOLATION + /* + * PTI needs another page so sync_initial_pagetable() works correctly + * and does not scribble over the data which is placed behind the + * actual initial_page_table. See clone_pgd_range(). + */ + .fill 1024, 4, 0 +#endif + #endif .data diff --git a/arch/x86/mm/cpu_entry_area.c b/arch/x86/mm/cpu_entry_area.c index 752ad11d6868..d9643647a9ce 100644 --- a/arch/x86/mm/cpu_entry_area.c +++ b/arch/x86/mm/cpu_entry_area.c @@ -178,7 +178,9 @@ static __init void setup_cpu_entry_area_ptes(void) #ifdef CONFIG_X86_32 unsigned long start, end; - BUILD_BUG_ON(CPU_ENTRY_AREA_PAGES * PAGE_SIZE < CPU_ENTRY_AREA_MAP_SIZE); + /* The +1 is for the readonly IDT: */ + BUILD_BUG_ON((CPU_ENTRY_AREA_PAGES+1)*PAGE_SIZE != CPU_ENTRY_AREA_MAP_SIZE); + BUILD_BUG_ON(CPU_ENTRY_AREA_TOTAL_SIZE != CPU_ENTRY_AREA_MAP_SIZE); BUG_ON(CPU_ENTRY_AREA_BASE & ~PMD_MASK); start = CPU_ENTRY_AREA_BASE; diff --git a/arch/x86/tools/gen-insn-attr-x86.awk b/arch/x86/tools/gen-insn-attr-x86.awk index b02a36b2c14f..a42015b305f4 100644 --- a/arch/x86/tools/gen-insn-attr-x86.awk +++ b/arch/x86/tools/gen-insn-attr-x86.awk @@ -69,7 +69,7 @@ BEGIN { lprefix1_expr = "\\((66|!F3)\\)" lprefix2_expr = "\\(F3\\)" - lprefix3_expr = "\\((F2|!F3|66\\&F2)\\)" + lprefix3_expr = "\\((F2|!F3|66&F2)\\)" lprefix_expr = "\\((66|F2|F3)\\)" max_lprefix = 4 @@ -257,7 +257,7 @@ function convert_operands(count,opnd, i,j,imm,mod) return add_flags(imm, mod) } -/^[0-9a-f]+\:/ { +/^[0-9a-f]+:/ { if (NR == 1) next # get index diff --git a/arch/x86/xen/xen-asm_32.S b/arch/x86/xen/xen-asm_32.S index c15db060a242..cd177772fe4d 100644 --- a/arch/x86/xen/xen-asm_32.S +++ b/arch/x86/xen/xen-asm_32.S @@ -126,10 +126,9 @@ hyper_iret: .globl xen_iret_start_crit, xen_iret_end_crit /* - * This is called by xen_hypervisor_callback in entry.S when it sees + * This is called by xen_hypervisor_callback in entry_32.S when it sees * that the EIP at the time of interrupt was between - * xen_iret_start_crit and xen_iret_end_crit. We're passed the EIP in - * %eax so we can do a more refined determination of what to do. + * xen_iret_start_crit and xen_iret_end_crit. * * The stack format at this point is: * ---------------- @@ -138,70 +137,46 @@ hyper_iret: * eflags } outer exception info * cs } * eip } - * ---------------- <- edi (copy dest) - * eax : outer eax if it hasn't been restored * ---------------- - * eflags } nested exception info - * cs } (no ss/esp because we're nested - * eip } from the same ring) - * orig_eax }<- esi (copy src) - * - - - - - - - - - * fs } - * es } - * ds } SAVE_ALL state - * eax } - * : : - * ebx }<- esp + * eax : outer eax if it hasn't been restored * ---------------- + * eflags } + * cs } nested exception info + * eip } + * return address : (into xen_hypervisor_callback) * - * In order to deliver the nested exception properly, we need to shift - * everything from the return addr up to the error code so it sits - * just under the outer exception info. This means that when we - * handle the exception, we do it in the context of the outer - * exception rather than starting a new one. + * In order to deliver the nested exception properly, we need to discard the + * nested exception frame such that when we handle the exception, we do it + * in the context of the outer exception rather than starting a new one. * - * The only caveat is that if the outer eax hasn't been restored yet - * (ie, it's still on stack), we need to insert its value into the - * SAVE_ALL state before going on, since it's usermode state which we - * eventually need to restore. + * The only caveat is that if the outer eax hasn't been restored yet (i.e. + * it's still on stack), we need to restore its value here. */ ENTRY(xen_iret_crit_fixup) /* * Paranoia: Make sure we're really coming from kernel space. * One could imagine a case where userspace jumps into the * critical range address, but just before the CPU delivers a - * GP, it decides to deliver an interrupt instead. Unlikely? - * Definitely. Easy to avoid? Yes. The Intel documents - * explicitly say that the reported EIP for a bad jump is the - * jump instruction itself, not the destination, but some - * virtual environments get this wrong. + * PF, it decides to deliver an interrupt instead. Unlikely? + * Definitely. Easy to avoid? Yes. */ - movl PT_CS(%esp), %ecx - andl $SEGMENT_RPL_MASK, %ecx - cmpl $USER_RPL, %ecx - je 2f - - lea PT_ORIG_EAX(%esp), %esi - lea PT_EFLAGS(%esp), %edi + testb $2, 2*4(%esp) /* nested CS */ + jnz 2f /* * If eip is before iret_restore_end then stack * hasn't been restored yet. */ - cmp $iret_restore_end, %eax + cmpl $iret_restore_end, 1*4(%esp) jae 1f - movl 0+4(%edi), %eax /* copy EAX (just above top of frame) */ - movl %eax, PT_EAX(%esp) + movl 4*4(%esp), %eax /* load outer EAX */ + ret $4*4 /* discard nested EIP, CS, and EFLAGS as + * well as the just restored EAX */ - lea ESP_OFFSET(%edi), %edi /* move dest up over saved regs */ - - /* set up the copy */ -1: std - mov $PT_EIP / 4, %ecx /* saved regs up to orig_eax */ - rep movsl - cld - - lea 4(%edi), %esp /* point esp to new frame */ -2: jmp xen_do_upcall +1: + ret $3*4 /* discard nested EIP, CS, and EFLAGS */ +2: + ret +END(xen_iret_crit_fixup) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 19e75999bb15..57532465fb83 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -1032,14 +1032,15 @@ static int nbd_add_socket(struct nbd_device *nbd, unsigned long arg, sockfd_put(sock); return -ENOMEM; } + + config->socks = socks; + nsock = kzalloc(sizeof(struct nbd_sock), GFP_KERNEL); if (!nsock) { sockfd_put(sock); return -ENOMEM; } - config->socks = socks; - nsock->fallback_index = -1; nsock->dead = false; mutex_init(&nsock->tx_lock); diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c index fe2e307009f4..cf4a56095817 100644 --- a/drivers/bluetooth/hci_bcsp.c +++ b/drivers/bluetooth/hci_bcsp.c @@ -591,6 +591,7 @@ static int bcsp_recv(struct hci_uart *hu, const void *data, int count) if (*ptr == 0xc0) { BT_ERR("Short BCSP packet"); kfree_skb(bcsp->rx_skb); + bcsp->rx_skb = NULL; bcsp->rx_state = BCSP_W4_PKT_START; bcsp->rx_count = 0; } else @@ -606,6 +607,7 @@ static int bcsp_recv(struct hci_uart *hu, const void *data, int count) bcsp->rx_skb->data[2])) != bcsp->rx_skb->data[3]) { BT_ERR("Error in BCSP hdr checksum"); kfree_skb(bcsp->rx_skb); + bcsp->rx_skb = NULL; bcsp->rx_state = BCSP_W4_PKT_DELIMITER; bcsp->rx_count = 0; continue; @@ -630,6 +632,7 @@ static int bcsp_recv(struct hci_uart *hu, const void *data, int count) bscp_get_crc(bcsp)); kfree_skb(bcsp->rx_skb); + bcsp->rx_skb = NULL; bcsp->rx_state = BCSP_W4_PKT_DELIMITER; bcsp->rx_count = 0; continue; diff --git a/drivers/bluetooth/hci_ll.c b/drivers/bluetooth/hci_ll.c index 285706618f8a..d9a4c6c691e0 100644 --- a/drivers/bluetooth/hci_ll.c +++ b/drivers/bluetooth/hci_ll.c @@ -621,13 +621,6 @@ static int ll_setup(struct hci_uart *hu) serdev_device_set_flow_control(serdev, true); - if (hu->oper_speed) - speed = hu->oper_speed; - else if (hu->proto->oper_speed) - speed = hu->proto->oper_speed; - else - speed = 0; - do { /* Reset the Bluetooth device */ gpiod_set_value_cansleep(lldev->enable_gpio, 0); @@ -639,20 +632,6 @@ static int ll_setup(struct hci_uart *hu) return err; } - if (speed) { - __le32 speed_le = cpu_to_le32(speed); - struct sk_buff *skb; - - skb = __hci_cmd_sync(hu->hdev, - HCI_VS_UPDATE_UART_HCI_BAUDRATE, - sizeof(speed_le), &speed_le, - HCI_INIT_TIMEOUT); - if (!IS_ERR(skb)) { - kfree_skb(skb); - serdev_device_set_baudrate(serdev, speed); - } - } - err = download_firmware(lldev); if (!err) break; @@ -677,7 +656,25 @@ static int ll_setup(struct hci_uart *hu) } /* Operational speed if any */ + if (hu->oper_speed) + speed = hu->oper_speed; + else if (hu->proto->oper_speed) + speed = hu->proto->oper_speed; + else + speed = 0; + + if (speed) { + __le32 speed_le = cpu_to_le32(speed); + struct sk_buff *skb; + skb = __hci_cmd_sync(hu->hdev, HCI_VS_UPDATE_UART_HCI_BAUDRATE, + sizeof(speed_le), &speed_le, + HCI_INIT_TIMEOUT); + if (!IS_ERR(skb)) { + kfree_skb(skb); + serdev_device_set_baudrate(serdev, speed); + } + } return 0; } diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 48a224a6b178..bc19d6c16aaa 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -933,6 +933,9 @@ static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf) struct freq_attr *fattr = to_attr(attr); ssize_t ret; + if (!fattr->show) + return -EIO; + down_read(&policy->rwsem); ret = fattr->show(policy, buf); up_read(&policy->rwsem); @@ -947,6 +950,9 @@ static ssize_t store(struct kobject *kobj, struct attribute *attr, struct freq_attr *fattr = to_attr(attr); ssize_t ret = -EINVAL; + if (!fattr->store) + return -EIO; + /* * cpus_read_trylock() is used here to work around a circular lock * dependency problem with respect to the cpufreq_register_driver(). diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index f87f6495652f..eb9782fc93fe 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -2700,21 +2700,18 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv) } ret = -ENOMEM; - cc->io_queue = alloc_workqueue("kcryptd_io/%s", - WQ_HIGHPRI | WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM, - 1, devname); + cc->io_queue = alloc_workqueue("kcryptd_io/%s", WQ_MEM_RECLAIM, 1, devname); if (!cc->io_queue) { ti->error = "Couldn't create kcryptd io queue"; goto bad; } if (test_bit(DM_CRYPT_SAME_CPU, &cc->flags)) - cc->crypt_queue = alloc_workqueue("kcryptd/%s", - WQ_HIGHPRI | WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM, + cc->crypt_queue = alloc_workqueue("kcryptd/%s", WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM, 1, devname); else cc->crypt_queue = alloc_workqueue("kcryptd/%s", - WQ_HIGHPRI | WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM | WQ_UNBOUND, + WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM | WQ_UNBOUND, num_online_cpus(), devname); if (!cc->crypt_queue) { ti->error = "Couldn't create kcryptd queue"; diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 