Status of 2.6 patch for XXS1500 rev A hardware.

Not working:
USB
PCMCIA

Working marginally:
Sound

Untested:
GPIO

Working:
Networking
Flash
(and everything else I think)

Errors from PCMCIA:
> Linux Kernel Card Services
>   options:  none
> au1x00_pcmcia_init: calling driver_register<7>au1x00_pcmcia_init: calling platform_device_register<7>au1x_board_init:205: turning off board
> au1x_board_init:208: probing board
> xxs1500_pcmcia_hw_init:62: turn off power
> xxs1500_pcmcia_socket_state:84: probing state
> xxs1500_pcmcia_socket_state:101: card inserted
> xxs1500_pcmcia_shutdown:70: turn off power
> xxs1500_pcmcia_shutdown:75: assert reset
> au1x_board_init:210: probe result: -22
> au1x00-pcmcia: probe of au1x00-pcmcia0 failed with error -22

Errors from USB:
> Linux Kernel Card Services
> 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (Au1xxx)<7>block sizes: ed 64 td 64
> In ohci_hcd_au1xxx_drv_probe<7>drivers/usb/host/ohci-au1xxx.c: starting Au1xxx OHCI USB Controller
> drivers/usb/host/ohci-au1xxx.c: Clock to USB host has been enabled
> ohci_hcd (Au1xxx) at 0xb0100000, irq 26<6>au1xxx-ohci au1xxx-ohci0: new USB bus registered, assigned bus number 1
> au1xxx-ohci au1xxx-ohci0: ohci_au1xxx_start, ohci:8374fcec<7>au1xxx-ohci au1xxx-ohci0: resetting from state 'reset', control = 0x0
> au1xxx-ohci au1xxx-ohci0: OHCI controller state
> au1xxx-ohci au1xxx-ohci0: OHCI 1.0, with legacy support registers
> au1xxx-ohci au1xxx-ohci0: control 0x083 HCFS=operational CBSR=3
> au1xxx-ohci au1xxx-ohci0: cmdstatus 0x00000 SOC=0
> au1xxx-ohci au1xxx-ohci0: intrstatus 0x00000044 RHSC SF
> au1xxx-ohci au1xxx-ohci0: intrenable 0x8000001a MIE UE RD WDH
> au1xxx-ohci au1xxx-ohci0: hcca frame #0005
> au1xxx-ohci au1xxx-ohci0: roothub.a 02001202 POTPGT=2 NOCP NPS NDP=2
> au1xxx-ohci au1xxx-ohci0: roothub.b 00000000 PPCM=0000 DR=0000
> au1xxx-ohci au1xxx-ohci0: roothub.status 00008000 DRWE
> au1xxx-ohci au1xxx-ohci0: roothub.portstatus [0] 0x00010101 CSC PPS CCS
> au1xxx-ohci au1xxx-ohci0: roothub.portstatus [1] 0x00000100 PPS
> usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: default language 0x0409
> usb usb1: Product: Au1xxx OHCI
> usb usb1: Manufacturer: Linux 2.6.11-rc2 ohci_hcd
> usb usb1: SerialNumber: au1xxx
> usb usb1: hotplug
> usb usb1: adding 1-0:1.0 (config #1, interface 0)
> usb 1-0:1.0: hotplug
> hub 1-0:1.0: usb_probe_interface
> hub 1-0:1.0: usb_probe_interface - got id
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> hub 1-0:1.0: standalone hub
> hub 1-0:1.0: no power switching (usb 1.0)
> hub 1-0:1.0: no over-current protection
> hub 1-0:1.0: power on to power good time: 4ms
> hub 1-0:1.0: local power source is good
> au1xxx-ohci au1xxx-ohci0: created debug files
> hub 1-0:1.0: state 5 ports 2 chg 0006 evt 0007
> au1xxx-ohci au1xxx-ohci0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
> hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
> hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
> au1xxx-ohci au1xxx-ohci0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
> usb 1-1: new low speed USB device using au1xxx-ohci and address 2
> au1xxx-ohci au1xxx-ohci0: urb 835ba8c0 path 1 ep0in 5ec20000 cc 5 --> status -145
> au1xxx-ohci au1xxx-ohci0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
> usb 1-1: device descriptor read/64, error -145
> au1xxx-ohci au1xxx-ohci0: urb 835ba8c0 path 1 ep0in 5ec20000 cc 5 --> status -145
> au1xxx-ohci au1xxx-ohci0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
> usb 1-1: device descriptor read/64, error -145
> au1xxx-ohci au1xxx-ohci0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
> usb 1-1: new low speed USB device using au1xxx-ohci and address 3
> au1xxx-ohci au1xxx-ohci0: urb 835ba8c0 path 1 ep0in 5ec20000 cc 5 --> status -145
> au1xxx-ohci au1xxx-ohci0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
> usb 1-1: device descriptor read/64, error -145
> au1xxx-ohci au1xxx-ohci0: urb 835ba8c0 path 1 ep0in 5ec20000 cc 5 --> status -145
> au1xxx-ohci au1xxx-ohci0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
> usb 1-1: device descriptor read/64, error -145
> hub 1-0:1.0: port 2, status 0100, change 0000, 12 Mb/s
> hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0002