[    0.000000] Linux version 2.6.28-ER1-efikamx (root@efikamx) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #4 PREEMPT Sat Nov 28 16:47:52 CST 2009
[    0.000000] CPU: ARMv7 Processor [412fc081] revision 1 (ARMv7), cr=10c5387f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: Genesi Efika MX
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c03e5aa4, node_mem_map c040a000
[    0.000000]   DMA zone: 128 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 16256 pages, LIFO batch:3
[    0.000000]   Normal zone: 896 pages used for memmap
[    0.000000]   Normal zone: 113792 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: noinitrd console=ttymxc0,115200 console=tty1 root=/dev/sda2 rw hdmi
[    0.000000] MXC IRQ initialized
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[42949372.960000] Console: colour dummy device 80x30
[42949372.960000] console [tty1] enabled
[42949372.960000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[42949372.960000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[42949372.990000] Memory: 512MB = 512MB total
[42949372.990000] Memory: 515468KB available (3680K code, 293K data, 108K init)
[42949372.990000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[42949372.990000] Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696)
[42949373.220000] Mount-cache hash table entries: 512
[42949373.220000] CPU: Testing write buffer coherency: ok
[42949373.220000] net_namespace: 288 bytes
[42949373.220000] regulator: core version 0.5
[42949373.220000] NET: Registered protocol family 16
[42949373.220000] /proc/ioctl created
[42949373.220000] CPU is i.MX51 Revision 2.5
[42949373.220000] MXC GPIO hardware
[42949373.260000] GPIO-6 autorequested
[42949373.260000] GPIO-0 autorequested
[42949373.260000] GPIO-8 autorequested
[42949373.260000] GPIO-1 autorequested
[42949373.260000] GPIO-7 autorequested
[42949373.320000] GPIO-68 autorequested
[42949373.700000] IRAM READY
[42949373.700000] uio_pdrv_genirq.0: failed to claim resource 2
[42949373.700000] GPIO-70 autorequested
[42949373.700000] orig: parent=pll3 clk=216000000 this=ipu_di0_clk di_clk=27000000
[42949373.700000] adjust: parent=pll3 clk=260000000 ret=0 this=ipu_di0_clk di_clk=65000000 ret=0
[42949373.700000] Using SDMA I.API
[42949373.700000] MXC DMA API initialized
[42949373.710000] SCSI subsystem initialized
[42949373.710000] libata version 3.00 loaded.
[42949373.710000] CSPI: mxc_spi-0 probed
[42949373.710000] usbcore: registered new interface driver usbfs
[42949373.710000] usbcore: registered new interface driver hub
[42949373.710000] usbcore: registered new device driver usb
[42949373.710000] MXC I2C driver
[42949373.710000] MXC I2C driver
[42949373.710000] MXC HS I2C driver
[42949373.780000] cfg80211: Using static regulatory domain info
[42949373.780000] cfg80211: Regulatory domain: US
[42949373.780000]    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[42949373.780000]    (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[42949373.780000]    (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[42949373.780000]    (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[42949373.780000]    (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[42949373.780000]    (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[42949373.780000]    (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[42949373.780000] cfg80211: Calling CRDA for country: US
[42949373.780000] mc13892 Rev 0.0 FinVer 0 detected
[42949373.780000] Initializing regulators for Efika MX
[42949373.780000] regulator: SW1: 600 <--> 1375 mV 
[42949373.780000] regulator: SW2: 900 <--> 1850 mV 
[42949373.780000] regulator: SW3: 1100 <--> 1850 mV 
[42949373.780000] regulator: SW4: 1100 <--> 1850 mV 
[42949373.780000] regulator: SWBST: 0 mV 
[42949373.780000] regulator: VIOHI: 0 mV 
[42949373.780000] regulator: VPLL: 1050 <--> 1800 mV 