299c7b1c9718..8a62c920bb65 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -191,7 +191,7 @@ static void * r10buf_pool_alloc(gfp_t gfp_flags, void *data) out_free_pages: while (--j >= 0) - resync_free_pages(&rps[j * 2]); + resync_free_pages(&rps[j]); j = 0; out_free_bio: diff --git a/drivers/media/platform/vivid/vivid-kthread-cap.c b/drivers/media/platform/vivid/vivid-kthread-cap.c index 003319d7816d..31f78d6a05a4 100644 --- a/drivers/media/platform/vivid/vivid-kthread-cap.c +++ b/drivers/media/platform/vivid/vivid-kthread-cap.c @@ -796,7 +796,11 @@ static int vivid_thread_vid_cap(void *data) if (kthread_should_stop()) break; - mutex_lock(&dev->mutex); + if (!mutex_trylock(&dev->mutex)) { + schedule_timeout_uninterruptible(1); + continue; + } + cur_jiffies = jiffies; if (dev->cap_seq_resync) { dev->jiffies_vid_cap = cur_jiffies; @@ -956,8 +960,6 @@ void vivid_stop_generating_vid_cap(struct vivid_dev *dev, bool *pstreaming) /* shutdown control thread */ vivid_grab_controls(dev, false); - mutex_unlock(&dev->mutex); kthread_stop(dev->kthread_vid_cap); dev->kthread_vid_cap = NULL; - mutex_lock(&dev->mutex); } diff --git a/drivers/media/platform/vivid/vivid-kthread-out.c b/drivers/media/platform/vivid/vivid-kthread-out.c index ce5bcda2348c..1e165a6a2207 100644 --- a/drivers/media/platform/vivid/vivid-kthread-out.c +++ b/drivers/media/platform/vivid/vivid-kthread-out.c @@ -143,7 +143,11 @@ static int vivid_thread_vid_out(void *data) if (kthread_should_stop()) break; - mutex_lock(&dev->mutex); + if (!mutex_trylock(&dev->mutex)) { + schedule_timeout_uninterruptible(1); + continue; + } + cur_jiffies = jiffies; if (dev->out_seq_resync) { dev->jiffies_vid_out = cur_jiffies; @@ -301,8 +305,6 @@ void vivid_stop_generating_vid_out(struct vivid_dev *dev, bool *pstreaming) /* shutdown control thread */ vivid_grab_controls(dev, false); - mutex_unlock(&dev->mutex); kthread_stop(dev->kthread_vid_out); dev->kthread_vid_out = NULL; - mutex_lock(&dev->mutex); } diff --git a/drivers/media/platform/vivid/vivid-sdr-cap.c b/drivers/media/platform/vivid/vivid-sdr-cap.c index 9acc709b0740..2b7522e16efc 100644 --- a/drivers/media/platform/vivid/vivid-sdr-cap.c +++ b/drivers/media/platform/vivid/vivid-sdr-cap.c @@ -141,7 +141,11 @@ static int vivid_thread_sdr_cap(void *data) if (kthread_should_stop()) break; - mutex_lock(&dev->mutex); + if (!mutex_trylock(&dev->mutex)) { + schedule_timeout_uninterruptible(1); + continue; + } + cur_jiffies = jiffies; if (dev->sdr_cap_seq_resync) { dev->jiffies_sdr_cap = cur_jiffies; @@ -303,10 +307,8 @@ static void sdr_cap_stop_streaming(struct vb2_queue *vq) } /* shutdown control thread */ - mutex_unlock(&dev->mutex); kthread_stop(dev->kthread_sdr_cap); dev->kthread_sdr_cap = NULL; - mutex_lock(&dev->mutex); } static void sdr_cap_buf_request_complete(struct vb2_buffer *vb) diff --git a/drivers/media/platform/vivid/vivid-vid-cap.c b/drivers/media/platform/vivid/vivid-vid-cap.c index 8cbaa0c998ed..2d030732feac 100644 --- a/drivers/media/platform/vivid/vivid-vid-cap.c +++ b/drivers/media/platform/vivid/vivid-vid-cap.c @@ -223,9 +223,6 @@ static int vid_cap_start_streaming(struct vb2_queue *vq, unsigned count) if (vb2_is_streaming(&dev->vb_vid_out_q)) dev->can_loop_video = vivid_vid_can_loop(dev); - if (dev->kthread_vid_cap) - return 0; - dev->vid_cap_seq_count = 0; dprintk(dev, 1, "%s\n", __func__); for (i = 0; i < VIDEO_MAX_FRAME; i++) diff --git a/drivers/media/platform/vivid/vivid-vid-out.c b/drivers/media/platform/vivid/vivid-vid-out.c index 148b663a6075..a0364ac497f9 100644 --- a/drivers/media/platform/vivid/vivid-vid-out.c +++ b/drivers/media/platform/vivid/vivid-vid-out.c @@ -161,9 +161,6 @@ static int vid_out_start_streaming(struct vb2_queue *vq, unsigned count) if (vb2_is_streaming(&dev->vb_vid_cap_q)) dev->can_loop_video = vivid_vid_can_loop(dev); - if (dev->kthread_vid_out) - return 0; - dev->vid_out_seq_count = 0; dprintk(dev, 1, "%s\n", __func__); if (dev->start_streaming_error) { diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 37a850421fbb..c683a244b9fa 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -1598,8 +1598,7 @@ static void imon_incoming_packet(struct imon_context *ictx, spin_unlock_irqrestore(&ictx->kc_lock, flags); /* send touchscreen events through input subsystem if touchpad data */ - if (ictx->display_type == IMON_DISPLAY_TYPE_VGA && len == 8 && - buf[7] == 0x86) { + if (ictx->touch && len == 8 && buf[7] == 0x86) { imon_touch_event(ictx, buf); return; diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index 3fc9829a9233..f9616158bcf4 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -564,7 +564,7 @@ static int mceusb_cmd_datasize(u8 cmd, u8 subcmd) datasize = 4; break; case MCE_CMD_G_REVISION: - datasize = 2; + datasize = 4; break; case MCE_RSP_EQWAKESUPPORT: case MCE_RSP_GETWAKESOURCE: @@ -600,14 +600,9 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, u8 *buf, int buf_len, char *inout; u8 cmd, subcmd, *data; struct device *dev = ir->dev; - int start, skip = 0; u32 carrier, period; - /* skip meaningless 0xb1 0x60 header bytes on orig receiver */ - if (ir->flags.microsoft_gen1 && !out && !offset) - skip = 2; - - if (len <= skip) + if (offset < 0 || offset >= buf_len) return; dev_dbg(dev, "%cx data[%d]: %*ph (len=%d sz=%d)", @@ -616,11 +611,32 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, u8 *buf, int buf_len, inout = out ? "Request" : "Got"; - start = offset + skip; - cmd = buf[start] & 0xff; - subcmd = buf[start + 1] & 0xff; - data = buf + start + 2; + cmd = buf[offset]; + subcmd = (offset + 1 < buf_len) ? buf[offset + 1] : 0; + data = &buf[offset] + 2; + + /* Trace meaningless 0xb1 0x60 header bytes on original receiver */ + if (ir->flags.microsoft_gen1 && !out && !offset) { + dev_dbg(dev, "MCE gen 1 header"); + return; + } + + /* Trace IR data header or trailer */ + if (cmd != MCE_CMD_PORT_IR && + (cmd & MCE_PORT_MASK) == MCE_COMMAND_IRDATA) { + if (cmd == MCE_IRDATA_TRAILER) + dev_dbg(dev, "End of raw IR data"); + else + dev_dbg(dev, "Raw IR data, %d pulse/space samples", + cmd & MCE_PACKET_LENGTH_MASK); + return; + } + + /* Unexpected end of buffer? */ + if (offset + len > buf_len) + return; + /* Decode MCE command/response */ switch (cmd) { case MCE_CMD_NULL: if (subcmd == MCE_CMD_NULL) @@ -644,7 +660,7 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, u8 *buf, int buf_len, dev_dbg(dev, "Get hw/sw rev?"); else dev_dbg(dev, "hw/sw rev %*ph", - 4, &buf[start + 2]); + 4, &buf[offset + 2]); break; case MCE_CMD_RESUME: dev_dbg(dev, "Device resume requested"); @@ -746,13 +762,6 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, u8 *buf, int buf_len, default: break; } - - if (cmd == MCE_IRDATA_TRAILER) - dev_dbg(dev, "End of raw IR data"); - else if ((cmd != MCE_CMD_PORT_IR) && - ((cmd & MCE_PORT_MASK) == MCE_COMMAND_IRDATA)) - dev_dbg(dev, "Raw IR data, %d pulse/space samples", - cmd & MCE_PACKET_LENGTH_MASK); #endif } @@ -1136,32 +1145,62 @@ static int mceusb_set_rx_carrier_report(struct rc_dev *dev, int enable) } /* + * Handle PORT_SYS/IR command response received from the MCE device. + * + * Assumes single response with all its data (not truncated) + * in buf_in[]. The response itself determines its total length + * (mceusb_cmd_datasize() + 2) and hence the minimum size of buf_in[]. + * * We don't do anything but print debug spew for many of the command bits * we receive from the hardware, but some of them are useful information * we want to store so that we can use them. */ -static void mceusb_handle_command(struct mceusb_dev *ir, int index) +static void mceusb_handle_command(struct mceusb_dev *ir, u8 *buf_in) { + u8 cmd = buf_in[0]; + u8 subcmd = buf_in[1]; + u8 *hi = &buf_in[2]; /* read only when required */ + u8 *lo = &buf_in[3]; /* read only when required */ struct ir_raw_event rawir = {}; - u8 hi = ir->buf_in[index + 1] & 0xff; - u8 lo = ir->buf_in[index + 2] & 0xff; u32 carrier_cycles; u32 cycles_fix; - switch (ir->buf_in[index]) { - /* the one and only 5-byte return value command */ - case MCE_RSP_GETPORTSTATUS: - if ((ir->buf_in[index + 4] & 0xff) == 0x00) - ir->txports_cabled |= 1 << hi; - break; + if (cmd == MCE_CMD_PORT_SYS) { + switch (subcmd) { + /* the one and only 5-byte return value command */ + case MCE_RSP_GETPORTSTATUS: + if (buf_in[5] == 0) + ir->txports_cabled |= 1 << *hi; + break; + + /* 1-byte return value commands */ + case MCE_RSP_EQEMVER: + ir->emver = *hi; + break; + + /* No return value commands */ + case MCE_RSP_CMD_ILLEGAL: + ir->need_reset = true; + break; + + default: + break; + } + + return; + } + if (cmd != MCE_CMD_PORT_IR) + return; + + switch (subcmd) { /* 2-byte return value commands */ case MCE_RSP_EQIRTIMEOUT: - ir->rc->timeout = US_TO_NS((hi << 8 | lo) * MCE_TIME_UNIT); + ir->rc->timeout = US_TO_NS((*hi << 8 | *lo) * MCE_TIME_UNIT); break; case MCE_RSP_EQIRNUMPORTS: - ir->num_txports = hi; - ir->num_rxports = lo; + ir->num_txports = *hi; + ir->num_rxports = *lo; break; case MCE_RSP_EQIRRXCFCNT: /* @@ -1174,7 +1213,7 @@ static void mceusb_handle_command(struct mceusb_dev *ir, int index) */ if (ir->carrier_report_enabled && ir->learning_active && ir->pulse_tunit > 0) { - carrier_cycles = (hi << 8 | lo); + carrier_cycles = (*hi << 8 | *lo); /* * Adjust carrier cycle count by adding * 1 missed count per pulse "on" @@ -1192,24 +1231,24 @@ static void mceusb_handle_command(struct mceusb_dev *ir, int index) break; /* 1-byte return value commands */ - case MCE_RSP_EQEMVER: - ir->emver = hi; - break; case MCE_RSP_EQIRTXPORTS: - ir->tx_mask = hi; + ir->tx_mask = *hi; break; case MCE_RSP_EQIRRXPORTEN: - ir->learning_active = ((hi & 0x02) == 0x02); - if (ir->rxports_active != hi) { + ir->learning_active = ((*hi & 0x02) == 0x02); + if (ir->rxports_active != *hi) { dev_info(ir->dev, "%s-range (0x%x) receiver active", - ir->learning_active ? "short" : "long", hi); - ir->rxports_active = hi; + ir->learning_active ? "short" : "long", *hi); + ir->rxports_active = *hi; } break; + + /* No return value commands */ case MCE_RSP_CMD_ILLEGAL: case MCE_RSP_TX_TIMEOUT: ir->need_reset = true; break; + default: break; } @@ -1235,7 +1274,8 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len) ir->rem = mceusb_cmd_datasize(ir->cmd, ir->buf_in[i]); mceusb_dev_printdata(ir, ir->buf_in, buf_len, i - 1, ir->rem + 2, false); - mceusb_handle_command(ir, i); + if (i + ir->rem < buf_len) + mceusb_handle_command(ir, &ir->buf_in[i - 1]); ir->parser_state = CMD_DATA; break; case PARSE_IRDATA: @@ -1264,15 +1304,22 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len) ir->rem--; break; case CMD_HEADER: - /* decode mce packets of the form (84),AA,BB,CC,DD */ - /* IR data packets can span USB messages - rem */ ir->cmd = ir->buf_in[i]; if ((ir->cmd == MCE_CMD_PORT_IR) || ((ir->cmd & MCE_PORT_MASK) != MCE_COMMAND_IRDATA)) { + /* + * got PORT_SYS, PORT_IR, or unknown + * command response prefix + */ ir->parser_state = SUBCMD; continue; } + /* + * got IR data prefix (0x80 + num_bytes) + * decode MCE packets of the form {0x83, AA, BB, CC} + * IR data packets can span USB messages + */ ir->rem = (ir->cmd & MCE_PACKET_LENGTH_MASK); mceusb_dev_printdata(ir, ir->buf_in, buf_len, i, ir->rem + 1, false); @@ -1296,6 +1343,14 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len) if (ir->parser_state != CMD_HEADER && !ir->rem) ir->parser_state = CMD_HEADER; } + + /* + * Accept IR data spanning multiple rx buffers. + * Reject MCE command response spanning multiple rx buffers. + */ + if (ir->parser_state != PARSE_IRDATA || !ir->rem) + ir->parser_state = CMD_HEADER; + if (event) { dev_dbg(ir->dev, "processed IR data"); ir_raw_event_handle(ir->rc); diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c index 1826ff825c2e..1a801dc286f8 100644 --- a/drivers/media/usb/b2c2/flexcop-usb.c +++ b/drivers/media/usb/b2c2/flexcop-usb.c @@ -538,6 +538,9 @@ static int flexcop_usb_probe(struct usb_interface *intf, struct flexcop_device *fc = NULL; int ret; + if (intf->cur_altsetting->desc.bNumEndpoints < 1) + return -ENODEV; + if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) { err("out of memory\n"); return -ENOMEM; diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c index f02fa0a67aa4..fac19ec46089 100644 --- a/drivers/media/usb/dvb-usb/cxusb.c +++ b/drivers/media/usb/dvb-usb/cxusb.c @@ -521,7 +521,8 @@ static int cxusb_rc_query(struct dvb_usb_device *d) { u8 ircode[4]; - cxusb_ctrl_msg(d, CMD_GET_IR_CODE, NULL, 0, ircode, 4); + if (cxusb_ctrl_msg(d, CMD_GET_IR_CODE, NULL, 0, ircode, 4) < 0) + return 0; if (ircode[2] || ircode[3]) rc_keydown(d->rc_dev, RC_PROTO_NEC, diff --git a/drivers/media/usb/usbvision/usbvision-video.c b/drivers/media/usb/usbvision/usbvision-video.c index cdc66adda755..93d36aab824f 100644 --- a/drivers/media/usb/usbvision/usbvision-video.c +++ b/drivers/media/usb/usbvision/usbvision-video.c @@ -314,6 +314,10 @@ static int usbvision_v4l2_open(struct file *file) if (mutex_lock_interruptible(&usbvision->v4l2_lock)) return -ERESTARTSYS; + if (usbvision->remove_pending) { + err_code = -ENODEV; + goto unlock; + } if (usbvision->user) { err_code = -EBUSY; } else { @@ -377,6 +381,7 @@ unlock: static int usbvision_v4l2_close(struct file *file) { struct usb_usbvision *usbvision = video_drvdata(file); + int r; PDEBUG(DBG_IO, "close"); @@ -391,9 +396,10 @@ static int usbvision_v4l2_close(struct file *file) usbvision_scratch_free(usbvision); usbvision->user--; + r = usbvision->remove_pending; mutex_unlock(&usbvision->v4l2_lock); - if (usbvision->remove_pending) { + if (r) { printk(KERN_INFO "%s: Final disconnect\n", __func__); usbvision_release(usbvision); return 0; @@ -453,6 +459,9 @@ static int vidioc_querycap(struct file *file, void *priv, { struct usb_usbvision *usbvision = video_drvdata(file); + if (!usbvision->dev) + return -ENODEV; + strscpy(vc->driver, "USBVision", sizeof(vc->driver)); strscpy(vc->card, usbvision_device_data[usbvision->dev_model].model_string, @@ -1061,6 +1070,11 @@ static int usbvision_radio_open(struct file *file) if (mutex_lock_interruptible(&usbvision->v4l2_lock)) return -ERESTARTSYS; + + if (usbvision->remove_pending) { + err_code = -ENODEV; + goto out; + } err_code = v4l2_fh_open(file); if (err_code) goto out; @@ -1093,21 +1107,24 @@ out: static int usbvision_radio_close(struct file *file) { struct usb_usbvision *usbvision = video_drvdata(file); + int r; PDEBUG(DBG_IO, ""); mutex_lock(&usbvision->v4l2_lock); /* Set packet size to 0 */ usbvision->iface_alt = 0; - usb_set_interface(usbvision->dev, usbvision->iface, - usbvision->iface_alt); + if (usbvision->dev) + usb_set_interface(usbvision->dev, usbvision->iface, + usbvision->iface_alt); usbvision_audio_off(usbvision); usbvision->radio = 0; usbvision->user--; + r = usbvision->remove_pending; mutex_unlock(&usbvision->v4l2_lock); - if (usbvision->remove_pending) { + if (r) { printk(KERN_INFO "%s: Final disconnect\n", __func__); v4l2_fh_release(file); usbvision_release(usbvision); @@ -1539,6 +1556,7 @@ err_usb: static void usbvision_disconnect(struct usb_interface *intf) { struct usb_usbvision *usbvision = to_usbvision(usb_get_intfdata(intf)); + int u; PDEBUG(DBG_PROBE, ""); @@ -1555,13 +1573,14 @@ static void usbvision_disconnect(struct usb_interface *intf) v4l2_device_disconnect(&usbvision->v4l2_dev); usbvision_i2c_unregister(usbvision); usbvision->remove_pending = 1; /* Now all ISO data will be ignored */ + u = usbvision->user; usb_put_dev(usbvision->dev); usbvision->dev = NULL; /* USB device is no more */ mutex_unlock(&usbvision->v4l2_lock); - if (usbvision->user) { + if (u) { printk(KERN_INFO "%s: In use, disconnect pending\n", __func__); wake_up_interruptible(&usbvision->wait_frame); diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c index 66ee168ddc7e..428235ca2635 100644 --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c @@ -2151,6 +2151,20 @@ static int uvc_probe(struct usb_interface *intf, sizeof(dev->name) - len); } + /* Initialize the media device. */ +#ifdef CONFIG_MEDIA_CONTROLLER + dev->mdev.dev = &intf->dev; + strscpy(dev->mdev.model, dev->name, sizeof(dev->mdev.model)); + if (udev->serial) + strscpy(dev->mdev.serial, udev->serial, + sizeof(dev->mdev.serial)); + usb_make_path(udev, dev->mdev.bus_info, sizeof(dev->mdev.bus_info)); + dev->mdev.hw_revision = le16_to_cpu(udev->descriptor.bcdDevice); + media_device_init(&dev->mdev); + + dev->vdev.mdev = &dev->mdev; +#endif + /* Parse the Video Class control descriptor. */ if (uvc_parse_control(dev) < 0) { uvc_trace(UVC_TRACE_PROBE, "Unable to parse UVC " @@ -2171,19 +2185,7 @@ static int uvc_probe(struct usb_interface *intf, "linux-uvc-devel mailing list.\n"); } - /* Initialize the media device and register the V4L2 device. */ -#ifdef CONFIG_MEDIA_CONTROLLER - dev->mdev.dev = &intf->dev; - strscpy(dev->mdev.model, dev->name, sizeof(dev->mdev.model)); - if (udev->serial) - strscpy(dev->mdev.serial, udev->serial, - sizeof(dev->mdev.serial)); - usb_make_path(udev, dev->mdev.bus_info, sizeof(dev->mdev.bus_info)); - dev->mdev.hw_revision = le16_to_cpu(udev->descriptor.bcdDevice); - media_device_init(&dev->mdev); - - dev->vdev.mdev = &dev->mdev; -#endif + /* Register the V4L2 device. */ if (v4l2_device_register(&intf->dev, &dev->vdev) < 0) goto error; diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index a0b4d265c6eb..347bb92e4130 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -3490,7 +3490,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev, struct ath10k_pci *ar_pci; enum ath10k_hw_rev hw_rev; struct ath10k_bus_params bus_params = {}; - bool pci_ps; + bool pci_ps, is_qca988x = false; int (*pci_soft_reset)(struct ath10k *ar); int (*pci_hard_reset)(struct ath10k *ar); u32 (*targ_cpu_to_ce_addr)(struct ath10k *ar, u32 addr); @@ -3500,6 +3500,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev, case QCA988X_2_0_DEVICE_ID: hw_rev = ATH10K_HW_QCA988X; pci_ps = false; + is_qca988x = true; pci_soft_reset = ath10k_pci_warm_reset; pci_hard_reset = ath10k_pci_qca988x_chip_reset; targ_cpu_to_ce_addr = ath10k_pci_qca988x_targ_cpu_to_ce_addr; @@ -3619,25 +3620,34 @@ static int ath10k_pci_probe(struct pci_dev *pdev, goto err_deinit_irq; } + bus_params.dev_type = ATH10K_DEV_TYPE_LL; + bus_params.link_can_suspend = true; + /* Read CHIP_ID before reset to catch QCA9880-AR1A v1 devices that + * fall off the bus during chip_reset. These chips have the same pci + * device id as the QCA9880 BR4A or 2R4E. So that's why the check. + */ + if (is_qca988x) { + bus_params.chip_id = + ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS); + if (bus_params.chip_id != 0xffffffff) { + if (!ath10k_pci_chip_is_supported(pdev->device, + bus_params.chip_id)) + goto err_unsupported; + } + } + ret = ath10k_pci_chip_reset(ar); if (ret) { ath10k_err(ar, "failed to reset chip: %d\n", ret); goto err_free_irq; } - bus_params.dev_type = ATH10K_DEV_TYPE_LL; - bus_params.link_can_suspend = true; bus_params.chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS); - if (bus_params.chip_id == 0xffffffff) { - ath10k_err(ar, "failed to get chip id\n"); - goto err_free_irq; - } + if (bus_params.chip_id == 0xffffffff) + goto err_unsupported; - if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id)) { - ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n", - pdev->device, bus_params.chip_id); + if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id)) goto err_free_irq; - } ret = ath10k_core_register(ar, &bus_params); if (ret) { @@ -3647,6 +3657,10 @@ static int ath10k_pci_probe(struct pci_dev *pdev, return 0; +err_unsupported: + ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n", + pdev->device, bus_params.chip_id); + err_free_irq: ath10k_pci_free_irq(ar); ath10k_pci_rx_retry_sync(ar); diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c index 3b63b6257c43..545ac1f06997 100644 --- a/drivers/net/wireless/ath/ath10k/qmi.c +++ b/drivers/net/wireless/ath/ath10k/qmi.c @@ -581,22 +581,29 @@ static int