diff --git a/Makefile b/Makefile index 1ec880bcdb2d6..70a11157b2404 100644 --- a/Makefile +++ b/Makefile @@ -1,6 +1,6 @@ VERSION = 4 PATCHLEVEL = 9 -SUBLEVEL = 296 +SUBLEVEL = 297 EXTRAVERSION = NAME = Roaring Lionus diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index 88bbe364b6ae0..ae1b31d02784c 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -20,6 +20,7 @@ #ifndef __ASM_SYSREG_H #define __ASM_SYSREG_H +#include #include #include @@ -88,25 +89,81 @@ /* Common SCTLR_ELx flags. */ #define SCTLR_ELx_EE (1 << 25) +#define SCTLR_ELx_WXN (1 << 19) #define SCTLR_ELx_I (1 << 12) #define SCTLR_ELx_SA (1 << 3) #define SCTLR_ELx_C (1 << 2) #define SCTLR_ELx_A (1 << 1) #define SCTLR_ELx_M 1 -#define SCTLR_EL2_RES1 ((1 << 4) | (1 << 5) | (1 << 11) | (1 << 16) | \ - (1 << 16) | (1 << 18) | (1 << 22) | (1 << 23) | \ - (1 << 28) | (1 << 29)) - #define SCTLR_ELx_FLAGS (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \ SCTLR_ELx_SA | SCTLR_ELx_I) +/* SCTLR_EL2 specific flags. */ +#define SCTLR_EL2_RES1 ((1 << 4) | (1 << 5) | (1 << 11) | (1 << 16) | \ + (1 << 18) | (1 << 22) | (1 << 23) | (1 << 28) | \ + (1 << 29)) +#define SCTLR_EL2_RES0 ((1 << 6) | (1 << 7) | (1 << 8) | (1 << 9) | \ + (1 << 10) | (1 << 13) | (1 << 14) | (1 << 15) | \ + (1 << 17) | (1 << 20) | (1 << 21) | (1 << 24) | \ + (1 << 26) | (1 << 27) | (1 << 30) | (1 << 31)) + +#ifdef CONFIG_CPU_BIG_ENDIAN +#define ENDIAN_SET_EL2 SCTLR_ELx_EE +#define ENDIAN_CLEAR_EL2 0 +#else +#define ENDIAN_SET_EL2 0 +#define ENDIAN_CLEAR_EL2 SCTLR_ELx_EE +#endif + +/* SCTLR_EL2 value used for the hyp-stub */ +#define SCTLR_EL2_SET (ENDIAN_SET_EL2 | SCTLR_EL2_RES1) +#define SCTLR_EL2_CLEAR (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \ + SCTLR_ELx_SA | SCTLR_ELx_I | SCTLR_ELx_WXN | \ + ENDIAN_CLEAR_EL2 | SCTLR_EL2_RES0) + +/* Check all the bits are accounted for */ +#define SCTLR_EL2_BUILD_BUG_ON_MISSING_BITS BUILD_BUG_ON((SCTLR_EL2_SET ^ SCTLR_EL2_CLEAR) != ~0) + + /* SCTLR_EL1 specific flags. */ #define SCTLR_EL1_UCI (1 << 26) +#define SCTLR_EL1_E0E (1 << 24) #define SCTLR_EL1_SPAN (1 << 23) +#define SCTLR_EL1_NTWE (1 << 18) +#define SCTLR_EL1_NTWI (1 << 16) #define SCTLR_EL1_UCT (1 << 15) +#define SCTLR_EL1_DZE (1 << 14) +#define SCTLR_EL1_UMA (1 << 9) #define SCTLR_EL1_SED (1 << 8) +#define SCTLR_EL1_ITD (1 << 7) #define SCTLR_EL1_CP15BEN (1 << 5) +#define SCTLR_EL1_SA0 (1 << 4) + +#define SCTLR_EL1_RES1 ((1 << 11) | (1 << 20) | (1 << 22) | (1 << 28) | \ + (1 << 29)) +#define SCTLR_EL1_RES0 ((1 << 6) | (1 << 10) | (1 << 13) | (1 << 17) | \ + (1 << 21) | (1 << 27) | (1 << 30) | (1 << 31)) + +#ifdef CONFIG_CPU_BIG_ENDIAN +#define ENDIAN_SET_EL1 (SCTLR_EL1_E0E | SCTLR_ELx_EE) +#define ENDIAN_CLEAR_EL1 0 +#else +#define ENDIAN_SET_EL1 0 +#define ENDIAN_CLEAR_EL1 (SCTLR_EL1_E0E | SCTLR_ELx_EE) +#endif + +#define SCTLR_EL1_SET (SCTLR_ELx_M | SCTLR_ELx_C | SCTLR_ELx_SA |\ + SCTLR_EL1_SA0 | SCTLR_EL1_SED | SCTLR_ELx_I |\ + SCTLR_EL1_DZE | SCTLR_EL1_UCT | SCTLR_EL1_NTWI |\ + SCTLR_EL1_NTWE | SCTLR_EL1_SPAN | ENDIAN_SET_EL1 |\ + SCTLR_EL1_UCI | SCTLR_EL1_RES1) +#define SCTLR_EL1_CLEAR (SCTLR_ELx_A | SCTLR_EL1_CP15BEN | SCTLR_EL1_ITD |\ + SCTLR_EL1_UMA | SCTLR_ELx_WXN | ENDIAN_CLEAR_EL1 |\ + SCTLR_EL1_RES0) + +/* Check all the bits are accounted for */ +#define SCTLR_EL1_BUILD_BUG_ON_MISSING_BITS BUILD_BUG_ON((SCTLR_EL1_SET ^ SCTLR_EL1_CLEAR) != ~0) /* id_aa64isar0 */ #define ID_AA64ISAR0_RDM_SHIFT 28 @@ -244,6 +301,7 @@ #else +#include #include