Linux version 2.6.29-rc5-00334-g116e8cc (root@miranda) (gcc version 4.1.2 (Gentoo 4.1.2 p1.3)) #3 PREEMPT Tue Mar 10 13:40:29 Local time zone must be set--see CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053177 CPU: VIVT data cache, VIVT instruction cache Machine: Marvell SheevaPlug Reference Board Memory policy: ECC disabled, Data cache writeback Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0(uboot)ro,0x1ff00000@0x100000(root) root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) ip=$(ipaddr):$(serverip)$(bootargs_end) nfsroot=192.168.0.3:/tftproot/sheevaplug ip=192.168.0.13:192.168.0.3:::DB88FXX81:eth0:none mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500 mv_phone_config=dev0:fxs,dev1:fxs PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 256MB 256MB = 512MB total Memory: 514048KB available (4372K code, 926K data, 132K init) SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 520 bytes NET: Registered protocol family 16 Kirkwood: MV88F6281-A0, TCLK=200000000. Feroceon L2: Enabling L2 Feroceon L2: Cache support initialised. bio: create slab at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US NET: Registered protocol family 2 IP route cache hash table entries: 16384 (order: 4, 65536 bytes) TCP established hash table entries: 65536 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered NET: Registered protocol family 1 NTFS driver 2.1.29 [Flags: R/W]. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. msgmni has been set to 1004 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A console [ttyS0] enabled loop: module loaded MV-643xx 10/100/1000 ethernet driver version 1.4 mv643xx_eth smi: probed eth0 (mv643xx_eth_port): not using net_device_ops yet net eth0: port 0 with MAC address 00:50:43:01:xx:xx libertas_sdio: Libertas SDIO driver libertas_sdio: Copyright Pierre Ossman Driver 'sd' needs updating - please use bus_type methods NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit) Scanning device for bad blocks Bad eraseblock 763 at 0x000005f60000 Bad eraseblock 1462 at 0x00000b6c0000 Bad eraseblock 2121 at 0x000010920000 Creating 3 MTD partitions on "orion_nand": 0x000000000000-0x000000100000 : "u-boot" 0x000000100000-0x000000500000 : "uImage" 0x000000500000-0x000020000000 : "root" ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver orion-ehci orion-ehci.0: Marvell Orion EHCI orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 i2c /dev entries driver mmc0: mvsdio driver initialized, lacking card detect (fall back to polling) Registered led device: plug:green:health mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. lib80211: common routines for IEEE802.11 drivers rtc-mv rtc-mv: setting system clock to 2037-12-26 19:20:56 UTC (2145468056) usb 1-1: new high speed USB device using orion-ehci and address 2 usb 1-1: configuration #1 chosen from 1 choice scsi0 : SCSI emulation for USB Mass Storage devices IP-Config: Guessing netmask 255.255.255.0 IP-Config: Complete: device=eth0, addr=192.168.0.13, mask=255.255.255.0, gw=255.255.255.255, host=DB88FXX81, domain=, nis-domain=(none), bootserver=192.168.0.3, rootserver=192.168.0.3, rootpath= Looking up port of RPC 100003/2 on 192.168.0.3 eth0: link up, 100 Mb/s, full duplex, flow control disabled Looking up port of RPC 100005/1 on 192.168.0.3 VFS: Mounted root (nfs filesystem) on device 0:13. Freeing init memory: 132K INIT: version 2.86 booting Gentoo Linux; http://www.gentoo.org/ Copyright 1999-2007 Gentoo Foundation; Distributed under the GPLv2 Press I to enter interactive boot mode * Mounting proc at /proc ... [ ok ] * Mounting sysfs at /sys ... [ ok ] * Mounting /dev ... [ ok ] FATAL: Could not load /lib/modules/2.6.29-rc5-00334-g116e8cc/modules.dep: No such file or directory * Starting udevd ... [ ok ] * Populating /dev with existing devices through uevents ... [ ok ] * Waiting for uevents to be processed ... [ ok ] * Mounting devpts at /dev/pts ... [ ok ] mount: can't find / in /etc/fstab or /etc/mtab mount: can't find / in /etc/fstab or /etc/mtab FATAL: Could not load /lib/modules/2.6.29-rc5-00334-g116e8cc/modules.dep: No such file or directory * Checking all filesystems ... [ ok ] * Mounting local filesystems ... [ ok ] * Mounting USB device filesystem (usbfs) ... [ ok ] * Activating (possible) swap ... [ ok ] * Your TIMEZONE in /etc/conf.d/clock is still set to Factory! * Setting system clock using the hardware clock [UTC] ... [ ok ] * Configuring kernel parameters ...Unknown HZ value! (84) Assume 100. [ ok ] * Updating environment ... [ ok ] * Cleaning /var/lock, /var/run ...Unknown HZ value! (84) Assume 100. [ ok ] * Wiping /tmp directory ... [ ok ] * Device initiated services: net.eth0 udev-postmount * Setting hostname to sheevaplug ... [ ok ] * Loading key mappings ... [ ok ] * Setting terminal encoding to UTF-8 ... [ ok ] * Setting user font ... [ ok ] * Starting lo * Bringing up lo * 127.0.0.1/8 [ ok ] * Adding routes * 127.0.0.0/8 ... [ ok ] * Starting eth0 * Keeping current configuration for eth0 [ ok ] * Initializing random number generator ... [ ok ] Unknown HZ value! (89) Assume 100. INIT: Entering runlevel: 3 * Mounting network filesystems ... [ ok ] modprobe: FATAL: Could not load /lib/modules/2.6.29-rc5-00334-g116e8cc/modules.dep: No such file or directory * Starting sshd ...modprobe: FATAL: Could not load /lib/modules/2.6.29-rc5-00334-g116e8cc/modules.dep: No such file or directory modprobe: FATAL: Could not load /lib/modules/2.6.29-rc5-00334-g116e8cc/modules.dep: No such file or directory [ ok ] * Starting local ... [ ok ] Unknown HZ value! (89) Assume 100. This is sheevaplug.unknown_domain (Linux armv5tel 2.6.29-rc5-00334-g116e8cc) 19:21:25 sheevaplug login: modprobe: FATAL: Could not load /lib/modules/2.6.29-rc5-00334-g116e8cc/modules.dep: No such file or directory modprobe: FATAL: Could not load /lib/modules/2.6.29-rc5-00334-g116e8cc/modules.dep: No such file or directory modprobe: FATAL: Could not load /lib/modules/2.6.29-rc5-00334-g116e8cc/modules.dep: No such file or directory