ath10k_qmi_host_cap_send_sync(struct ath10k_qmi *qmi) { struct wlfw_host_cap_resp_msg_v01 resp = {}; struct wlfw_host_cap_req_msg_v01 req = {}; + struct qmi_elem_info *req_ei; struct ath10k *ar = qmi->ar; + struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar); struct qmi_txn txn; int ret; req.daemon_support_valid = 1; req.daemon_support = 0; - ret = qmi_txn_init(&qmi->qmi_hdl, &txn, - wlfw_host_cap_resp_msg_v01_ei, &resp); + ret = qmi_txn_init(&qmi->qmi_hdl, &txn, wlfw_host_cap_resp_msg_v01_ei, + &resp); if (ret < 0) goto out; + if (test_bit(ATH10K_SNOC_FLAG_8BIT_HOST_CAP_QUIRK, &ar_snoc->flags)) + req_ei = wlfw_host_cap_8bit_req_msg_v01_ei; + else + req_ei = wlfw_host_cap_req_msg_v01_ei; + ret = qmi_send_request(&qmi->qmi_hdl, NULL, &txn, QMI_WLFW_HOST_CAP_REQ_V01, WLFW_HOST_CAP_REQ_MSG_V01_MAX_MSG_LEN, - wlfw_host_cap_req_msg_v01_ei, &req); + req_ei, &req); if (ret < 0) { qmi_txn_cancel(&txn); ath10k_err(ar, "failed to send host capability request: %d\n", ret); diff --git a/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.c b/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.c index 1fe05c6218c3..86fcf4e1de5f 100644 --- a/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.c +++ b/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.c @@ -1988,6 +1988,28 @@ struct qmi_elem_info wlfw_host_cap_req_msg_v01_ei[] = { {} }; +struct qmi_elem_info wlfw_host_cap_8bit_req_msg_v01_ei[] = { + { + .data_type = QMI_OPT_FLAG, + .elem_len = 1, + .elem_size = sizeof(u8), + .array_type = NO_ARRAY, + .tlv_type = 0x10, + .offset = offsetof(struct wlfw_host_cap_req_msg_v01, + daemon_support_valid), + }, + { + .data_type = QMI_UNSIGNED_1_BYTE, + .elem_len = 1, + .elem_size = sizeof(u8), + .array_type = NO_ARRAY, + .tlv_type = 0x10, + .offset = offsetof(struct wlfw_host_cap_req_msg_v01, + daemon_support), + }, + {} +}; + struct qmi_elem_info wlfw_host_cap_resp_msg_v01_ei[] = { { .data_type = QMI_STRUCT, diff --git a/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.h b/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.h index bca1186e1560..4d107e1364a8 100644 --- a/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.h +++ b/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.h @@ -575,6 +575,7 @@ struct wlfw_host_cap_req_msg_v01 { #define WLFW_HOST_CAP_REQ_MSG_V01_MAX_MSG_LEN 189 extern struct qmi_elem_info wlfw_host_cap_req_msg_v01_ei[]; +extern struct qmi_elem_info wlfw_host_cap_8bit_req_msg_v01_ei[]; struct wlfw_host_cap_resp_msg_v01 { struct qmi_response_type_v01 resp; diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c index b491361e6ed4..fc15a0037f0e 100644 --- a/drivers/net/wireless/ath/ath10k/snoc.c +++ b/drivers/net/wireless/ath/ath10k/snoc.c @@ -1261,6 +1261,15 @@ out: return ret; } +static void ath10k_snoc_quirks_init(struct ath10k *ar) +{ + struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar); + struct device *dev = &ar_snoc->dev->dev; + + if (of_property_read_bool(dev->of_node, "qcom,snoc-host-cap-8bit-quirk")) + set_bit(ATH10K_SNOC_FLAG_8BIT_HOST_CAP_QUIRK, &ar_snoc->flags); +} + int ath10k_snoc_fw_indication(struct ath10k *ar, u64 type) { struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar); @@ -1678,6 +1687,8 @@ static int ath10k_snoc_probe(struct platform_device *pdev) ar->ce_priv = &ar_snoc->ce; msa_size = drv_data->msa_size; + ath10k_snoc_quirks_init(ar); + ret = ath10k_snoc_resource_init(ar); if (ret) { ath10k_warn(ar, "failed to initialize resource: %d\n", ret); diff --git a/drivers/net/wireless/ath/ath10k/snoc.h b/drivers/net/wireless/ath/ath10k/snoc.h index d62f53501fbb..9db823e46314 100644 --- a/drivers/net/wireless/ath/ath10k/snoc.h +++ b/drivers/net/wireless/ath/ath10k/snoc.h @@ -63,6 +63,7 @@ enum ath10k_snoc_flags { ATH10K_SNOC_FLAG_REGISTERED, ATH10K_SNOC_FLAG_UNREGISTERING, ATH10K_SNOC_FLAG_RECOVERY, + ATH10K_SNOC_FLAG_8BIT_HOST_CAP_QUIRK, }; struct ath10k_snoc { diff --git a/drivers/net/wireless/ath/ath10k/usb.c b/drivers/net/wireless/ath/ath10k/usb.c index e1420f67f776..9ebe74ee4aef 100644 --- a/drivers/net/wireless/ath/ath10k/usb.c +++ b/drivers/net/wireless/ath/ath10k/usb.c @@ -38,6 +38,10 @@ ath10k_usb_alloc_urb_from_pipe(struct ath10k_usb_pipe *pipe) struct ath10k_urb_context *urb_context = NULL; unsigned long flags; + /* bail if this pipe is not initialized */ + if (!pipe->ar_usb) + return NULL; + spin_lock_irqsave(&pipe->ar_usb->cs_lock, flags); if (!list_empty(&pipe->urb_list_head)) { urb_context = list_first_entry(&pipe->urb_list_head, @@ -55,6 +59,10 @@ static void ath10k_usb_free_urb_to_pipe(struct ath10k_usb_pipe *pipe, { unsigned long flags; + /* bail if this pipe is not initialized */ + if (!pipe->ar_usb) + return; + spin_lock_irqsave(&pipe->ar_usb->cs_lock, flags); pipe->urb_cnt++; diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 2b29bf4730f6..b4885a700296 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -4183,7 +4183,7 @@ static void ar9003_hw_thermometer_apply(struct ath_hw *ah) static void ar9003_hw_thermo_cal_apply(struct ath_hw *ah) { - u32 data, ko, kg; + u32 data = 0, ko, kg; if (!AR_SREV_9462_20_OR_LATER(ah)) return; diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c index 04bc488385e6..4af012968cb6 100644 --- a/drivers/staging/comedi/drivers/usbduxfast.c +++ b/drivers/staging/comedi/drivers/usbduxfast.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2004-2014 Bernd Porr, mail@berndporr.me.uk + * Copyright (C) 2004-2019 Bernd Porr, mail@berndporr.me.uk */ /* @@ -8,7 +8,7 @@ * Description: University of Stirling USB DAQ & INCITE Technology Limited * Devices: [ITL] USB-DUX-FAST (usbduxfast) * Author: Bernd Porr - * Updated: 10 Oct 2014 + * Updated: 16 Nov 2019 * Status: stable */ @@ -22,6 +22,7 @@ * * * Revision history: + * 1.0: Fixed a rounding error in usbduxfast_ai_cmdtest * 0.9: Dropping the first data packet which seems to be from the last transfer. * Buffer overflows in the FX2 are handed over to comedi. * 0.92: Dropping now 4 packets. The quad buffer has to be emptied. @@ -350,6 +351,7 @@ static int usbduxfast_ai_cmdtest(struct comedi_device *dev, struct comedi_cmd *cmd) { int err = 0; + int err2 = 0; unsigned int steps; unsigned int arg; @@ -399,11 +401,16 @@ static int usbduxfast_ai_cmdtest(struct comedi_device *dev, */ steps = (cmd->convert_arg * 30) / 1000; if (cmd->chanlist_len != 1) - err |= comedi_check_trigger_arg_min(&steps, - MIN_SAMPLING_PERIOD); - err |= comedi_check_trigger_arg_max(&steps, MAX_SAMPLING_PERIOD); - arg = (steps * 1000) / 30; - err |= comedi_check_trigger_arg_is(&cmd->convert_arg, arg); + err2 |= comedi_check_trigger_arg_min(&steps, + MIN_SAMPLING_PERIOD); + else + err2 |= comedi_check_trigger_arg_min(&steps, 1); + err2 |= comedi_check_trigger_arg_max(&steps, MAX_SAMPLING_PERIOD); + if (err2) { + err |= err2; + arg = (steps * 1000) / 30; + err |= comedi_check_trigger_arg_is(&cmd->convert_arg, arg); + } if (cmd->stop_src == TRIG_COUNT) err |= comedi_check_trigger_arg_min(&cmd->stop_arg, 1); diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index ac92725458b5..ba1eaabc7796 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -164,7 +164,12 @@ static int appledisplay_bl_get_brightness(struct backlight_device *bd) 0, pdata->msgdata, 2, ACD_USB_TIMEOUT); - brightness = pdata->msgdata[1]; + if (retval < 2) { + if (retval >= 0) + retval = -EMSGSIZE; + } else { + brightness = pdata->msgdata[1]; + } mutex_unlock(&pdata->sysfslock); if (retval < 0) @@ -299,6 +304,7 @@ error: if (pdata) { if (pdata->urb) { usb_kill_urb(pdata->urb); + cancel_delayed_work_sync(&pdata->work); if (pdata->urbdata) usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN, pdata->urbdata, pdata->urb->transfer_dma); diff --git a/drivers/usb/misc/chaoskey.c b/drivers/usb/misc/chaoskey.c index 34e6cd6f40d3..87067c3d6109 100644 --- a/drivers/usb/misc/chaoskey.c +++ b/drivers/usb/misc/chaoskey.c @@ -384,13 +384,17 @@ static int _chaoskey_fill(struct chaoskey *dev) !dev->reading, (started ? NAK_TIMEOUT : ALEA_FIRST_TIMEOUT) ); - if (result < 0) + if (result < 0) { + usb_kill_urb(dev->urb); goto out; + } - if (result == 0) + if (result == 0) { result = -ETIMEDOUT; - else + usb_kill_urb(dev->urb); + } else { result = dev->valid; + } out: /* Let the device go back to sleep eventually */ usb_autopm_put_interface(dev->interface); @@ -526,7 +530,21 @@ static int chaoskey_suspend(struct usb_interface *interface, static int chaoskey_resume(struct usb_interface *interface) { + struct chaoskey *dev; + struct usb_device *udev = interface_to_usbdev(interface); + usb_dbg(interface, "resume"); + dev = usb_get_intfdata(interface); + + /* + * We may have lost power. + * In that case the device that needs a long time + * for the first requests needs an extended timeout + * again + */ + if (le16_to_cpu(udev->descriptor.idVendor) == ALEA_VENDOR_ID) + dev->reads_started = false; + return 0; } #else diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 979bef9bfb6b..f5143eedbc48 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -125,6 +125,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */ { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ + { USB_DEVICE(0x10C4, 0x83AA) }, /* Mark-10 Digital Force Gauge */ { USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */ { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */ { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */ diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 18110225d506..2ec4eeacebc7 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1833,10 +1833,6 @@ static int mos7720_startup(struct usb_serial *serial) product = le16_to_cpu(serial->dev->descriptor.idProduct); dev = serial->dev; - /* setting configuration feature to one */ - usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000); - if (product == MOSCHIP_DEVICE_ID_7715) { struct urb *urb = serial->port[0]->interrupt_in_urb; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index a698d46ba773..ab4bf8d6d7df 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -119,11 +119,15 @@ /* This driver also supports * ATEN UC2324 device using Moschip MCS7840 * ATEN UC2322 device using Moschip MCS7820 + * MOXA UPort 2210 device using Moschip MCS7820 */ #define USB_VENDOR_ID_ATENINTL 0x0557 #define ATENINTL_DEVICE_ID_UC2324 0x2011 #define ATENINTL_DEVICE_ID_UC2322 0x7820 +#define USB_VENDOR_ID_MOXA 0x110a +#define MOXA_DEVICE_ID_2210 0x2210 + /* Interrupt Routine Defines */ #define SERIAL_IIR_RLS 0x06 @@ -195,6 +199,7 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)}, + {USB_DEVICE(USB_VENDOR_ID_MOXA, MOXA_DEVICE_ID_2210)}, {} /* terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table); @@ -2020,6 +2025,7 @@ static int mos7840_probe(struct usb_serial *serial, const struct usb_device_id *id) { u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); + u16 vid = le16_to_cpu(serial->dev->descriptor.idVendor); u8 *buf; int device_type; @@ -2030,6 +2036,11 @@ static int mos7840_probe(struct usb_serial *serial, goto out; } + if (vid == USB_VENDOR_ID_MOXA && product == MOXA_DEVICE_ID_2210) { + device_type = MOSCHIP_DEVICE_ID_7820; + goto out; + } + buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL); if (!buf) return -ENOMEM; @@ -2279,11 +2290,6 @@ out: goto error; } else dev_dbg(&port->dev, "ZLP_REG5 Writing success status%d\n", status); - - /* setting configuration feature to one */ - usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - 0x03, 0x00, 0x01, 0x00, NULL, 0x00, - MOS_WDR_TIMEOUT); } return 0; error: diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 06ab016be0b6..e9491d400a24 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -197,6 +197,7 @@ static void option_instat_callback(struct urb *urb); #define DELL_PRODUCT_5804_MINICARD_ATT 0x819b /* Novatel E371 */ #define DELL_PRODUCT_5821E 0x81d7 +#define DELL_PRODUCT_5821E_ESIM 0x81e0 #define KYOCERA_VENDOR_ID 0x0c88 #define KYOCERA_PRODUCT_KPC650 0x17da @@ -1044,6 +1045,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5804_MINICARD_ATT, 0xff, 0xff, 0xff) }, { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5821E), .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5821E_ESIM), + .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) }, @@ -1990,6 +1993,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x13) }, { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x14) }, { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x1b) }, + { USB_DEVICE(0x0489, 0xe0b4), /* Foxconn T77W968 */ + .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, + { USB_DEVICE(0x0489, 0xe0b5), /* Foxconn T77W968 ESIM */ + .driver_info = RSVD(0) | RSVD(1) | RSVD(6) }, { USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 */ .driver_info = RSVD(4) | RSVD(5) | RSVD(6) }, { USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */ diff --git a/drivers/usb/usbip/Kconfig b/drivers/usb/usbip/Kconfig index 2f86b28fa3da..7bbae7a08642 100644 --- a/drivers/usb/usbip/Kconfig +++ b/drivers/usb/usbip/Kconfig @@ -4,6 +4,7 @@ config USBIP_CORE tristate "USB/IP support" depends on NET select USB_COMMON + select SGL_ALLOC ---help--- This enables pushing USB packets over IP to allow remote machines direct access to USB devices. It provides the diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c index 66edfeea68fe..e2b019532234 100644 --- a/drivers/usb/usbip/stub_rx.c +++ b/drivers/usb/usbip/stub_rx.c @@ -470,18 +470,50 @@ static void stub_recv_cmd_submit(struct stub_device *sdev, if (pipe == -1) return; + /* + * Smatch reported the error case where use_sg is true and buf_len is 0. + * In this case, It adds SDEV_EVENT_ERROR_MALLOC and stub_priv will be + * released by stub event handler and connection will be shut down. + */ priv = stub_priv_alloc(sdev, pdu); if (!priv) return; buf_len = (unsigned long long)pdu->u.cmd_submit.transfer_buffer_length; + if (use_sg && !buf_len) { + dev_err(&udev->dev, "sg buffer with zero length\n"); + goto err_malloc; + } + /* allocate urb transfer buffer, if needed */ if (buf_len) { if (use_sg) { sgl = sgl_alloc(buf_len, GFP_KERNEL, &nents); if (!sgl) goto err_malloc; + + /* Check if the server's HCD supports SG */ + if (!udev->bus->sg_tablesize) { + /* + * If the server's HCD doesn't support SG, break + * a single SG request into several URBs and map + * each SG list entry to corresponding URB + * buffer. The previously allocated SG list is + * stored in priv->sgl (If the server's HCD + * support SG, SG list is stored only in + * urb->sg) and it is used as an indicator that + * the server split single SG request into + * several URBs. Later, priv->sgl is used by + * stub_complete() and stub_send_ret_submit() to + * reassemble the divied URBs. + */ + support_sg = 0; + num_urbs = nents; + priv->completed_urbs = 0; + pdu->u.cmd_submit.transfer_flags &= + ~URB_DMA_MAP_SG; + } } else { buffer = kzalloc(buf_len, GFP_KERNEL); if (!buffer) @@ -489,24 +521,6 @@ static void stub_recv_cmd_submit(struct stub_device *sdev, } } - /* Check if the server's HCD supports SG */ - if (use_sg && !udev->bus->sg_tablesize) { - /* - * If the server's HCD doesn't support SG, break a single SG - * request into several URBs and map each SG list entry to - * corresponding URB buffer. The previously allocated SG - * list is stored in priv->sgl (If the server's HCD support SG, - * SG list is stored only in urb->sg) and it is used as an - * indicator that the server split single SG request into - * several URBs. Later, priv->sgl is used by stub_complete() and - * stub_send_ret_submit() to reassemble the divied URBs. - */ - support_sg = 0; - num_urbs = nents; - priv->completed_urbs = 0; - pdu->u.cmd_submit.transfer_flags &= ~URB_DMA_MAP_SG; - } - /* allocate urb array */ priv->num_urbs = num_urbs; priv->urbs = kmalloc_array(num_urbs, sizeof(*priv->urbs), GFP_KERNEL); diff --git a/fs/exec.c b/fs/exec.c index 555e93c7dec8..c27231234764 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1015,7 +1015,7 @@ static int exec_mmap(struct mm_struct *mm) /* Notify parent that we're no longer interested in the old VM */ tsk = current; old_mm = current->mm; - mm_release(tsk, old_mm); + exec_mm_release(tsk, old_mm); if (old_mm) { sync_mm_rss(old_mm); diff --git a/include/linux/compat.h b/include/linux/compat.h index 16dafd9f4b86..c4c389c7e1b4 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -410,8 +410,6 @@ struct compat_kexec_segment; struct compat_mq_attr; struct compat_msgbuf; -extern void compat_exit_robust_list(struct task_struct *curr); - #define BITS_PER_COMPAT_LONG (8*sizeof(compat_long_t)) #define BITS_TO_COMPAT_LONGS(bits) DIV_ROUND_UP(bits, BITS_PER_COMPAT_LONG) diff --git a/include/linux/futex.h b/include/linux/futex.h index ccaef0097785..5cc3fed27d4c 100644 --- a/include/linux/futex.h +++ b/include/linux/futex.h @@ -2,7 +2,9 @@ #ifndef _LINUX_FUTEX_H #define _LINUX_FUTEX_H +#include #include + #include struct inode; @@ -48,15 +50,35 @@ union futex_key { #define FUTEX_KEY_INIT (union futex_key) { .both = { .ptr = NULL } } #ifdef CONFIG_FUTEX -extern void exit_robust_list(struct task_struct *curr); +enum { + FUTEX_STATE_OK, + FUTEX_STATE_EXITING, + FUTEX_STATE_DEAD, +}; -long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout, - u32 __user *uaddr2, u32 val2, u32 val3); -#else -static inline void exit_robust_list(struct task_struct *curr) +static inline void futex_init_task(struct task_struct *tsk) { + tsk->robust_list = NULL; +#ifdef CONFIG_COMPAT + tsk->compat_robust_list = NULL; +#endif + INIT_LIST_HEAD(&tsk->pi_state_list); + tsk->pi_state_cache = NULL; + tsk->futex_state = FUTEX_STATE_OK; + mutex_init(&tsk->futex_exit_mutex); } +void futex_exit_recursive(struct task_struct *tsk); +void futex_exit_release(struct task_struct *tsk); +void futex_exec_release(struct task_struct *tsk); + +long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout, + u32 __user *uaddr2, u32 val2, u32 val3); +#else +static inline void futex_init_task(struct task_struct *tsk) { } +static inline void futex_exit_recursive(struct task_struct *tsk) { } +static inline void futex_exit_release(struct task_struct *tsk) { } +static inline void futex_exec_release(struct task_struct *tsk) { } static inline long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout, u32 __user *uaddr2, u32 val2, u32 val3) @@ -65,12 +87,4 @@ static inline long do_futex(u32 __user *uaddr, int op, u32 val, } #endif -#ifdef CONFIG_FUTEX_PI -extern void exit_pi_state_list(struct task_struct *curr); -#else -static inline void exit_pi_state_list(struct task_struct *curr) -{ -} -#endif - #endif diff --git a/include/linux/sched.h b/include/linux/sched.h index 67a1d86981a9..775503573ed7 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1054,6 +1054,8 @@ struct task_struct { #endif struct list_head pi_state_list; struct futex_pi_state *pi_state_cache; + struct mutex futex_exit_mutex; + unsigned int futex_state; #endif #ifdef CONFIG_PERF_EVENTS struct perf_event_context *perf_event_ctxp[perf_nr_task_contexts]; @@ -1442,7 +1444,6 @@ extern struct pid *cad_pid; */ #define PF_IDLE 0x00000002 /* I am an IDLE thread */ #define PF_EXITING 0x00000004 /* Getting shut down */ -#define PF_EXITPIDONE 0x00000008 /* PI exit done on shut down */ #define PF_VCPU 0x00000010 /* I'm a virtual CPU */ #define PF_WQ_WORKER 0x00000020 /* I'm a workqueue worker */ #define PF_FORKNOEXEC 0x00000040 /* Forked but didn't exec */ diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h index e6770012db18..c49257a3b510 100644 --- a/include/linux/sched/mm.h +++ b/include/linux/sched/mm.h @@ -117,8 +117,10 @@ extern struct mm_struct *get_task_mm(struct task_struct *task); * succeeds. */ extern struct mm_struct *mm_access(struct task_struct *task, unsigned int mode); -/* Remove the current tasks stale references to the old mm_struct */ -extern void mm_release(struct task_struct *, struct mm_struct *); +/* Remove the current tasks stale references to the old mm_struct on exit() */ +extern void exit_mm_release(struct task_struct *, struct mm_struct *); +/* Remove the current tasks stale references to the old mm_struct on exec() */ +extern void exec_mm_release(struct task_struct *, struct mm_struct *); #ifdef CONFIG_MEMCG extern void mm_update_next_owner(struct mm_struct *mm); diff --git a/kernel/exit.c b/kernel/exit.c index a46a50d67002..d351fd09e739 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -437,7 +437,7 @@ static void exit_mm(void) struct mm_struct *mm = current->mm; struct core_state *core_state; - mm_release(current, mm); + exit_mm_release(current, mm); if (!mm) return; sync_mm_rss(mm); @@ -746,32 +746,12 @@ void __noreturn do_exit(long code) */ if (unlikely(tsk->flags & PF_EXITING)) { pr_alert("Fixing recursive fault but reboot is needed!