asm( @@ -300,6 +358,9 @@ static inline void config_sctlr_el1(u32 clear, u32 set) { u32 val; + SCTLR_EL2_BUILD_BUG_ON_MISSING_BITS; + SCTLR_EL1_BUILD_BUG_ON_MISSING_BITS; + val = read_sysreg(sctlr_el1); val &= ~clear; val |= set; diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index 3875423836622..04f81675b6b3a 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -489,21 +489,16 @@ ENTRY(el2_setup) msr SPsel, #1 // We want to use SP_EL{1,2} mrs x0, CurrentEL cmp x0, #CurrentEL_EL2 - b.ne 1f - mrs x0, sctlr_el2 -CPU_BE( orr x0, x0, #(1 << 25) ) // Set the EE bit for EL2 -CPU_LE( bic x0, x0, #(1 << 25) ) // Clear the EE bit for EL2 - msr sctlr_el2, x0 - b 2f -1: mrs x0, sctlr_el1 -CPU_BE( orr x0, x0, #(3 << 24) ) // Set the EE and E0E bits for EL1 -CPU_LE( bic x0, x0, #(3 << 24) ) // Clear the EE and E0E bits for EL1 + b.eq 1f + mov_q x0, (SCTLR_EL1_RES1 | ENDIAN_SET_EL1) msr sctlr_el1, x0 mov w0, #BOOT_CPU_MODE_EL1 // This cpu booted in EL1 isb ret -2: +1: mov_q x0, (SCTLR_EL2_RES1 | ENDIAN_SET_EL2) + msr sctlr_el2, x0 + #ifdef CONFIG_ARM64_VHE /* * Check for VHE being present. For the rest of the EL2 setup, @@ -554,26 +549,6 @@ set_hcr: msr vpidr_el2, x0 msr vmpidr_el2, x1 - /* - * When VHE is not in use, early init of EL2 and EL1 needs to be - * done here. - * When VHE _is_ in use, EL1 will not be used in the host and - * requires no configuration, and all non-hyp-specific EL2 setup - * will be done via the _EL1 system register aliases in __cpu_setup. - */ - cbnz x2, 1f - - /* sctlr_el1 */ - mov x0, #0x0800 // Set/clear RES{1,0} bits -CPU_BE( movk x0, #0x33d0, lsl #16 ) // Set EE and E0E on BE systems -CPU_LE( movk x0, #0x30d0, lsl #16 ) // Clear EE and E0E on LE systems - msr sctlr_el1, x0 - - /* Coprocessor traps. */ - mov x0, #0x33ff - msr cptr_el2, x0 // Disable copro. traps to EL2 -1: - #ifdef CONFIG_COMPAT msr hstr_el2, xzr // Disable CP15 traps to EL2 #endif @@ -599,6 +574,20 @@ CPU_LE( movk x0, #0x30d0, lsl #16 ) // Clear EE and E0E on LE systems ret install_el2_stub: + /* + * When VHE is not in use, early init of EL2 and EL1 needs to be + * done here. + * When VHE _is_ in use, EL1 will not be used in the host and + * requires no configuration, and all non-hyp-specific EL2 setup + * will be done via the _EL1 system register aliases in __cpu_setup. + */ + mov_q x0, (SCTLR_EL1_RES1 | ENDIAN_SET_EL1) + msr sctlr_el1, x0 + + /* Coprocessor traps. */ + mov x0, #0x33ff + msr cptr_el2, x0 // Disable copro. traps to EL2 + /* Hypervisor stub */ adrp x0, __hyp_stub_vectors add x0, x0, #:lo12:__hyp_stub_vectors diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index 1b91b8c8999bc..266211a0ecd6d 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -413,11 +413,7 @@ ENTRY(__cpu_setup) /* * Prepare SCTLR */ - adr x5, crval - ldp w5, w6, [x5] - mrs x0, sctlr_el1 - bic x0, x0, x5 // clear bits - orr x0, x0, x6 // set bits + mov_q x0, SCTLR_EL1_SET /* * Set/prepare TCR and TTBR. We use 512GB (39-bit) address range for * both user and kernel. @@ -453,21 +449,3 @@ ENTRY(__cpu_setup) msr tcr_el1, x10 ret // return to head.S ENDPROC(__cpu_setup) - - /* - * We set the desired value explicitly, including those of the - * reserved bits. The values of bits EE & E0E were set early in - * el2_setup, which are left untouched below. - * - * n n T - * U E WT T UD US IHBS - * CE0 XWHW CZ ME TEEA S - * .... .IEE .... NEAI TE.I ..AD DEN0 ACAM - * 0011 0... 1101 ..0. ..0. 10.. .0.. .... < hardware reserved - * .... .1.. .... 