[42949373.780000] regulator: VDIG: 1050 <--> 1800 mV 
[42949373.780000] regulator: VSD: 1800 <--> 3150 mV 
[42949373.780000] regulator: VUSB2: 2400 <--> 2775 mV 
[42949373.780000] regulator: VVIDEO: 2775 mV 
[42949373.780000] regulator: VAUDIO: 2300 <--> 3000 mV 
[42949373.780000] regulator: VCAM: 2500 <--> 3000 mV fast normal 
[42949373.780000] regulator: VGEN1: 1200 <--> 3150 mV 
[42949373.780000] regulator: VGEN2: 1200 <--> 3150 mV 
[42949373.780000] regulator: VGEN3: 1800 <--> 2900 mV 
[42949373.780000] regulator: VUSB: 0 mV 
[42949373.780000] regulator: GPO1: 0 mV 
[42949373.780000] regulator: GPO2: 0 mV 
[42949373.790000] regulator: GPO3: 0 mV 
[42949373.790000] regulator: GPO4: 0 mV 
[42949373.790000] Device spi1.0 probed
[42949373.790000] NET: Registered protocol family 2
[42949373.800000] Switched to high resolution mode on CPU 0
[42949373.870000] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[42949373.870000] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[42949373.870000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[42949373.870000] TCP: Hash tables configured (established 65536 bind 65536)
[42949373.870000] TCP reno registered
[42949373.900000] NET: Registered protocol family 1
[42949373.900000] LPMode driver module loaded
[42949373.900000] Static Power Management for Freescale i.MX51
[42949373.900000] PM driver module loaded
[42949373.900000] Bus freq driver module loaded
[42949373.900000] usb: Host 1 host (isp1504) registered
[42949373.900000] usb: DR host (utmi) registered
[42949373.900000] mxc_dvfs_core_probe
[42949373.900000] DVFS driver module loaded
[42949373.910000] msgmni has been set to 1007
[42949373.910000] alg: No test for stdrng (krng)
[42949373.910000] io scheduler noop registered
[42949373.910000] io scheduler anticipatory registered
[42949373.910000] io scheduler deadline registered
[42949373.910000] io scheduler cfq registered (default)
[42949373.910000] mode_option=1024x768-16@60
[42949373.910000] modedb fb_find_mode: Trying specified video mode 1024x768
[42949373.910000] modedb fb_try_mode: Trying mode noname 1024x768-16@87
[42949373.910000] modedb fb_try_mode: Trying mode noname 1024x768-16@60
[42949373.920000] mxc_ipu mxc_ipu: Channel already disabled 9
[42949373.920000] mxc_ipu mxc_ipu: Channel already uninitialized 9
[42949373.930000] Console: switching to colour frame buffer device 128x48
[42949373.940000] mxc_sdc_fb mxc_sdc_fb.0: pdev->id=0 name=mxc_sdc_fb
[42949373.940000] mxc_sdc_fb mxc_sdc_fb.0: fbi->fix.id=DISP3 BG 
[42949373.940000] mxc_sdc_fb mxc_sdc_fb.0: <NULL> pix=15384 1024x768@60
[42949373.940000] mxc_sdc_fb mxc_sdc_fb.2: pdev->id=2 name=mxc_sdc_fb
[42949373.940000] mxc_sdc_fb mxc_sdc_fb.2: fbi->fix.id=DISP3 FG 
[42949373.940000] *** sii9022_probe
[42949373.940000] *** sii9022 lcd_probe
[42949373.940000] @_@ lcd_probe vmode= video-mode=2 ce-mode=2 clock_auto=1
[42949374.030000] *** sii9022 lcd_init_fb
[42949374.030000] orig: parent=pll3 clk=260000000 this=ipu_di0_clk di_clk=65000000
[42949374.030000] adjust: parent=pll3 clk=260000000 ret=0 this=ipu_di0_clk di_clk=65000000 ret=0
[42949374.080000] read device id = 0xB0
[42949374.080000] @_@ Monitor is not detected
[42949374.080000] sii9022 1-0039: geometry 1024 768 1024 768 32
[42949374.080000] sii9022 1-0039: timings 15384 160 24 29 3 136 6
[42949374.080000] sii9022 1-0039: accel 0 sync 4 vmode=0
[42949374.090000] sii9022 1-0039: 1024x768@60 pclk:65MHz
[42949374.110000] @_@ sii9022_hdmi_audio_init
[42949374.110000] hdmi audio mute
[42949374.130000] hdmi audio unmute
[42949374.330000] Serial: MXC Internal UART driver
[42949374.340000] mxcintuart.0: ttymxc0 at MMIO 0x73fbc000 (irq = 31) is a Freescale MXC
[42949374.350000] console [ttymxc0] enabled
[42949376.030000] mxcintuart.1: ttymxc1 at MMIO 0x73fc0000 (irq = 32) is a Freescale MXC
