>> init System Maintenance Menu 1) Start System 2) Install System Software 3) Run Diagnostics 4) Recover System 5) Enter Command Monitor Option? 2 Installing System Software... Press to return to the menu. 1) Remote Directory 2)[Local CD-ROM] *a) Local SCSI CD-ROM drive 7 on controller 1 Enter 1-2 to select source type, a to select the source, to quit, or to start: Insert the installation CD-ROM, then press : ARCLoader version 0.4 (c) 2004-5 Stanislaw Skowronek Loading configuration for '/unix'... Detecting system parameters... Loading xio(0)pci(15)scsi(1)cdrom(7)partition(8)/ip30r10k... Reading 5366632 bytes... OK. Entering kernel. Linux version 2.6.12-rc5-mipscvs-20050606-ip30r10k+ (root@khazad-dum) (gcc version 3.4.3-20050110 (Gentoo Linux 3.4.3.20050110-r2, ssp- 3.4.3.20050110-0, pie-8.7.7)) #3 SMP Wed Jun 8 00:38:28 EDT 2005 ARCH: SGI-IP30 PROMLIB: ARC firmware Version 64 Revision 0 CPU revision is: 00000e23 FPU revision is: 00000900 Silicon Graphics Octane (IP30) support: (c) 2004, 2005 Stanislaw Skowronek. xtalk: Detected XBow (revision 1.3) at 0. xtalk: Detected Heart (revision F) at 8. xtalk: Detected HQ4 / ImpactSR (revision B) at 12. xtalk: Detected Bridge (revision C) at 13. xtalk: Detected Bridge (revision D) at 15. xtalk: Initializing a bridge Determined physical RAM map: memory: 0000000000004000 @ 0000000000000000 (reserved) memory: 0000000000efc000 @ 0000000020004000 (usable) memory: 0000000000100000 @ 0000000020f00000 (ROM data) memory: 000000002eff8000 @ 0000000021000000 (usable) memory: 0000000000005000 @ 000000004fff8000 (reserved) memory: 0000000000003000 @ 000000004fffd000 (usable) Initial ramdisk at: 0xa80000002044b000 (294912 bytes) Built 1 zonelists Kernel command line: console=ttyS0,9600 root=/dev/ram0 discord Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes. Primary data cache 32kB, 2-way, linesize 32 bytes. Unified secondary cache 2048kB 2-way, linesize 128 bytes. Synthesized TLB refill handler (41 instructions). Synthesized TLB load handler fastpath (55 instructions). Synthesized TLB store handler fastpath (55 instructions). Synthesized TLB modify handler fastpath (54 instructions). IP30: interrupt controller initialized. PID hash table entries: 4096 (order: 12, 131072 bytes) IP30: initializing timer. 299 MHz CPU detected Using 149.999 MHz high precision timer. Console: colour dummy device 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 758016k/785372k available (3727k kernel code, 26740k reserved, 958k data, 556k init, 0k highmem) Mount-cache hash table entries: 256 Checking for 'wait' instruction... unavailable. Checking for the multiply/shift bug... no. Checking for the daddi bug... no. Checking for the daddiu bug... no. CPU revision is: 00000e23 FPU revision is: 00000900 Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes. Primary data cache 32kB, 2-way, linesize 32 bytes. Unified secondary cache 2048kB 2-way, linesize 128 bytes. Synthesized TLB refill handler (41 instructions). Brought up 2 CPUs checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 288k freed NET: Registered protocol family 16 SCSI subsystem initialized IP30: HEART ATTACK! Caught errors: 0x1040! interrupt #63 interrupt #57 EFS: 1.0a - http://aeschi.ch.eu.org/efs/ JFS: nTxBlock = 5929, nTxLock = 47432 SGI XFS with ACLs, large block/inode numbers, no debug enabled PCI: Fixing ioc3 in [bus:slot.fn] 0000:00:02.0 PCI: Fixing rad1 in [bus:slot.fn] 0000:00:03.0 Console: switching to colour frame buffer device 160x64 fb0: ImpactSR frame buffer device IP30: LEDs, the really good blinkenlights driver. IP30: RTC, the real time clock driver. IP30: IOC3serial, the SuperIO serial port driver. IP30: IOC3serio, the Octane serio driver. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 2 RAM disks of 9216K size 1024 blocksize loop: loaded (max 8 devices) IOC3 SuperIO: registered IOC3 at 900000001f600000, IRQ 12 (chip 0). ttyS0 at IOC3 0x1f620178 (irq = 64) is a 16550A ttyS1 at IOC3 0x1f620170 (irq = 65) is a 16550A Found DS2502 NIC registration number 53:1e:7f:01:00:00, CRC fc. Ethernet address is 08:00:69:0e:11:0c. eth0: link down eth0: Using PHY 0, vendor 0x2000, model 0, rev 3. eth0: IOC3 SSRAM has 128 kbyte. PCI: Enabling device 0000:00:00.0 (0006 -> 0007) qlogicisp : new isp1020 revision ID (5) PCI: Enabling device 0000:00:01.0 (0006 -> 0007) qlogicisp : new isp1020 revision ID (5) scsi0 : QLogic ISP1020 SCSI on PCI bus 00 device 00 irq 8 MEM base 0x900000001f320000 Vendor: FUJITSU Model: MAA3182SCX Rev: 2411 Type: Direct-Access ANSI SCSI revision: 02 scsi1 : QLogic ISP1020 SCSI on PCI bus 00 device 08 irq 9 MEM base 0x900000001f321000 Vendor: TOSHIBA Model: XM-4101TASUNSLCD Rev: 1084 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: XM-4101TASUNSLCD Rev: 1084 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: XM-4101TASUNSLCD Rev: 1084 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: XM-4101TASUNSLCD Rev: 1084 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: XM-4101TASUNSLCD Rev: 1084 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: XM-4101TASUNSLCD Rev: 1084 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: XM-4101TASUNSLCD Rev: 1084 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: XM-4101TASUNSLCD Rev: 1084 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: XM-4101TASUNSLCD Rev: 1084 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: XM-4101TASUNSLCD Rev: 1084 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: XM-4101TASUNSLCD Rev: 1084 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: XM-4101TASUNSLCD Rev: 1084 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: XM-4101TASUNSLCD Rev: 1084 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: XM-4101TASUNSLCD Rev: 1084 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: XM-4101TASUNSLCD Rev: 1084 Type: CD-ROM ANSI SCSI revision: 02 st: Version 20050312, fixed bufsize 32768, s/g segs 256 SCSI device sda: 35803490 512-byte hdwr sectors (18331 MB) SCSI device sda: drive cache: write through SCSI device sda: 35803490 512-byte hdwr sectors (18331 MB) SCSI device sda: drive cache: write through sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda9 sda11 Attached scsi disk sda at scsi0, channel 0, id 1, lun 0 sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.20 sr1: scsi-1 drive sr2: scsi-1 drive sr3: scsi-1 drive sr4: scsi-1 drive sr5: scsi-1 drive sr6: scsi-1 drive sr7: scsi-1 drive sr8: scsi-1 drive sr9: scsi-1 drive sr10: scsi-1 drive sr11: scsi-1 drive sr12: scsi-1 drive sr13: scsi-1 drive sr14: scsi-1 drive Attached scsi generic sg0 at scsi0, channel 0, id 1, lun 0, type 0 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 5 Attached scsi generic sg2 at scsi1, channel 0, id 1, lun 0, type 5 Attached scsi generic sg3 at scsi1, channel 0, id 2, lun 0, type 5 Attached scsi generic sg4 at scsi1, channel 0, id 3, lun 0, type 5 Attached scsi generic sg5 at scsi1, channel 0, id 4, lun 0, type 5 Attached scsi generic sg6 at scsi1, channel 0, id 5, lun 0, type 5 Attached scsi generic sg7 at scsi1, channel 0, id 6, lun 0, type 5 Attached scsi generic sg8 at scsi1, channel 0, id 8, lun 0, type 5 Attached scsi generic sg9 at scsi1, channel 0, id 9, lun 0, type 5 Attached scsi generic sg10 at scsi1, channel 0, id 10, lun 0, type 5 Attached scsi generic sg11 at scsi1, channel 0, id 11, lun 0, type 5 Attached scsi generic sg12 at scsi1, channel 0, id 12, lun 0, type 5 Attached scsi generic sg13 at scsi1, channel 0, id 13, lun 0, type 5 Attached scsi generic sg14 at scsi1, channel 0, id 14, lun 0, type 5 Attached scsi generic sg15 at scsi1, channel 0, id 15, lun 0, type 5 md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid10 personality registered as nr 9 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 75228.000 MB/sec 8regs_prefetch: 728.000 MB/sec 32regs : 760.000 MB/sec 32regs_prefetch: 728.000 MB/sec raid5: using function: 8regs (75228.000 MB/sec) raid6: int64x1 218 MB/s raid6: int64x2 300 MB/s raid6: int64x4 312 MB/s raid6: int64x8 195 MB/s raid6: using algorithm int64x4 (312 MB/s) md: raid6 personality registered as nr 8 md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IOC3serio: timeout in ioc3kbd_write(ff)! IP: routing cache hash table of 8192 buckets, 128Kbytes TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem) readonly. Freeing prom memory: 1024kb freed Freeing unused kernel memory: 1580k freed init started: BusyBox v1.00 (2005.06.02-01:26+0000) multi-call binary Starting pid 31, console /dev/ttyS0: '/linuxrc' atkbd.c: keyboard reset failed on ioc3/serio0 IOC3serio: timeout in ioc3kbd_write(f2)! mount: block device /dev/loop0 is write-protected, mounting read-only IOC3serio: timeout in ioc3kbd_write(ed)! IOC3serio: timeout in ioc3aux_write(ff)! atkbd.c: keyboard reset failed on ioc3/serio1 IOC3serio: timeout in ioc3aux_write(f2)! IOC3serio: timeout in ioc3aux_write(ed)! Gentoo Linux; http://www.gentoo.org/ Copyright 2001-2005 Gentoo Foundation; Distributed under the GPL Gentoo/MIPS LiveCD RC4 for SGI Octane Systems Built on Prickle-Prickle, the 13rd day of Confusion in the YOLD 3171. * To configure networking, do the following: * For Static IP: * /bin/net-setup [telnet] * For Dynamic IP: * /bin/net-setup dhcp [telnet] * If you would like a telnetd daemon loaded as well, pass "telnet" * As the final argument to /bin/net-setup. BusyBox v1.00 (2005.05.30-06:21+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. / #