01.1 11.1 ..01 0.01 1101 < software settings - */ - .type crval, #object -crval: - .word 0xfcffffff // clear - .word 0x34d5d91d // set - .popsection diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 30c09b9ddbf0d..2069080191eeb 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -2442,11 +2442,9 @@ static const struct qca_device_info qca_devices_table[] = { { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */ }; -static int btusb_qca_send_vendor_req(struct hci_dev *hdev, u8 request, +static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request, void *data, u16 size) { - struct btusb_data *btdata = hci_get_drvdata(hdev); - struct usb_device *udev = btdata->udev; int pipe, err; u8 *buf; @@ -2461,7 +2459,7 @@ static int btusb_qca_send_vendor_req(struct hci_dev *hdev, u8 request, err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, buf, size, USB_CTRL_SET_TIMEOUT); if (err < 0) { - BT_ERR("%s: Failed to access otp area (%d)", hdev->name, err); + dev_err(&udev->dev, "Failed to access otp area (%d)", err); goto done; } @@ -2617,20 +2615,38 @@ static int btusb_setup_qca_load_nvm(struct hci_dev *hdev, return err; } +/* identify the ROM version and check whether patches are needed */ +static bool btusb_qca_need_patch(struct usb_device *udev) +{ + struct qca_version ver; + + if (btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver, + sizeof(ver)) < 0) + return false; + /* only low ROM versions need patches */ + return !(le32_to_cpu(ver.rom_version) & ~0xffffU); +} + static int btusb_setup_qca(struct hci_dev *hdev) { + struct btusb_data *btdata = hci_get_drvdata(hdev); + struct usb_device *udev = btdata->udev; const struct qca_device_info *info = NULL; struct qca_version ver; u32 ver_rom; u8 status; int i, err; - err = btusb_qca_send_vendor_req(hdev, QCA_GET_TARGET_VERSION, &ver, + err = btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver, sizeof(ver)); if (err < 0) return err; ver_rom = le32_to_cpu(ver.rom_version); + /* Don't care about high ROM versions */ + if (ver_rom & ~0xffffU) + return 0; + for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) { if (ver_rom == qca_devices_table[i].rom_version) info = &qca_devices_table[i]; @@ -2641,7 +2657,7 @@ static int btusb_setup_qca(struct hci_dev *hdev) return -ENODEV; } - err = btusb_qca_send_vendor_req(hdev, QCA_CHECK_STATUS, &status, + err = btusb_qca_send_vendor_req(udev, QCA_CHECK_STATUS, &status, sizeof(status)); if (err < 0) return err; @@ -2787,7 +2803,8 @@ static int btusb_probe(struct usb_interface *intf, /* Old firmware would otherwise let ath3k driver load * patch and sysconfig files */ - if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001) + if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001 && + !btusb_qca_need_patch(udev)) return -ENODEV; } @@ -2937,6 +2954,7 @@ static int btusb_probe(struct usb_interface *intf, } if (id->driver_info & BTUSB_ATH3012) { + data->setup_on_usb = btusb_setup_qca; hdev->set_bdaddr = btusb_set_bdaddr_ath3012; set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); diff --git a/drivers/isdn/mISDN/core.c b/drivers/isdn/mISDN/core.c index faf505462a4f5..f5a06a6fb297f 100644 --- a/drivers/isdn/mISDN/core.c +++ b/drivers/isdn/mISDN/core.c @@ -390,7 +390,7 @@ mISDNInit(void) err = mISDN_inittimer(&debug); if (err) goto error2; - err = l1_init(&debug); + err = Isdnl1_Init(&debug); if (err) goto error3; err = Isdnl2_Init(&debug); @@ -404,7 +404,7 @@ mISDNInit(void) error5: Isdnl2_cleanup(); error4: - l1_cleanup(); + Isdnl1_cleanup(); error3: mISDN_timer_cleanup(); error2: @@ -417,7 +417,7 @@ static void mISDN_cleanup(void) { misdn_sock_cleanup(); Isdnl2_cleanup(); - l1_cleanup(); + Isdnl1_cleanup(); mISDN_timer_cleanup(); class_unregister(&mISDN_class); diff --git a/drivers/isdn/mISDN/core.h b/drivers/isdn/mISDN/core.h index 52695bb81ee7a..3c039b6ade2e1 100644 --- a/drivers/isdn/mISDN/core.h +++ b/drivers/isdn/mISDN/core.h @@ -69,8 +69,8 @@ struct Bprotocol *get_Bprotocol4id(u_int); extern int mISDN_inittimer(u_int *); extern void mISDN_timer_cleanup(void); -extern int l1_init(u_int *); -extern void l1_cleanup(void); +extern int Isdnl1_Init(u_int *); +extern void Isdnl1_cleanup(void); extern int Isdnl2_Init(u_int *); extern void Isdnl2_cleanup(void); diff --git a/drivers/isdn/mISDN/layer1.c b/drivers/isdn/mISDN/layer1.c index bebc57b72138e..94d7cc58da648 100644 --- a/drivers/isdn/mISDN/layer1.c +++ b/drivers/isdn/mISDN/layer1.c @@ -407,7 +407,7 @@ create_l1(struct dchannel *dch, dchannel_l1callback *dcb) { EXPORT_SYMBOL(create_l1); int -l1_init(u_int *deb) +Isdnl1_Init(u_int *deb) { debug = deb; l1fsm_s.state_count = L1S_STATE_COUNT; @@ -419,7 +419,7 @@ l1_init(u_int *deb) } void -l1_cleanup(void) +Isdnl1_cleanup(void) { mISDN_FsmFree(&l1fsm_s); } diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index e7585f6c4665b..104f8eb828a04 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -5429,6 +5429,27 @@ int i40e_open(struct net_device *netdev) return 0; } +/** + * i40e_netif_set_realnum_tx_rx_queues - Update number of tx/rx queues + * @vsi: vsi structure + * + * This updates netdev's number of tx/rx queues + * + * Returns status of setting tx/rx queues + **/ +static int i40e_netif_set_realnum_tx_rx_queues(struct i40e_vsi *vsi) +{ + int ret; + + ret = netif_set_real_num_rx_queues(vsi->netdev, + vsi->num_queue_pairs); + if (ret) + return ret; + + return netif_set_real_num_tx_queues(vsi->netdev, + vsi->num_queue_pairs); +} + /** * i40e_vsi_open - * @vsi: the VSI to open @@ -5463,13 +5484,7 @@ int i40e_vsi_open(struct i40e_vsi *vsi) goto err_setup_rx; /* Notify the stack of the actual queue counts. */ - err = netif_set_real_num_tx_queues(vsi->netdev, - vsi->num_queue_pairs); - if (err) - goto err_set_queues; - - err = netif_set_real_num_rx_queues(vsi->netdev, - vsi->num_queue_pairs); + err = i40e_netif_set_realnum_tx_rx_queues(vsi); if (err) goto err_set_queues; @@ -9908,6 +9923,9 @@ struct i40e_vsi *i40e_vsi_setup(struct i40e_pf *pf, u8 type, case I40E_VSI_VMDQ2: case I40E_VSI_FCOE: ret = i40e_config_netdev(vsi); + if (ret) + goto err_netdev; + ret = i40e_netif_set_realnum_tx_rx_queues(vsi); if (ret) goto err_netdev; ret = register_netdev(vsi->netdev); diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c index 0ee54fba0a237..92df7c2d5850e 100644 --- a/drivers/net/ieee802154/atusb.c +++ b/drivers/net/ieee802154/atusb.c @@ -79,7 +79,9 @@ static int atusb_control_msg(struct atusb *atusb, unsigned int pipe, ret = usb_control_msg(usb_dev, pipe, request, requesttype, value, index, data, size, timeout); - if (ret < 0) { + if (ret < size) { + ret = ret < 0 ? ret : -ENODATA; + atusb->err = ret; dev_err(&usb_dev->dev, "atusb_control_msg: req 0x%02x val 0x%x idx 0x%x, error %d\n", @@ -637,9 +639,9 @@ static int atusb_get_and_show_build(struct atusb *atusb) if (!build) return -ENOMEM; - ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0), - ATUSB_BUILD, ATUSB_REQ_FROM_DEV, 