[42949376.040000] mxcintuart.2: ttymxc2 at MMIO 0x7000c000 (irq = 33) is a Freescale MXC
[42949376.060000] loop: module loaded
[42949376.070000] usbcore: registered new interface driver rt2500usb
[42949376.080000] usbcore: registered new interface driver rt73usb
[42949376.100000] Linux video capture interface: v2.00
[42949376.110000] MXC Video Output MXC Video Output.0: Registered device video0
[42949376.130000] Driver 'sd' needs updating - please use bus_type methods
[42949376.140000] Driver 'sr' needs updating - please use bus_type methods
[42949376.150000] pata_fsl pata_fsl: rchan=29 wchan=28
[42949376.170000] scsi0 : pata_fsl
[42949376.180000] ata1: PATA max UDMA/44 irq 70
[42949376.370000] ata1.00: ATA-5: Flash Module, Ver2.M1B, max UDMA/100
[42949376.380000] ata1.00: 7535808 sectors, multi 1: LBA 
[42949376.410000] ata1.00: configured for UDMA/44
[42949376.420000] scsi 0:0:0:0: Direct-Access     ATA      Flash Module     Ver2 PQ: 0 ANSI: 5
[42949376.440000] sd 0:0:0:0: [sda] 7535808 512-byte hardware sectors: (3.85 GB/3.59 GiB)
[42949376.450000] sd 0:0:0:0: [sda] Write Protect is off
[42949376.470000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[42949376.480000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[42949376.500000] sd 0:0:0:0: [sda] 7535808 512-byte hardware sectors: (3.85 GB/3.59 GiB)
[42949376.510000] sd 0:0:0:0: [sda] Write Protect is off
[42949376.530000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[42949376.540000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[42949376.560000]  sda: sda1 sda2
[42949376.570000] sd 0:0:0:0: [sda] Attached SCSI disk
[42949376.580000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[42949376.600000] usbmon: debugfs is not available
[42949376.610000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[42949376.850000] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
[42949376.860000] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
[42949376.910000] fsl-ehci fsl-ehci.0: irq 14, io mem 0x73f80200
[42949376.940000] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
[42949376.950000] usb usb1: configuration #1 chosen from 1 choice
[42949376.960000] hub 1-0:1.0: USB hub found
[42949376.980000] hub 1-0:1.0: 1 port detected
[42949377.100000] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
[42949377.110000] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
[42949377.160000] fsl-ehci fsl-ehci.1: irq 18, io mem 0x73f80000
[42949377.190000] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
[42949377.200000] usb usb2: configuration #1 chosen from 1 choice
[42949377.210000] hub 2-0:1.0: USB hub found
[42949377.230000] hub 2-0:1.0: 1 port detected
[42949377.240000] usbcore: registered new interface driver libusual
[42949377.260000] mice: PS/2 mouse device common for all mice
[42949377.270000] MXC keypad loaded
[42949377.280000] mc13892 rtc probe start
[42949377.290000] pmic_rtc pmic_rtc.1: rtc core: registered pmic_rtc as rtc0
[42949377.310000] mc13892 rtc probe succeed
[42949377.320000] usb 1-1: new high speed USB device using fsl-ehci and address 2
[42949377.340000] i2c /dev entries driver
[42949377.350000] MXC WatchDog Driver 2.0
[42949377.360000] clk: Unable to get requested clock: wdog_clk
[42949377.380000] MXC Watchdog # 0 Timer: initial timeout 60 sec
[42949377.390000] pmic_battery: probe of pmic_battery.1 failed with error -1
[42949377.410000] SCC2: Driver Status is OK
[42949377.420000] Sahara HW Version is 0x27000410
[42949377.440000] ioctl pointer: c021b9d8.  mmap pointer: c021c7a8
[42949377.450000] In fsh_shw_smalloc (km): partition_base:e091c000 partition_base_phys: 1fffc000
[42949377.470000] writing UMID and MAP to secure the partition
[42949377.490000] VPU initialized
[42949377.500000] mxsdhci: MXC Secure Digital Host Controller Interface driver
[42949377.510000] mxsdhci: MXC SDHCI Controller Driver. 