\n"); - /* - * We can do this unlocked here. The futex code uses - * this flag just to verify whether the pi state - * cleanup has been done or not. In the worst case it - * loops once more. We pretend that the cleanup was - * done as there is no way to return. Either the - * OWNER_DIED bit is set by now or we push the blocked - * task into the wait for ever nirwana as well. - */ - tsk->flags |= PF_EXITPIDONE; + futex_exit_recursive(tsk); set_current_state(TASK_UNINTERRUPTIBLE); schedule(); } exit_signals(tsk); /* sets PF_EXITING */ - /* - * Ensure that all new tsk->pi_lock acquisitions must observe - * PF_EXITING. Serializes against futex.c:attach_to_pi_owner(). - */ - smp_mb(); - /* - * Ensure that we must observe the pi_state in exit_mm() -> - * mm_release() -> exit_pi_state_list(). - */ - raw_spin_lock_irq(&tsk->pi_lock); - raw_spin_unlock_irq(&tsk->pi_lock); if (unlikely(in_atomic())) { pr_info("note: %s[%d] exited with preempt_count %d\n", @@ -846,12 +826,6 @@ void __noreturn do_exit(long code) * Make sure we are holding no locks: */ debug_check_no_locks_held(); - /* - * We can do this unlocked here. The futex code uses this flag - * just to verify whether the pi state cleanup has been done - * or not. In the worst case it loops once more. - */ - tsk->flags |= PF_EXITPIDONE; if (tsk->io_context) exit_io_context(tsk); diff --git a/kernel/fork.c b/kernel/fork.c index 13b38794efb5..6cabc124378c 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1283,24 +1283,8 @@ static int wait_for_vfork_done(struct task_struct *child, * restoring the old one. . . * Eric Biederman 10 January 1998 */ -void mm_release(struct task_struct *tsk, struct mm_struct *mm) +static void mm_release(struct task_struct *tsk, struct mm_struct *mm) { - /* Get rid of any futexes when releasing the mm */ -#ifdef CONFIG_FUTEX - if (unlikely(tsk->robust_list)) { - exit_robust_list(tsk); - tsk->robust_list = NULL; - } -#ifdef CONFIG_COMPAT - if (unlikely(tsk->compat_robust_list)) { - compat_exit_robust_list(tsk); - tsk->compat_robust_list = NULL; - } -#endif - if (unlikely(!list_empty(&tsk->pi_state_list))) - exit_pi_state_list(tsk); -#endif - uprobe_free_utask(tsk); /* Get rid of any cached register state */ @@ -1333,6 +1317,18 @@ void mm_release(struct task_struct *tsk, struct mm_struct *mm) complete_vfork_done(tsk); } +void exit_mm_release(struct task_struct *tsk, struct mm_struct *mm) +{ + futex_exit_release(tsk); + mm_release(tsk, mm); +} + +void exec_mm_release(struct task_struct *tsk, struct mm_struct *mm) +{ + futex_exec_release(tsk); + mm_release(tsk, mm); +} + /** * dup_mm() - duplicates an existing mm structure * @tsk: the task_struct with which the new mm will be associated. @@ -2062,14 +2058,8 @@ static __latent_entropy struct task_struct *copy_process( #ifdef CONFIG_BLOCK p->plug = NULL; #endif -#ifdef CONFIG_FUTEX - p->robust_list = NULL; -#ifdef CONFIG_COMPAT - p->compat_robust_list = NULL; -#endif - INIT_LIST_HEAD(&p->pi_state_list); - p->pi_state_cache = NULL; -#endif + futex_init_task(p); + /* * sigaltstack should be cleared when sharing the same VM */ diff --git a/kernel/futex.c b/kernel/futex.c index bd18f60e4c6c..afbf928d6a6b 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -325,6 +325,12 @@ static inline bool should_fail_futex(bool fshared) } #endif /* CONFIG_FAIL_FUTEX */ +#ifdef CONFIG_COMPAT +static void compat_exit_robust_list(struct task_struct *curr); +#else +static inline void compat_exit_robust_list(struct task_struct *curr) { } +#endif + static inline void futex_get_mm(union futex_key *key) { mmgrab(key->private.mm); @@ -890,7 +896,7 @@ static void put_pi_state(struct futex_pi_state *pi_state) * Kernel cleans up PI-state, but userspace is likely hosed. * (Robust-futex cleanup is separate and might save the day for userspace.) */ -void exit_pi_state_list(struct task_struct *curr) +static void exit_pi_state_list(struct task_struct *curr) { struct list_head *next, *head = &curr->pi_state_list; struct futex_pi_state *pi_state; @@ -960,7 +966,8 @@ void exit_pi_state_list(struct task_struct *curr) } raw_spin_unlock_irq(&curr->pi_lock); } - +#else +static inline void exit_pi_state_list(struct task_struct *curr) { } #endif /* @@ -1169,16 +1176,47 @@ out_error: return ret; } +/** + * wait_for_owner_exiting - Block until the owner has exited + * @exiting: Pointer to the exiting task + * + * Caller must hold a refcount on @exiting. + */ +static void wait_for_owner_exiting(int ret, struct task_struct *exiting) +{ + if (ret != -EBUSY) { + WARN_ON_ONCE(exiting); + return; + } + + if (WARN_ON_ONCE(ret == -EBUSY && !exiting)) + return; + + mutex_lock(&exiting->futex_exit_mutex); + /* + * No point in doing state checking here. If the waiter got here + * while the task was in exec()->exec_futex_release() then it can + * have any FUTEX_STATE_* value when the waiter has acquired the + * mutex. OK, if running, EXITING or DEAD if it reached exit() + * already. Highly unlikely and not a problem. Just one more round + * through the futex maze. + */ + mutex_unlock(&exiting->futex_exit_mutex); + + put_task_struct(exiting); +} + static int handle_exit_race(u32 __user *uaddr, u32 uval, struct task_struct *tsk) { u32 uval2; /* - * If PF_EXITPIDONE is not yet set, then try again. + * If the futex exit state is not yet FUTEX_STATE_DEAD, tell the + * caller that the alleged owner is busy. */ - if (tsk && !(tsk->flags & PF_EXITPIDONE)) - return -EAGAIN; + if (tsk && tsk->futex_state != FUTEX_STATE_DEAD) + return -EBUSY; /* * Reread the user space value to handle the following situation: @@ -1196,8 +1234,9 @@ static int handle_exit_race(u32 __user *uaddr, u32 uval, * *uaddr = 0xC0000000; tsk = get_task(PID); * } if (!tsk->flags & PF_EXITING) { * ... attach(); - * tsk->flags |= PF_EXITPIDONE; } else { - * if (!(tsk->flags & PF_EXITPIDONE)) + * tsk->futex_state = } else { + * FUTEX_STATE_DEAD; if (tsk->futex_state != + * FUTEX_STATE_DEAD) * return -EAGAIN; * return -ESRCH; <--- FAIL * } @@ -1228,7 +1267,8 @@ static int handle_exit_race(u32 __user *uaddr, u32 uval, * it after doing proper sanity checks. */ static int attach_to_pi_owner(u32 __user *uaddr, u32 uval, union futex_key *key, - struct futex_pi_state **ps) + struct futex_pi_state **ps, + struct task_struct **exiting) { pid_t pid = uval & FUTEX_TID_MASK; struct futex_pi_state *pi_state; @@ -1253,22 +1293,33 @@ static int attach_to_pi_owner(u32 __user *uaddr, u32 uval, union futex_key *key, } /* - * We need to look at the task state flags to figure out, - * whether the task is exiting. To protect against the do_exit - * change of the task flags, we do this protected by - * p->pi_lock: + * We need to look at the task state to figure out, whether the + * task is exiting. To protect against the change of the task state + * in futex_exit_release(), we do this protected by p->pi_lock: */ raw_spin_lock_irq(&p->pi_lock); - if (unlikely(p->flags & PF_EXITING)) { + if (unlikely(p->futex_state != FUTEX_STATE_OK)) { /* - * The task is on the way out. When PF_EXITPIDONE is - * set, we know that the task has finished the - * cleanup: + * The task is on the way out. When the futex state is + * FUTEX_STATE_DEAD, we know that the task has finished + * the cleanup: */ int ret = handle_exit_race(uaddr, uval, p); raw_spin_unlock_irq(&p->pi_lock); - put_task_struct(p); + /* + * If the owner task is between FUTEX_STATE_EXITING and + * FUTEX_STATE_DEAD then store the task pointer and keep + * the reference on the task struct. The calling code will + * drop all locks, wait for the task to reach + * FUTEX_STATE_DEAD and then drop the refcount. This is + * required to prevent a live lock when the current task + * preempted the exiting task between the two states. + */ + if (ret == -EBUSY) + *exiting = p; + else + put_task_struct(p); return ret; } @@ -1307,7 +1358,8 @@ static int attach_to_pi_owner(u32 __user *uaddr, u32 uval, union futex_key *key, static int lookup_pi_state(u32 __user *uaddr, u32 uval, struct futex_hash_bucket *hb, - union futex_key *key, struct futex_pi_state **ps) + union futex_key *key, struct futex_pi_state **ps, + struct task_struct **exiting) { struct futex_q *top_waiter = futex_top_waiter(hb, key); @@ -1322,7 +1374,7 @@ static int lookup_pi_state(u32 __user *uaddr, u32 uval, * We are the first waiter - try to look up the owner based on * @uval and attach to it. */ - return attach_to_pi_owner(uaddr, uval, key, ps); + return attach_to_pi_owner(uaddr, uval, key, ps, exiting); } static int lock_pi_update_atomic(u32 __user *uaddr, u32 uval, u32 newval) @@ -1350,6 +1402,8 @@ static int lock_pi_update_atomic(u32 __user *uaddr, u32 uval, u32 newval) * lookup * @task: the task to perform the atomic lock work for. This will * be "current" except in the case of requeue pi. + * @exiting: Pointer to store the task pointer of the owner task + * which is in the middle of exiting * @set_waiters: force setting the FUTEX_WAITERS bit (1) or not (0) * * Return: @@ -1358,11 +1412,17 @@ static int lock_pi_update_atomic(u32 __user *uaddr, u32 uval, u32 newval) * - <0 - error * * The hb->lock and futex_key refs shall be held by the caller. + * + * @exiting is only set when the return value is -EBUSY. If so, this holds + * a refcount on the exiting task on return and the caller needs to drop