0, 0, - build, ATUSB_BUILD_SIZE, 1000); + /* We cannot call atusb_control_msg() here, since this request may read various length data */ + ret = usb_control_msg(atusb->usb_dev, usb_rcvctrlpipe(usb_dev, 0), ATUSB_BUILD, + ATUSB_REQ_FROM_DEV, 0, 0, build, ATUSB_BUILD_SIZE, 1000); if (ret >= 0) { build[ret] = 0; dev_info(&usb_dev->dev, "Firmware: build %s\n", build); diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c index dc5b8e69f8e86..9567bd00a8144 100644 --- a/drivers/net/usb/rndis_host.c +++ b/drivers/net/usb/rndis_host.c @@ -619,6 +619,11 @@ static const struct usb_device_id products [] = { USB_DEVICE_AND_INTERFACE_INFO(0x1630, 0x0042, USB_CLASS_COMM, 2 /* ACM */, 0x0ff), .driver_info = (unsigned long) &rndis_poll_status_info, +}, { + /* Hytera Communications DMR radios' "Radio to PC Network" */ + USB_VENDOR_AND_INTERFACE_INFO(0x238b, + USB_CLASS_COMM, 2 /* ACM */, 0x0ff), + .driver_info = (unsigned long)&rndis_info, }, { /* RNDIS is MSFT's un-official variant of CDC ACM */ USB_INTERFACE_INFO(USB_CLASS_COMM, 2 /* ACM */, 0x0ff), diff --git a/drivers/power/reset/ltc2952-poweroff.c b/drivers/power/reset/ltc2952-poweroff.c index 15fed9d8f871a..ec54cff108b3c 100644 --- a/drivers/power/reset/ltc2952-poweroff.c +++ b/drivers/power/reset/ltc2952-poweroff.c @@ -169,8 +169,8 @@ static void ltc2952_poweroff_kill(void) static void ltc2952_poweroff_default(struct ltc2952_poweroff *data) { - data->wde_interval = ktime_set(0, 300L*1E6L); - data->trigger_delay = ktime_set(2, 500L*1E6L); + data->wde_interval = ktime_set(0, 300L * NSEC_PER_MSEC); + data->trigger_delay = ktime_set(2, 500L * NSEC_PER_MSEC); hrtimer_init(&data->timer_trigger, CLOCK_MONOTONIC, HRTIMER_MODE_REL); data->timer_trigger.function = ltc2952_poweroff_timer_trigger; diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 30e954bb6c81e..8d1a05d5eb4dd 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -2991,6 +2991,8 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) { struct iscsi_conn *conn = cls_conn->dd_data; struct iscsi_session *session = conn->session; + char *tmp_persistent_address = conn->persistent_address; + char *tmp_local_ipaddr = conn->local_ipaddr; del_timer_sync(&conn->transport_timer); @@ -3012,8 +3014,6 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) spin_lock_bh(&session->frwd_lock); free_pages((unsigned long) conn->data, get_order(ISCSI_DEF_MAX_RECV_SEG_LEN)); - kfree(conn->persistent_address); - kfree(conn->local_ipaddr); /* regular RX path uses back_lock */ spin_lock_bh(&session->back_lock); kfifo_in(&session->cmdpool.queue, (void*)&conn->login_task, @@ -3025,6 +3025,8 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) mutex_unlock(&session->eh_mutex); iscsi_destroy_conn(cls_conn); + kfree(tmp_persistent_address); + kfree(tmp_local_ipaddr); } EXPORT_SYMBOL_GPL(iscsi_conn_teardown); diff --git a/drivers/virtio/virtio_pci_common.c b/drivers/virtio/virtio_pci_common.c index d9a9058279671..37e3ba5dadf60 100644 --- a/drivers/virtio/virtio_pci_common.c +++ b/drivers/virtio/virtio_pci_common.c @@ -547,6 +547,13 @@ static void virtio_pci_remove(struct pci_dev *pci_dev) struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev); struct device *dev = get_device(&vp_dev->vdev.dev); + /* + * Device is marked broken on surprise removal so that virtio upper + * layers can abort any ongoing operation. + */ + if (!pci_device_is_present(pci_dev)) + virtio_break_device(&vp_dev->vdev); + unregister_virtio_device(&vp_dev->vdev); if (vp_dev->ioaddr) diff --git a/fs/xfs/xfs_ioctl.c b/fs/xfs/xfs_ioctl.c index 6c95812120ebd..5e28a5225e3fb 100644 --- a/fs/xfs/xfs_ioctl.c +++ b/fs/xfs/xfs_ioctl.c @@ -712,7 +712,8 @@ xfs_ioc_space( flags |= XFS_PREALLOC_CLEAR; if (bf->l_start > XFS_ISIZE(ip)) { error = xfs_alloc_file_space(ip, XFS_ISIZE(ip), - bf->l_start - XFS_ISIZE(ip), 0); + bf->l_start - XFS_ISIZE(ip), + XFS_BMAPI_PREALLOC); if (error) goto out_unlock; } diff --git a/include/linux/bug.h b/include/linux/bug.h index 0faae96302bda..eafb6213e582a 100644 --- a/include/linux/bug.h +++ b/include/linux/bug.h @@ -3,6 +3,7 @@ #include #include +#include enum bug_trap_type { BUG_TRAP_TYPE_NONE = 0, @@ -13,80 +14,9 @@ enum bug_trap_type { struct pt_regs; #ifdef __CHECKER__ -#define __BUILD_BUG_ON_NOT_POWER_OF_2(n) (0) -#define BUILD_BUG_ON_NOT_POWER_OF_2(n) (0) -#define BUILD_BUG_ON_ZERO(e) (0) -#define BUILD_BUG_ON_NULL(e) ((void*)0) -#define BUILD_BUG_ON_INVALID(e) (0) -#define BUILD_BUG_ON_MSG(cond, msg) (0) -#define BUILD_BUG_ON(condition) (0) -#define BUILD_BUG() (0) #define MAYBE_BUILD_BUG_ON(cond) (0) #else /* __CHECKER__ */ -/* Force a compilation error if a constant expression is not a power of 2 */ -#define __BUILD_BUG_ON_NOT_POWER_OF_2(n) \ - BUILD_BUG_ON(((n) & ((n) - 1)) != 0) -#define BUILD_BUG_ON_NOT_POWER_OF_2(n) \ - BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0)) - -/* Force a compilation error if condition is true, but also produce a - result (of value 0 and type size_t), so the expression can be used - e.g. in a structure initializer (or where-ever else comma expressions - aren't permitted). */ -#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); })) -#define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:-!!(e); })) - -/* - * BUILD_BUG_ON_INVALID() permits the compiler to check the validity of the - * expression but avoids the generation of any code, even if that expression - * has side-effects. - */ -#define BUILD_BUG_ON_INVALID(e) ((void)(sizeof((__force long)(e)))) - -/** - * BUILD_BUG_ON_MSG - break compile if a condition is true & emit supplied - * error message. - * @condition: the condition which the compiler should know is false. - * - * See BUILD_BUG_ON for description. - */ -#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg) - -/** - * BUILD_BUG_ON - break compile if a condition is true. - * @condition: the condition which the compiler should know is false. - * - * If you have some code which relies on certain constants being equal, or - * some other compile-time-evaluated condition, you should use BUILD_BUG_ON to - * detect if someone changes it. - * - * The implementation uses gcc's reluctance to create a negative array, but gcc - * (as of 4.4) only emits that error for obvious cases (e.g. not arguments to - * inline functions). Luckily, in 4.3 they added the "error" function - * attribute just for this type of case. Thus, we use a negative sized array - * (should always create an error on gcc versions older than 4.4) and then call - * an undefined function with the error attribute (should always create an - * error on gcc 4.3 and later). If for some reason, neither creates a - * compile-time error, we'll still have a link-time error, which is harder to - * track down. - */ -#ifndef __OPTIMIZE__ -#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) -#else -#define BUILD_BUG_ON(condition) \ - BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition) -#endif - -/** - * BUILD_BUG - break compile if used. - * - * If you have some code that you expect the compiler to eliminate at - * build time, you should use BUILD_BUG to detect if it is - * unexpectedly used. - */ -#define BUILD_BUG() BUILD_BUG_ON_MSG(1, "BUILD_BUG failed") - #define MAYBE_BUILD_BUG_ON(cond) \ do { \ if (__builtin_constant_p((cond))) \ diff --git a/include/linux/build_bug.h b/include/linux/build_bug.h new file mode 100644 index 0000000000000..b7d22d60008a9 --- /dev/null +++ b/include/linux/build_bug.h @@ -0,0 +1,84 @@ +#ifndef _LINUX_BUILD_BUG_H +#define _LINUX_BUILD_BUG_H + +#include + +#ifdef __CHECKER__ +#define __BUILD_BUG_ON_NOT_POWER_OF_2(n) (0) +#define BUILD_BUG_ON_NOT_POWER_OF_2(n) (0) +#define BUILD_BUG_ON_ZERO(e) (0) +#define BUILD_BUG_ON_NULL(e) ((void *)0) +#define BUILD_BUG_ON_INVALID(e) (0) +#define BUILD_BUG_ON_MSG(cond, msg) (0) +#define BUILD_BUG_ON(condition) (0) +#define BUILD_BUG() (0) +#else /* __CHECKER__ */ + +/* Force a compilation error if a constant expression is not a power of 2 */ +#define __BUILD_BUG_ON_NOT_POWER_OF_2(n) \ + BUILD_BUG_ON(((n) & ((n) - 1)) != 0) +#define BUILD_BUG_ON_NOT_POWER_OF_2(n) \ + BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0)) + +/* + * Force a compilation error if condition is true, but also produce a + * result (of value 0 and type size_t), so the expression can be used + * e.g. in a structure initializer (or where-ever else comma expressions + * aren't permitted). + */ +#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:(-!!(e)); })) +#define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:(-!!(e)); })) + +/* + * BUILD_BUG_ON_INVALID() permits the compiler to check the validity of the + * expression but avoids the generation of any code, even if that expression + * has side-effects. + */ +#define BUILD_BUG_ON_INVALID(e) ((void)(sizeof((__force long)(e)))) + +/** + * BUILD_BUG_ON_MSG - break compile if a condition is true & emit supplied + * error message. + * @condition: the condition which the compiler should know is false. + * + * See BUILD_BUG_ON for description. + */ +#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg) + +/** + * BUILD_BUG_ON - break compile if a condition is true. + * @condition: the condition which the compiler should know is false. + * + * If you have some code which relies on certain constants being equal, or + * some other compile-time-evaluated condition, you should use BUILD_BUG_ON to + * detect if someone changes it. + * + * The implementation uses gcc's reluctance to create a negative array, but gcc + * (as of 4.4) only emits that error for obvious cases (e.g. not arguments to + * inline functions). Luckily, in 4.3 they added the "error" function + * attribute just for this type of case. Thus, we use a negative sized array + * (should always create an error on gcc versions older than 4.4) and then call + * an undefined function with the error attribute (should always create an + * error on gcc 4.3 and later). If for some reason, neither creates a + * compile-time error, we'll still have a link-time error, which is harder to + * track down. + */ +#ifndef __OPTIMIZE__ +#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) +#else +#define BUILD_BUG_ON(condition) \ + BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition) +#endif + +/** + * BUILD_BUG - break compile if used. + * + * If you have some code that you expect the compiler to eliminate at + * build