[42949377.530000] mmc0: SDHCI detect irq 128 irq 1 INTERNAL DMA
[42949377.550000] mxsdhci: MXC SDHCI Controller Driver. 
[42949377.670000] mmc1: SDHCI detect irq 136 irq 2 INTERNAL DMA
[42949377.680000] usb 1-1: configuration #1 chosen from 1 choice
[42949377.700000] hub 1-1:1.0: USB hub found
[42949377.710000] hub 1-1:1.0: 4 ports detected
[42949377.840000] usbcore: registered new interface driver usbhid
[42949377.850000] usbhid: v2.6:USB HID core driver
[42949377.870000] Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
[42949377.880000] ALSA device list:
[42949377.890000]   No soundcards found.
[42949377.910000] TCP cubic registered
[42949377.920000] NET: Registered protocol family 17
[42949377.930000] ThumbEE CPU extension supported.
[42949377.950000] input: Efika MX Extra Buttons as /devices/virtual/input/input0
[42949377.970000] usb 2-1: new high speed USB device using fsl-ehci and address 2
[42949378.040000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
[42949378.050000] input: mxc_ts as /devices/virtual/input/input1
[42949378.140000] usb 2-1: configuration #1 chosen from 1 choice
[42949378.150000] mxc input touchscreen loaded
[42949378.170000] pmic_rtc pmic_rtc.1: setting system clock to 1970-01-01 00:00:00 UTC (0)
[42949378.270000] usb 1-1.1: new high speed USB device using fsl-ehci and address 3
[42949378.300000] EXT3-fs: sda2: couldn't mount because of unsupported optional features (240).
[42949378.320000] EXT4-fs: barriers enabled
[42949378.330000] kjournald2 starting.  Commit interval 5 seconds
[42949378.400000] usb 1-1.1: configuration #1 chosen from 1 choice
[42949378.550000] EXT4 FS on sda2, internal journal on sda2:8
[42949378.570000] EXT4-fs: delayed allocation enabled
[42949378.580000] EXT4-fs: file extents enabled
[42949378.590000] EXT4-fs: mballoc enabled
[42949378.610000] EXT4-fs: mounted filesystem with ordered data mode.
[42949378.620000] VFS: Mounted root (ext4 filesystem).
[42949378.640000] Freeing init memory: 108K
[42949380.410000] ASoC version 0.13.2
[42949381.130000] eth0: register 'asix' at usb-fsl-ehci.1-1, ASIX AX88772 USB 2.0 Ethernet, 90:e6:ba:9f:70:83
[42949381.180000] usbcore: registered new interface driver asix
[42949381.910000] eth0: link down
[42949382.970000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  156.580000] mmc1: new high speed SD card at address 1234
[  156.600000] mmcblk0: mmc1:1234 SA02G 1.83 GiB 
[  156.620000]  mmcblk0: p1
[  157.400000] mmc1: Card removed and resetting controller.
[  157.420000] mmc1: card 1234 removed
[  159.380000] mmc1: new high speed SD card at address 1234
[  159.400000] mmcblk0: mmc1:1234 SA02G 1.83 GiB 
[  159.420000]  mmcblk0: p1