it + * after waiting for the exit to complete. */ static int futex_lock_pi_atomic(u32 __user *uaddr, struct futex_hash_bucket *hb, union futex_key *key, struct futex_pi_state **ps, - struct task_struct *task, int set_waiters) + struct task_struct *task, + struct task_struct **exiting, + int set_waiters) { u32 uval, newval, vpid = task_pid_vnr(task); struct futex_q *top_waiter; @@ -1432,7 +1492,7 @@ static int futex_lock_pi_atomic(u32 __user *uaddr, struct futex_hash_bucket *hb, * attach to the owner. If that fails, no harm done, we only * set the FUTEX_WAITERS bit in the user space variable. */ - return attach_to_pi_owner(uaddr, newval, key, ps); + return attach_to_pi_owner(uaddr, newval, key, ps, exiting); } /** @@ -1850,6 +1910,8 @@ void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key, * @key1: the from futex key * @key2: the to futex key * @ps: address to store the pi_state pointer + * @exiting: Pointer to store the task pointer of the owner task + * which is in the middle of exiting * @set_waiters: force setting the FUTEX_WAITERS bit (1) or not (0) * * Try and get the lock on behalf of the top waiter if we can do it atomically. @@ -1857,16 +1919,20 @@ void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key, * then direct futex_lock_pi_atomic() to force setting the FUTEX_WAITERS bit. * hb1 and hb2 must be held by the caller. * + * @exiting is only set when the return value is -EBUSY. If so, this holds + * a refcount on the exiting task on return and the caller needs to drop it + * after waiting for the exit to complete. + * * Return: * - 0 - failed to acquire the lock atomically; * - >0 - acquired the lock, return value is vpid of the top_waiter * - <0 - error */ -static int futex_proxy_trylock_atomic(u32 __user *pifutex, - struct futex_hash_bucket *hb1, - struct futex_hash_bucket *hb2, - union futex_key *key1, union futex_key *key2, - struct futex_pi_state **ps, int set_waiters) +static int +futex_proxy_trylock_atomic(u32 __user *pifutex, struct futex_hash_bucket *hb1, + struct futex_hash_bucket *hb2, union futex_key *key1, + union futex_key *key2, struct futex_pi_state **ps, + struct task_struct **exiting, int set_waiters) { struct futex_q *top_waiter = NULL; u32 curval; @@ -1903,7 +1969,7 @@ static int futex_proxy_trylock_atomic(u32 __user *pifutex, */ vpid = task_pid_vnr(top_waiter->task); ret = futex_lock_pi_atomic(pifutex, hb2, key2, ps, top_waiter->task, - set_waiters); + exiting, set_waiters); if (ret == 1) { requeue_pi_wake_futex(top_waiter, key2, hb2); return vpid; @@ -2032,6 +2098,8 @@ retry_private: } if (requeue_pi && (task_count - nr_wake < nr_requeue)) { + struct task_struct *exiting = NULL; + /* * Attempt to acquire uaddr2 and wake the top waiter. If we * intend to requeue waiters, force setting the FUTEX_WAITERS @@ -2039,7 +2107,8 @@ retry_private: * faults rather in the requeue loop below. */ ret = futex_proxy_trylock_atomic(uaddr2, hb1, hb2, &key1, - &key2, &pi_state, nr_requeue); + &key2, &pi_state, + &exiting, nr_requeue); /* * At this point the top_waiter has either taken uaddr2 or is @@ -2066,7 +2135,8 @@ retry_private: * If that call succeeds then we have pi_state and an * initial refcount on it. */ - ret = lookup_pi_state(uaddr2, ret, hb2, &key2, &pi_state); + ret = lookup_pi_state(uaddr2, ret, hb2, &key2, + &pi_state, &exiting); } switch (ret) { @@ -2084,17 +2154,24 @@ retry_private: if (!ret) goto retry; goto out; + case -EBUSY: case -EAGAIN: /* * Two reasons for this: - * - Owner is exiting and we just wait for the + * - EBUSY: Owner is exiting and we just wait for the * exit to complete. - * - The user space value changed. + * - EAGAIN: The user space value changed. */ double_unlock_hb(hb1, hb2); hb_waiters_dec(hb2); put_futex_key(&key2); put_futex_key(&key1); + /* + * Handle the case where the owner is in the middle of + * exiting. Wait for the exit to complete otherwise + * this task might loop forever, aka. live lock. + */ + wait_for_owner_exiting(ret, exiting); cond_resched(); goto retry; default: @@ -2801,6 +2878,7 @@ static int futex_lock_pi(u32 __user *uaddr, unsigned int flags, { struct hrtimer_sleeper timeout, *to; struct futex_pi_state *pi_state = NULL; + struct task_struct *exiting = NULL; struct rt_mutex_waiter rt_waiter; struct futex_hash_bucket *hb; struct futex_q q = futex_q_init; @@ -2822,7 +2900,8 @@ retry: retry_private: hb = queue_lock(&q); - ret = futex_lock_pi_atomic(uaddr, hb, &q.key, &q.pi_state, current, 0); + ret = futex_lock_pi_atomic(uaddr, hb, &q.key, &q.pi_state, current, + &exiting, 0); if (unlikely(ret)) { /* * Atomic work succeeded and we got the lock, @@ -2835,15 +2914,22 @@ retry_private: goto out_unlock_put_key; case -EFAULT: goto uaddr_faulted; + case -EBUSY: case -EAGAIN: /* * Two reasons for this: - * - Task is exiting and we just wait for the + * - EBUSY: Task is exiting and we just wait for the * exit to complete. - * - The user space value changed. + * - EAGAIN: The user space value changed. */ queue_unlock(hb); put_futex_key(&q.key); + /* + * Handle the case where the owner is in the middle of + * exiting. Wait for the exit to complete otherwise + * this task might loop forever, aka. live lock. + */ + wait_for_owner_exiting(ret, exiting); cond_resched(); goto retry; default: @@ -3452,11 +3538,16 @@ err_unlock: return ret; } +/* Constants for the pending_op argument of handle_futex_death */ +#define HANDLE_DEATH_PENDING true +#define HANDLE_DEATH_LIST false + /* * Process a futex-list entry, check whether it's owned by the * dying task, and do notification if so: */ -static int handle_futex_death(u32 __user *uaddr, struct task_struct *curr, int pi) +static int handle_futex_death(u32 __user *uaddr, struct task_struct *curr, + bool pi, bool pending_op) { u32 uval, uninitialized_var(nval), mval; int err; @@ -3469,6 +3560,42 @@ retry: if (get_user(uval, uaddr)) return -1; + /* + * Special case for regular (non PI) futexes. The unlock path in + * user space has two race scenarios: + * + * 1. The unlock path releases the user space futex value and + * before it can execute the futex() syscall to wake up + * waiters it is killed. + * + * 2. A woken up waiter is killed before it can acquire the + * futex in user space. + * + * In both cases the TID validation below prevents a wakeup of + * potential waiters which can cause these waiters to block + * forever. + * + * In both cases the following conditions are met: + * + * 1) task->robust_list->list_op_pending != NULL + * @pending_op == true + * 2) User space futex value == 0 + * 3) Regular futex: @pi == false + * + * If these conditions are met, it is safe to attempt waking up a + * potential waiter without touching the user space futex value and + * trying to set the OWNER_DIED bit. The user space futex value is + * uncontended and the rest of the user space mutex state is + * consistent, so a woken waiter will just take over the + * uncontended futex. Setting the OWNER_DIED bit would create + * inconsistent state and malfunction of the user space owner died + * handling. + */ + if (pending_op && !pi && !uval) { + futex_wake(uaddr, 1, 1, FUTEX_BITSET_MATCH_ANY); + return 0; + } + if ((uval & FUTEX_TID_MASK) != task_pid_vnr(curr)) return 0; @@ -3547,7 +3674,7 @@ static inline int fetch_robust_entry(struct robust_list __user **entry, * * We silently return on any sign of list-walking problem. */ -void exit_robust_list(struct task_struct *curr) +static void exit_robust_list(struct task_struct *curr) { struct robust_list_head __user *head = curr->robust_list; struct robust_list __user *entry, *next_entry, *pending; @@ -3588,10 +3715,11 @@ void exit_robust_list(struct task_struct *curr) * A pending lock might already be on the list, so * don't process it twice: */ - if (entry != pending) + if (entry != pending) { if (handle_futex_death((void __user *)entry + futex_offset, - curr, pi)) + curr, pi, HANDLE_DEATH_LIST)) return; + } if (rc) return; entry = next_entry; @@ -3605,9 +3733,118 @@ void exit_robust_list(struct task_struct *curr) cond_resched(); } - if (pending) + if (pending) { handle_futex_death((void __user *)pending + futex_offset, - curr, pip); + curr, pip, HANDLE_DEATH_PENDING); + } +} + +static void futex_cleanup(struct task_struct *tsk) +{ + if (unlikely(tsk->robust_list)) { + exit_robust_list(tsk); + tsk->robust_list = NULL; + } + +#ifdef CONFIG_COMPAT + if (unlikely(tsk->compat_robust_list)) { + compat_exit_robust_list(tsk); + tsk->compat_robust_list = NULL; + } +#endif + + if (unlikely(!list_empty(&tsk->pi_state_list))) + exit_pi_state_list(tsk); +} + +/** + * futex_exit_recursive - Set the tasks futex state to FUTEX_STATE_DEAD + * @tsk: task to set the state on + * + * Set the futex exit state of the task lockless. The futex waiter code + * observes that state when a task is exiting and loops until the task has + * actually finished the futex cleanup. The worst case for this is that the + * waiter runs through the wait loop until the state becomes visible. + * + * This is called from the recursive fault handling path in do_exit(). + * + * This is best effort. Either the futex exit code has run already or + * not. If the OWNER_DIED bit has been set on the futex then the waiter can + * take it over. If not, the problem is pushed back to user space. If the + * futex exit code did not run yet, then an already queued waiter might + * block forever, but there is nothing which can be done about that. + */ +void futex_exit_recursive(struct task_struct *tsk) +{ + /* If the state is FUTEX_STATE_EXITING then futex_exit_mutex is held */ + if (tsk->futex_state == FUTEX_STATE_EXITING) + mutex_unlock(&tsk->futex_exit_mutex); + tsk->futex_state = FUTEX_STATE_DEAD; +} + +static void futex_cleanup_begin(struct task_struct *tsk) +{ + /* + * Prevent various race issues against a concurrent incoming waiter + * including live locks by forcing the waiter to block on + * tsk->futex_exit_mutex when it observes FUTEX_STATE_EXITING in + * attach_to_pi_owner(). + */ + mutex_lock(&tsk->futex_exit_mutex); + + /* + * Switch the state to FUTEX_STATE_EXITING under tsk->pi_lock. + * + * This ensures that all subsequent checks of tsk->futex_state in + * attach_to_pi_owner() must observe FUTEX_STATE_EXITING with + * tsk->pi_lock held. + * + * It guarantees also that a pi_state which was queued right before + * the state change under tsk->pi_lock by a concurrent waiter must + * be observed in exit_pi_state_list(). + */ + raw_spin_lock_irq(&tsk->pi_lock); + tsk->futex_state = FUTEX_STATE_EXITING; + raw_spin_unlock_irq(&tsk->pi_lock); +} + +static void futex_cleanup_end(struct task_struct *tsk, int state) +{ + /* + * Lockless store. The only side effect is that an observer might + * take another loop until it becomes visible. + */ + tsk->futex_state = state; + /* + * Drop the exit protection. This unblocks waiters which observed + * FUTEX_STATE_EXITING to reevaluate the state. + */ + mutex_unlock(&tsk->futex_exit_mutex); +} + +void futex_exec_release(struct task_struct *tsk) +{ + /* + * The state handling is done for consistency, but in the case of + * exec() there is no way to prevent futher damage as the PID stays + * the same. But for the unlikely and arguably buggy case that a + * futex is held on exec(), this provides at least as much state + * consistency protection which is possible. + */ + futex_cleanup_begin(tsk); + futex_cleanup(tsk); + /* + * Reset the state to FUTEX_STATE_OK. The task is alive and about + * exec a new binary. + */ + futex_cleanup_end(tsk, FUTEX_STATE_OK); +} + +void futex_exit_release(struct task_struct *tsk) +{ + futex_cleanup_begin(tsk); + futex_cleanup(tsk); + futex_cleanup_end(tsk, FUTEX_STATE_DEAD); } long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout, @@ -3737,7 +3974,7 @@ static void __user *futex_uaddr(struct robust_list __user *entry, * * We silently return on any sign of list-walking problem. */ -void compat_exit_robust_list(struct task_struct *curr) +static void compat_exit_robust_list(struct task_struct *curr) { struct compat_robust_list_head __user *head = curr->compat_robust_list; struct robust_list __user *entry, *next_entry, *pending; @@ -3784,7 +4021,8 @@ void compat_exit_robust_list(struct task_struct *curr) if (entry != pending) { void __user *uaddr = futex_uaddr(entry, futex_offset); - if (handle_futex_death(uaddr, curr, pi)) + if (handle_futex_death(uaddr, curr, pi, + HANDLE_DEATH_LIST)) return; } if (rc) @@ -3803,7 +4041,7 @@ void compat_exit_robust_list(struct task_struct *curr) if (pending) { void __user *uaddr = futex_uaddr(pending, futex_offset); - handle_futex_death(uaddr, curr, pip); + handle_futex_death(uaddr, curr, pip, HANDLE_DEATH_PENDING); } } diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 78bd2e3722c7..d14f6684737d 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -3454,26 +3454,6 @@ static int nvhdmi_chmap_validate(struct hdac_chmap *chmap, return 0; } -/* map from pin NID to port; port is 0-based */ -/* for Nvidia: assume widget NID starting from 4, with step 1 (4, 5, 6, ...) */ -static int nvhdmi_pin2port(void *audio_ptr, int pin_nid) -{ - return pin_nid - 4; -} - -/* reverse-map from port to pin NID: see above */ -static int nvhdmi_port2pin(struct hda_codec *codec, int port) -{ - return port + 4; -} - -static const struct drm_audio_component_audio_ops nvhdmi_audio_ops = { - .pin2port = nvhdmi_pin2port, - .pin_eld_notify = generic_acomp_pin_eld_notify, - .master_bind = generic_acomp_master_bind, - .master_unbind = generic_acomp_master_unbind, -}; - static int patch_nvhdmi(struct hda_codec *codec) { struct hdmi_spec *spec; @@ -3492,8 +3472,6 @@ static int patch_nvhdmi(struct hda_codec *codec) codec->link_down_at_suspend = 1; - generic_acomp_init(codec, &nvhdmi_audio_ops, nvhdmi_port2pin); - return 0; } diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 45eee5cc312e..6cd4ff09c5ee 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -2930,6 +2930,9 @@ static int snd_usb_mixer_controls_badd(struct usb_mixer_interface *mixer, continue; iface = usb_ifnum_to_if(dev, intf); + if (!iface) + continue; + num = iface->num_altsetting; if (num < 2) diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c index 7d460b1f1735..94b903d95afa 100644 --- a/sound/usb/mixer_scarlett_gen2.c +++ b/sound/usb/mixer_scarlett_gen2.c @@ -261,34 +261,34 @@ static const struct scarlett2_device_info s6i6_gen2_info = { }, .ports = { - { + [SCARLETT2_PORT_TYPE_NONE] = { .id = 0x000, .num = { 1, 0, 8, 8, 8 }, .src_descr = "Off", .src_num_offset = 0, }, - { + [SCARLETT2_PORT_TYPE_ANALOGUE] = { .id = 0x080, .num = { 4, 4, 4, 4, 4 }, .src_descr = "Analogue %d", .src_num_offset = 1, .dst_descr = "Analogue Output %02d Playback" }, - { + [SCARLETT2_PORT_TYPE_SPDIF] = { .id = 0x180, .num = { 2, 2, 2, 2, 2 }, .src_descr = "S/PDIF %d", .src_num_offset = 1, .dst_descr = "S/PDIF Output %d Playback" }, - { + [SCARLETT2_PORT_TYPE_MIX] = { .id = 0x300, .num = { 10, 18, 18, 18, 18 }, .src_descr = "Mix %c", .src_num_offset = 65, .dst_descr = "Mixer Input %02d Capture" }, - { + [SCARLETT2_PORT_TYPE_PCM] = { .id = 0x600, .num = { 6, 6, 6, 6, 6 }, .src_descr = "PCM %d", @@ -317,44 +317,44 @@ static const struct scarlett2_device_info s18i8_gen2_info = { }, .ports = { - { + [SCARLETT2_PORT_TYPE_NONE] = { .id = 0x000, .num = { 1, 0, 8, 8, 4 }, .src_descr = "Off", .src_num_offset = 0, }, - { + [SCARLETT2_PORT_TYPE_ANALOGUE] = { .id = 0x080, .num = { 8, 6, 6, 6, 6 }, .src_descr = "Analogue %d", .src_num_offset = 1, .dst_descr = "Analogue Output %02d Playback" }, - { + [SCARLETT2_PORT_TYPE_SPDIF] = { + .id = 0x180, /* S/PDIF outputs aren't available at 192KHz * but are included in the USB mux I/O * assignment message anyway */ - .id = 0x180, .num = { 2, 2, 2, 2, 2 }, .src_descr = "S/PDIF %d", .src_num_offset = 1, .dst_descr = "S/PDIF Output %d Playback" }, - { + [SCARLETT2_PORT_TYPE_ADAT] = { .id = 0x200, .num = { 8, 0, 0, 0, 0 }, .src_descr = "ADAT %d", .src_num_offset = 1, }, - { + [SCARLETT2_PORT_TYPE_MIX] = { .id = 0x300, .num = { 10, 18, 18, 18, 18 }, .src_descr = "Mix %c", .src_num_offset = 65, .dst_descr = "Mixer Input %02d Capture" }, - { + [SCARLETT2_PORT_TYPE_PCM] = { .id = 0x600, .num = { 20, 18, 18, 14, 10 }, .src_descr = "PCM %d", @@ -387,20 +387,20 @@ static const struct scarlett2_device_info s18i20_gen2_info = { }, .ports = { - { + [SCARLETT2_PORT_TYPE_NONE] = { .id = 0x000, .num = { 1, 0, 8, 8, 6 }, .src_descr = "Off", .src_num_offset = 0, }, - { + [SCARLETT2_PORT_TYPE_ANALOGUE] = { .id = 0x080, .num = { 8, 10, 10, 10, 10 }, .src_descr = "Analogue %d", .src_num_offset = 1, .dst_descr = "Analogue Output %02d Playback" }, - { + [SCARLETT2_PORT_TYPE_SPDIF] = { /* S/PDIF outputs aren't available at 192KHz * but are included in the USB mux I/O * assignment message anyway @@ -411,21 +411,21 @@ static const struct scarlett2_device_info s18i20_gen2_info = { .src_num_offset = 1, .dst_descr = "S/PDIF Output %d Playback" }, - { + [SCARLETT2_PORT_TYPE_ADAT] = { .id = 0x200, .num = { 8, 8, 8, 4, 0 }, .src_descr = "ADAT %d", .src_num_offset = 1, .dst_descr = "ADAT Output %d Playback" }, - { + [SCARLETT2_PORT_TYPE_MIX] = { .id = 0x300, .num = { 10, 18, 18, 18, 18 }, .src_descr = "Mix %c", .src_num_offset = 65, .dst_descr = "Mixer Input %02d Capture" }, - { + [SCARLETT2_PORT_TYPE_PCM] = { .id = 0x600, .num = { 20, 18, 18, 14, 10 }, .src_descr = "PCM %d", diff --git a/tools/arch/x86/tools/gen-insn-attr-x86.awk b/tools/arch/x86/tools/gen-insn-attr-x86.awk index b02a36b2c14f..a42015b305f4 100644 --- a/tools/arch/x86/tools/gen-insn-attr-x86.awk +++ b/tools/arch/x86/tools/gen-insn-attr-x86.awk @@ -69,7 +69,7 @@ BEGIN { lprefix1_expr = "\\((66|!F3)\\)" lprefix2_expr = "\\(F3\\)" - lprefix3_expr = "\\((F2|!F3|66\\&F2)\\)" + lprefix3_expr = "\\((F2|!F3|66&F2)\\)" lprefix_expr = "\\((66|F2|F3)\\)" max_lprefix = 4 @@ -257,7 +257,7 @@ function convert_operands(count,opnd, i,j,imm,mod) return add_flags(imm, mod) } -/^[0-9a-f]+\:/ { +/^[0-9a-f]+:/ { if (NR == 1) next # get index diff --git a/tools/testing/selftests/x86/mov_ss_trap.c b/tools/testing/selftests/x86/mov_ss_trap.c index 3c3a022654f3..6da0ac3f0135 100644 --- a/tools/testing/selftests/x86/mov_ss_trap.c +++ b/tools/testing/selftests/x86/mov_ss_trap.c @@ -257,7 +257,8 @@ int main() err(1, "sigaltstack"); sethandler(SIGSEGV, handle_and_longjmp, SA_RESETHAND | SA_ONSTACK); nr = SYS_getpid; - asm volatile ("mov %[ss], %%ss; SYSENTER" : "+a" (nr) + /* Clear EBP first to make sure we segfault cleanly. */ + asm volatile ("xorl %%ebp, %%ebp; mov %[ss], %%ss; SYSENTER" : "+a" (nr) : [ss] "m" (ss) : "flags", "rcx" #ifdef __x86_64__ , "r11" diff --git a/tools/testing/selftests/x86/sigreturn.c b/tools/testing/selftests/x86/sigreturn.c index 3e49a7873f3e..57c4f67f16ef 100644 --- a/tools/testing/selftests/x86/sigreturn.c +++ b/tools/testing/selftests/x86/sigreturn.c @@ -451,6 +451,19 @@ static void sigusr1(int sig, siginfo_t *info, void *ctx_void) ctx->uc_mcontext.gregs[REG_SP] = (unsigned long)0x8badf00d5aadc0deULL; ctx->uc_mcontext.gregs[REG_CX] = 0; +#ifdef __i386__ + /* + * Make sure the kernel doesn't inadvertently use DS or ES-relative + * accesses in a region where user DS or ES is loaded. + * + * Skip this for 64-bit builds because long mode doesn't care about + * DS and ES and skipping it increases test coverage a little bit, + * since 64-bit kernels can still run the 32-bit build. + */ + ctx->uc_mcontext.gregs[REG_DS] = 0; + ctx->uc_mcontext.gregs[REG_ES] = 0; +#endif + memcpy(&requested_regs, &ctx->uc_mcontext.gregs, sizeof(gregset_t)); requested_regs[REG_CX] = *ssptr(ctx); /* The asm code does this. */ diff --git a/tools/usb/usbip/libsrc/usbip_host_common.c b/tools/usb/usbip/libsrc/usbip_host_common.c index 2813aa821c82..d1d8ba2a4a40 100644 --- a/tools/usb/usbip/libsrc/usbip_host_common.c +++ b/tools/usb/usbip/libsrc/usbip_host_common.c @@ -57,7 +57,7 @@ static int32_t read_attr_usbip_status(struct usbip_usb_device *udev) } value = atoi(status); - + close(fd); return value; }