time, you should use BUILD_BUG to detect if it is + * unexpectedly used. + */ +#define BUILD_BUG() BUILD_BUG_ON_MSG(1, "BUILD_BUG failed") + +#endif /* __CHECKER__ */ + +#endif /* _LINUX_BUILD_BUG_H */ diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index e8bd8de856de9..01c646a1d9e76 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2354,7 +2354,7 @@ struct trace_buffer_struct { char buffer[4][TRACE_BUF_SIZE]; }; -static struct trace_buffer_struct *trace_percpu_buffer; +static struct trace_buffer_struct __percpu *trace_percpu_buffer; /* * Thise allows for lockless recording. If we're nested too deeply, then @@ -2364,7 +2364,7 @@ static char *get_trace_buf(void) { struct trace_buffer_struct *buffer = this_cpu_ptr(trace_percpu_buffer); - if (!buffer || buffer->nesting >= 4) + if (!trace_percpu_buffer || buffer->nesting >= 4) return NULL; buffer->nesting++; @@ -2383,7 +2383,7 @@ static void put_trace_buf(void) static int alloc_percpu_trace_buffer(void) { - struct trace_buffer_struct *buffers; + struct trace_buffer_struct __percpu *buffers; buffers = alloc_percpu(struct trace_buffer_struct); if (WARN(!buffers, "Could not allocate percpu trace_printk buffer")) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 860ab2e6544cc..8770966a564b5 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -2435,7 +2435,7 @@ int udp4_seq_show(struct seq_file *seq, void *v) { seq_setwidth(seq, 127); if (v == SEQ_START_TOKEN) - seq_puts(seq, " sl local_address rem_address st tx_queue " + seq_puts(seq, " sl local_address rem_address st tx_queue " "rx_queue tr tm->when retrnsmt uid timeout " "inode ref pointer drops"); else { diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c index f58d69216b616..ce5b55491942d 100644 --- a/net/ipv6/ip6_vti.c +++ b/net/ipv6/ip6_vti.c @@ -773,6 +773,8 @@ vti6_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) struct net *net = dev_net(dev); struct vti6_net *ip6n = net_generic(net, vti6_net_id); + memset(&p1, 0, sizeof(p1)); + switch (cmd) { case SIOCGETTUNNEL: if (dev == ip6n->fb_tnl_dev) { diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 3217c98f2b5a2..56c58ff8ef748 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -4450,7 +4450,7 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, if (new_sta) { u32 rates = 0, basic_rates = 0; - bool have_higher_than_11mbit; + bool have_higher_than_11mbit = false; int min_rate = INT_MAX, min_rate_index = -1; struct ieee80211_chanctx_conf *chanctx_conf; const struct cfg80211_bss_ies *ies; diff --git a/net/phonet/pep.c b/net/phonet/pep.c index 1e7945df39928..a734d47c5eb19 100644 --- a/net/phonet/pep.c +++ b/net/phonet/pep.c @@ -878,6 +878,7 @@ static struct sock *pep_sock_accept(struct sock *sk, int flags, int *errp) err = pep_accept_conn(newsk, skb); if (err) { + __sock_put(sk); sock_put(newsk); newsk = NULL; goto drop; diff --git a/net/sched/sch_qfq.c b/net/sched/sch_qfq.c index ca0516e6f7435..fd48a1e327d6a 100644 --- a/net/sched/sch_qfq.c +++ b/net/sched/sch_qfq.c @@ -1439,10 +1439,8 @@ static int qfq_init_qdisc(struct Qdisc *sch, struct nlattr *opt) if (err < 0) return err; - if (qdisc_dev(sch)->tx_queue_len + 1 > QFQ_MAX_AGG_CLASSES) - max_classes = QFQ_MAX_AGG_CLASSES; - else - max_classes = qdisc_dev(sch)->tx_queue_len + 1; + max_classes = min_t(u64, (u64)qdisc_dev(sch)->tx_queue_len + 1, + QFQ_MAX_AGG_CLASSES); /* max_cl_shift = floor(log_2(max_classes)) */ max_cl_shift = __fls(max_classes); q->max_agg_classes = 1<