Linux version 2.6.14-sh (root@vapier) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #2 Fri Nov 18 13:15:44 EST 2005 I-O DATA DEVICE, INC. "LANDISK Series" support. On node 0 totalpages: 16384 DMA zone: 16384 pages, LIFO batch:7 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 Built 1 zonelists Kernel command line: ro mem=64M root=/dev/hda1 console=ttySC1,9600 Setting GDB trap vector to 0x80000100 PID hash table entries: 512 (order: 9, 8192 bytes) Interval = 83333 Using tmu for system timer Console: colour dummy device 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 62080k/65536k available (2246k kernel code, 3444k reserved, 371k data, 76k init) PVR=04050005 CVR=20480000 PRR=00000113 I-cache : n_ways=2 n_sets=256 way_incr=8192 I-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2 D-cache : n_ways=2 n_sets=512 way_incr=16384 D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4 Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200) Mount-cache hash table entries: 512 CPU: SH7751R NET: Registered protocol family 16 usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using configuration type 1 SH7751R PCI: Finished initialization of the PCI controller DMA: Registering DMA API. DMA: Registering sh_dmac handler (4 channels). SH Virtual Bus initialized Allocate Area5/6 success. LANDISK and USL-5P Button, LED and GIO driver initialized Installing knfsd (copyright (C) 1996 okir@monad.swb.de). RICHO RS5C313 Real Time Clock Driver v1.12 SuperH SCI(F) driver initialized ttySC0 at MMIO 0xffe00000 (irq = 25) is a sci ttySC1 at MMIO 0xffe80000 (irq = 43) is a scif mice: PS/2 mouse device common for all mice io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) eth0: RTL-8139C+ at 0xfd000000, 00:a0:b0:70:c2:69, IRQ 5 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AEC6880R: IDE controller at PCI slot 0000:00:01.0 AEC6880R: chipset revision 7 AEC6880R: ROM enabled at 0x01010000 AEC6880R: 100% native mode on irq 6 ide0: BM-DMA at 0x4120-0x4127, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x4128-0x412f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: WDC WD800BB-00BSA0, ATA DISK drive ide0 at 0x4100-0x4107,0x410a on irq 6 Probing IDE interface ide1... ide: SuperH generic IDE interface ide-sh: Attempting to register ide2 when only 1 interfaces are available. Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... hda: max request size: 128KiB hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes not supported hda: hda1 hda2 hda3 usbmon: debugfs is not available ehci_hcd 0000:00:02.2: EHCI Host Controller ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.2: irq 5, io mem 0xfd003000 ehci_hcd 0000:00:02.2: park 0 ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 7, io mem 0xfd001000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ohci_hcd 0000:00:02.1: OHCI Host Controller ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.1: irq 8, io mem 0xfd002000 usb 1-1: new high speed USB device using ehci_hcd and address 2 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected sisusb: USB2VGA dongle found at address 2 sisusbvga[133]: Allocated 8 output buffers sisusbvga[133]: 8MB 1 ch/1 r SDR SDRAM, bus width 32 usbcore: registered new driver sisusb sisusb: Driver version 0.0.8 sisusb: Copyright (C) 2005 Thomas Winischhofer NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 76k freed Adding 125488k swap on /dev/hda2. Priority:-1 extents:1 across:125488k EXT3 FS on hda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: link up, 100Mbps, full-duplex, lpa 0x45E1